• oracle DBA 常用监控脚本


    oracle DBA 常用监控脚本1(转)

    一、数据库构架体系

    1、表空间的监控是一个重要的任务,我们必须时刻关心表空间的设置,是否满足现在应用的需求,以下的语句可以查询到表空间的详细信息

    SELECT TABLESPACE_NAME,INITIAL_EXTENT,NEXT_EXTENT,MIN_EXTENTS,
    MAX_EXTENTS,PCT_INCREASE,MIN_EXTLEN,STATUS,
    CONTENTS,LOGGING,
    EXTENT_MANAGEMENT, -- Columns not available in v8.0.x
    ALLOCATION_TYPE, -- Remove these columns if running
    PLUGGED_IN, -- against a v8.0.x database
    SEGMENT_SPACE_MANAGEMENT --use only in v9.2.x or later
    FROM DBA_TABLESPACES
    ORDER BY TABLESPACE_NAME;


    2、对于某些数据文件没有设置为自动扩展的表空间来说,如果表空间满了,就将意味着数据库可能会因为没有空间而停止下来。监控表空间,最主要的就是监控剩余空间的大小或者是使用率。以下是监控表空间使用率与剩余空间大小的语句

    SELECT D.TABLESPACE_NAME,SPACE "SUM_SPACE(M)",BLOCKS SUM_BLOCKS,SPACE-NVL(FREE_SPACE,0) "USED_SPACE(M)",
    ROUND((1-NVL(FREE_SPACE,0)/SPACE)*100,2) "USED_RATE(%)",FREE_SPACE "FREE_SPACE(M)"
    FROM
    (SELECT TABLESPACE_NAME,ROUND(SUM(BYTES)/(1024*1024),2) SPACE,SUM(BLOCKS) BLOCKS
    FROM DBA_DATA_FILES
    GROUP BY TABLESPACE_NAME) D,
    (SELECT TABLESPACE_NAME,ROUND(SUM(BYTES)/(1024*1024),2) FREE_SPACE
    FROM DBA_FREE_SPACE
    GROUP BY TABLESPACE_NAME) F
    WHERE D.TABLESPACE_NAME = F.TABLESPACE_NAME(+)
    UNION ALL --if have tempfile
    SELECT D.TABLESPACE_NAME,SPACE "SUM_SPACE(M)",BLOCKS SUM_BLOCKS,
    USED_SPACE "USED_SPACE(M)",ROUND(NVL(USED_SPACE,0)/SPACE*100,2) "USED_RATE(%)",
    NVL(FREE_SPACE,0) "FREE_SPACE(M)"
    FROM
    (SELECT TABLESPACE_NAME,ROUND(SUM(BYTES)/(1024*1024),2) SPACE,SUM(BLOCKS) BLOCKS
    FROM DBA_TEMP_FILES
    GROUP BY TABLESPACE_NAME) D,
    (SELECT TABLESPACE_NAME,ROUND(SUM(BYTES_USED)/(1024*1024),2) USED_SPACE,
    ROUND(SUM(BYTES_FREE)/(1024*1024),2) FREE_SPACE
    FROM V$TEMP_SPACE_HEADER
    GROUP BY TABLESPACE_NAME) F
    WHERE D.TABLESPACE_NAME = F.TABLESPACE_NAME(+)

    3、除了监控表空间的剩余空间,有时候我们也有必要了解一下该表空间是否具有自动扩展空间的能力,虽然我们建议在生产系统中预先分配空间。以下语句将完成这一功能



    SELECT T.TABLESPACE_NAME,D.FILE_NAME,
    D.AUTOEXTENSIBLE,D.BYTES,D.MAXBYTES,D.STATUS
    FROM DBA_TABLESPACES T,
    DBA_DATA_FILES D
    WHERE T. TABLESPACE_NAME =D. TABLESPACE_NAME
    ORDER BY TABLESPACE_NAME,FILE_NAME


    4、我相信使用字典管理的表空间的也不少吧,因为字典管理的表空间中,每个表的下一个区间的大小是不可以预料的,所以我们必须监控那些表在字典管理的表空间中的下一个区间的分配将会引起性能问题或由于是非扩展的表空间而导致系统停止。以下语句检查那些表的扩展将引起表空间的扩展。



    SELECT A.OWNER,A.TABLE_NAME,A.NEXT_EXTENT,A.TABLESPACE_NAME
    FROM ALL_TABLES A,
    (SELECT TABLESPACE_NAME, MAX(BYTES) BIG_CHUNK
    FROM DBA_FREE_SPACE
    GROUP BY TABLESPACE_NAME) F
    WHERE F.TABLESPACE_NAME = A.TABLESPACE_NAME
    AND A.NEXT_EXTENT > F.BIG_CHUNK


    5、段的占用空间与区间数也是很需要注意的一个问题,如果一个段的占用空间太大,或者跨越太多的区间(在字典管理的表空间中,将有严重的性能影响),如果段没有可以再分配的区间,将导致数据库错误。所以,段的大小与区间监控也是一个很重要的工作



    SELECT S.OWNER,S.SEGMENT_NAME,S.SEGMENT_TYPE,S.PARTITION_NAME,
    ROUND(BYTES/(1024*1024),2) "USED_SPACE(M)",
    EXTENTS USED_EXTENTS,S.MAX_EXTENTS,S.BLOCKS ALLOCATED_BLOCKS,
    S.BLOCKS USED_BOLCKS,S.PCT_INCREASE,S.NEXT_EXTENT/1024 "NEXT_EXTENT(K)"
    FROM DBA_SEGMENTS S
    WHERE S.OWNER NOT IN ('SYS','SYSTEM')
    ORDER BY Used_Extents DESC


    6、对象的空间分配与空间利用情况,除了从各个方面的分析,如分析表,查询rowid等方法外,其实oracle提供了一个查询空间的包dbms_space,如果我们稍封装一下,将是非常好用的一个东西。

    CREATE OR REPLACE PROCEDURE show_space
    (p_segname in varchar2,
    p_type in varchar2 default 'TABLE' ,
    p_owner in varchar2 default user)
    AS
    v_segname varchar2(100);
    v_type varchar2(10);
    l_free_blks number;
    l_total_blocks number;
    l_total_bytes number;
    l_unused_blocks number;
    l_unused_bytes number;
    l_LastUsedExtFileId number;
    l_LastUsedExtBlockId number;
    l_LAST_USED_BLOCK number;
    PROCEDURE p( p_label in varchar2, p_num in number )
    IS
    BEGIN
    dbms_output.put_line( rpad(p_label,40,'.')|| p_num );
    END;
    BEGIN
    v_segname := upper(p_segname);
    v_type := p_type;
    if (p_type = 'i' or p_type = 'I') then
    v_type := 'INDEX';
    end if;
    if (p_type = 't' or p_type = 'T') then
    v_type := 'TABLE';
    end if;
    if (p_type = 'c' or p_type = 'C') then
    v_type := 'CLUSTER';
    end if;
    --以下部分不能用于ASSM
    dbms_space.free_blocks
    ( segment_owner => p_owner,
    segment_name => v_segname,
    segment_type => v_type,
    freelist_group_id => 0,
    free_blks => l_free_blks );
    --以上部分不能用于ASSM
    dbms_space.unused_space
    ( segment_owner => p_owner,
    segment_name => v_segname,
    segment_type => v_type,
    total_blocks => l_total_blocks,
    total_bytes => l_total_bytes,
    unused_blocks => l_unused_blocks,
    unused_bytes => l_unused_bytes,
    LAST_USED_EXTENT_FILE_ID => l_LastUsedExtFileId,
    LAST_USED_EXTENT_BLOCK_ID => l_LastUsedExtBlockId,
    LAST_USED_BLOCK => l_LAST_USED_BLOCK );
    --显示结果
    p( 'Free Blocks', l_free_blks );
    p( 'Total Blocks', l_total_blocks );
    p( 'Total Bytes', l_total_bytes );
    p( 'Unused Blocks', l_unused_blocks );
    p( 'Unused Bytes', l_unused_bytes );
    p( 'Last Used Ext FileId', l_LastUsedExtFileId );
    p( 'Last Used Ext BlockId', l_LastUsedExtBlockId );
    p( 'Last Used Block', l_LAST_USED_BLOCK );
    END;


    执行结果将如下所示

    SQL> set serveroutput on;
    SQL> exec show_space('test');
    Free Blocks.............................1
    Total Blocks............................8
    Total Bytes.............................65536
    Unused Blocks...........................6
    Unused Bytes............................49152
    Last Used Ext FileId....................1
    Last Used Ext BlockId...................48521
    Last Used Block.........................2
    PL/SQL procedure successfully completed


    8、数据库的索引如果有比较频繁的Delete操作,将可能导致索引产生很多碎片,所以,在有的时候,需要对所有的索引重新REBUILD,以便合并索引块,减少碎片,提高查询速度。

    SQL> set heading off
    SQL> set feedback off
    SQL> spool d:index.sql
    SQL> SELECT 'alter index ' || index_name || ' rebuild '
    ||'tablespace INDEXES storage(initial 256K next 256K pctincrease 0);'
    FROM all_indexes
    WHERE ( tablespace_name != 'INDEXES'
    OR next_extent != ( 256 * 1024 )
    )
    AND owner = USER
    SQL>spool off


    这个时候,我们打开spool出来的文件,就可以直接运行了。

    9、表的主键是必要的,没有主键的表可以说是不符合设计规范的,所以我们需要监控表是否有主键

    SELECT table_name
    FROM all_tables
    WHERE owner = USER
    MINUS
    SELECT table_name
    FROM all_constraints
    WHERE owner = USER
    AND constraint_type = 'P'

    二、性能监控

    1、数据缓冲区的命中率已经不是性能调整中的主要问题了,但是,过低的命中率肯定是不可以的,在任何情况下,我们必须保证有一个大的data buffer和一个高的命中率。
    这个语句可以获得整体的数据缓冲命中率,越高越好

    SELECT a.VALUE + b.VALUE logical_reads,
    c.VALUE phys_reads,
    round(100*(1-c.value/(a.value+b.value)),4) hit_ratio
    FROM v$sysstat a,v$sysstat b,v$sysstat c
    WHERE a.NAME='db block gets'
    AND b.NAME='consistent gets'
    AND c.NAME='physical reads'


    2、库缓冲说明了SQL语句的重载率,当然,一个SQL语句应当被执行的越多越好,如果重载率比较高,就考虑增加共享池大小或者是提高Bind变量的使用
    以下语句查询了Sql语句的重载率,越低越好



    SELECT SUM(pins) total_pins,SUM(reloads) total_reloads,
    SUM(reloads)/SUM(pins)*100 libcache_reload_ratio
    FROM v$librarycache


    3、用户锁,数据库的锁有的时候是比较耗费资源的,特别是发生锁等待的时候,我们必须找到发生等待的锁,有可能的话,杀掉该进程。
    这个语句将查找到数据库中所有的DML语句产生的锁,还可以发现,任何DML语句其实产生了两个锁,一个是表锁,一个是行锁。
    可以通过alter system kill session ‘sid,serial#’来杀掉会话

    SELECT /*+ rule */ s.username,
    decode(l.type,'TM','TABLE LOCK',
    'TX','ROW LOCK',
    NULL) LOCK_LEVEL,
    o.owner,o.object_name,o.object_type,
    s.sid,s.serial#,s.terminal,s.machine,s.program,s.osuser
    FROM v$session s,v$lock l,dba_objects o
    WHERE l.sid = s.sid
    AND l.id1 = o.object_id(+)
    AND s.username is NOT NULL


    4、锁与等待,如果发生了锁等待,我们可能更想知道是谁锁了表而引起谁的等待
    以下的语句可以查询到谁锁了表,而谁在等待。

    SELECT /*+ rule */ lpad(' ',decode(l.xidusn ,0,3,0))||l.oracle_username User_name,
    o.owner,o.object_name,o.object_type,s.sid,s.serial#
    FROM v$locked_object l,dba_objects o,v$session s
    WHERE l.object_id=o.object_id
    AND l.session_id=s.sid
    ORDER BY o.object_id,xidusn DESC


    以上查询结果是一个树状结构,如果有子节点,则表示有等待发生。如果想知道锁用了哪个回滚段,还可以关联到V$rollname,其中xidusn就是回滚段的USN

    5、如果发生了事务或锁,想知道哪些回滚段正在被使用吗?其实通过事务表,我们可以详细的查询到事务与回滚段之间的关系。同时,如果关联会话表,我们则可以知道是哪个会话发动了这个事务。

    SELECT s.USERNAME,s.SID,s.SERIAL#,t.UBAFIL "UBA filenum",
    t.UBABLK "UBA Block number",t.USED_UBLK "Number os undo Blocks Used",
    t.START_TIME,t.STATUS,t.START_SCNB,t.XIDUSN RollID,r.NAME RollName
    FROM v$session s,v$transaction t,v$rollname r
    WHERE s.SADDR=t.SES_ADDR
    AND t.XIDUSN=r.usn


    7、如果利用会话跟踪或者是想查看某个会话的跟踪文件,那么查询到OS上的进程或线程号是非常重要的,因为文件的令名中,就包含这个信息,以下的语句可以查询到进程或线程号,由此就可以找到对应的文件。

    SELECT p1.value||''||p2.value||'_ora_'||p.spid filename
    FROM
    v$process p,
    v$session s,
    v$parameter p1,
    v$parameter p2
    WHERE p1.name = 'user_dump_dest'
    AND p2.name = 'db_name'
    AND p.addr = s.paddr
    AND s.audsid = USERENV ('SESSIONID');


    8、在ORACLE 9i中,可以监控索引的使用,如果没有使用到的索引,完全可以删除掉,减少DML操作时的操作。
    以下就是开始索引监控与停止索引监控的脚本

    set heading off
    set echo off
    set feedback off
    set pages 10000
    spool start_index_monitor.sql

    SELECT 'alter index '||owner||'.'||index_name||' monitoring usage;'
    FROM dba_indexes
    WHERE owner = USER;

    spool off
    set heading on
    set echo on
    set feedback on
    ------------------------------------------------
    set heading off
    set echo off
    set feedback off
    set pages 10000
    spool stop_index_monitor.sql

    SELECT 'alter index '||owner||'.'||index_name||' nomonitoring usage;'
    FROM dba_indexes
    WHERE owner = USER;

    spool off
    set heading on
    set echo on
    set feedback on

    如果需要监控更多的用户,可以将owner=User改写成别的
    监控结果在视图v$object_usage中查询
    感谢fenng,他提供了一个更新版的show_space脚本



    CREATE OR REPLACE PROCEDURE show_space
    ( p_segname IN VARCHAR2,
    p_owner IN VARCHAR2 DEFAULT USER,
    p_type IN VARCHAR2 DEFAULT 'TABLE',
    p_partition IN VARCHAR2 DEFAULT NULL )
    -- This procedure uses AUTHID CURRENT USER so it can query DBA_*
    -- views using privileges from a ROLE and so it can be installed
    -- once per database, instead of once per user who wanted to use it.
    AUTHID CURRENT_USER
    as
    l_free_blks number;
    l_total_blocks number;
    l_total_bytes number;
    l_unused_blocks number;
    l_unused_bytes number;
    l_LastUsedExtFileId number;
    l_LastUsedExtBlockId number;
    l_LAST_USED_BLOCK number;
    l_segment_space_mgmt varchar2(255);
    l_unformatted_blocks number;
    l_unformatted_bytes number;
    l_fs1_blocks number; l_fs1_bytes number;
    l_fs2_blocks number; l_fs2_bytes number;
    l_fs3_blocks number; l_fs3_bytes number;
    l_fs4_blocks number; l_fs4_bytes number;
    l_full_blocks number; l_full_bytes number;

    -- Inline procedure to print out numbers nicely formatted
    -- with a simple label.
    PROCEDURE p( p_label in varchar2, p_num in number )
    IS
    BEGIN
    dbms_output.put_line( rpad(p_label,40,'.') ||
    to_char(p_num,'999,999,999,999') );
    END;
    BEGIN
    -- This query is executed dynamically in order to allow this procedure
    -- to be created by a user who has access to DBA_SEGMENTS/TABLESPACES
    -- via a role as is customary.
    -- NOTE: at runtime, the invoker MUST have access to these two
    -- views!
    -- This query determines if the object is an ASSM object or not.
    BEGIN
    EXECUTE IMMEDIATE
    'select ts.segment_space_management
    FROM dba_segments seg, dba_tablespaces ts
    WHERE seg.segment_name = :p_segname
    AND (:p_partition is null or
    seg.partition_name = :p_partition)
    AND seg.owner = :p_owner
    AND seg.tablespace_name = ts.tablespace_name'
    INTO l_segment_space_mgmt
    USING p_segname, p_partition, p_partition, p_owner;
    EXCEPTION
    WHEN too_many_rows THEN
    dbms_output.put_line
    ( 'This must be a partitioned table, use p_partition => ');
    RETURN;
    END;

    -- If the object is in an ASSM tablespace, we must use this API
    -- call to get space information; else we use the FREE_BLOCKS
    -- API for the user managed segments.
    IF l_segment_space_mgmt = 'AUTO'
    THEN
    dbms_space.space_usage
    ( p_owner, p_segname, p_type, l_unformatted_blocks,
    l_unformatted_bytes, l_fs1_blocks, l_fs1_bytes,
    l_fs2_blocks, l_fs2_bytes, l_fs3_blocks, l_fs3_bytes,
    l_fs4_blocks, l_fs4_bytes, l_full_blocks, l_full_bytes, p_partition);

    p( 'Unformatted Blocks ', l_unformatted_blocks );
    p( 'FS1 Blocks (0-25) ', l_fs1_blocks );
    p( 'FS2 Blocks (25-50) ', l_fs2_blocks );
    p( 'FS3 Blocks (50-75) ', l_fs3_blocks );
    p( 'FS4 Blocks (75-100)', l_fs4_blocks );
    p( 'Full Blocks ', l_full_blocks );
    ELSE
    dbms_space.free_blocks(
    segment_owner => p_owner,
    segment_name => p_segname,
    segment_type => p_type,
    freelist_group_id => 0,
    free_blks => l_free_blks);

    p( 'Free Blocks', l_free_blks );
    END IF;

    -- And then the unused space API call to get the rest of the
    -- information.
    dbms_space.unused_space
    ( segment_owner => p_owner,
    segment_name => p_segname,
    segment_type => p_type,
    partition_name => p_partition,
    total_blocks => l_total_blocks,
    total_bytes => l_total_bytes,
    unused_blocks => l_unused_blocks,
    unused_bytes => l_unused_bytes,
    LAST_USED_EXTENT_FILE_ID => l_LastUsedExtFileId,
    LAST_USED_EXTENT_BLOCK_ID => l_LastUsedExtBlockId,
    LAST_USED_BLOCK => l_LAST_USED_BLOCK );

    p( 'Total Blocks', l_total_blocks );
    p( 'Total Bytes', l_total_bytes );
    p( 'Total MBytes', trunc(l_total_bytes/1024/1024) );
    p( 'Unused Blocks', l_unused_blocks );
    p( 'Unused Bytes', l_unused_bytes );
    p( 'Last Used Ext FileId', l_LastUsedExtFileId );
    p( 'Last Used Ext BlockId', l_LastUsedExtBlockId );
    p( 'Last Used Block', l_LAST_USED_BLOCK );
    END;


    隐含参数:
    select a.ksppinm "parameter ", a.ksppdesc "descriptoin "
    from x$ksppi a,x$ksppcv b,x$ksppsv c
    where a.indx=b.indx and a.indx=c.indx and a.ksppinm like '/_%' escape '/';

    Check OS process id from Oracle sid


    select spid from v$process
    where addr in ( select paddr from v$session where sid=[$sid) ]


    Check Oracle sid from OS process id

    select sid from v$session
    where paddr in ( select addr from v$process where spid=[$pid) ]


    Check current SQL in a session

    select SQL_TEXT from V$SQLTEXT
    where HASH_VALUE =
    ( select SQL_HASH_VALUE from v$session
    where sid = &sid)
    order by PIECE


    Checking v$session_wait

    select * from v$session_wait
    where event not like 'rdbms%'
    and event not like 'SQL*N%'
    and event not like '%timer';


    Dictionary Cache Hits

    SELECT sum(getmisses)/sum(gets) FROM v$rowcache;
    /*It should be < 15%, otherwise Add share_pool_size*/


    Check DB object name from file id and block#

    select owner,segment_name,segment_type
    from dba_extents
    where file_id = [$fno and &dno between block_id and block_id + blocks – 1 ]


    #寻找hot block
    select /*+ ordered */
    e.owner ||'.'|| e.segment_name segment_name,
    e.extent_id extent#,
    x.dbablk - e.block_id + 1 block#,
    x.tch,
    l.child#
    from
    sys.v$latch_children l,
    sys.x$bh x,
    sys.dba_extents e
    where
    l.name = 'cache buffers chains' and
    l.sleeps > &sleep_count and
    x.hladdr = l.addr and
    e.file_id = x.file# and
    x.dbablk between e.block_id and e.block_id + e.blocks - 1;

    #找出每个文件上的等待事件
    select df.name,kf.count from v$datafile df,x$kcbfwait kf where (kf.indx+1)=df.file#;

    #找出引起等待事件的SQL语句.
    select sql_text from v$sqlarea a,v$session b,v$session_wait c where a.address=b.sql_address and b.sid=c.sid and c.event=[$ll]

    #监控共享池中哪个对象引起了大的内存分配
    SELECT * FROM X$KSMLRU WHERE ksmlrsiz > 0;

    判断你是从pfile启动还是spfile启动的简单方法!!!

    判断你是从pfile启动还是spfile启动的简单方法!!!

    select decode(count(*), 1, 'spfile', 'pfile' )
    from v$spparameter
    where rownum=1
    and isspecified='TRUE'
    /

    DECODE
    ------
    spfile
    ORACLE常用技巧和脚本

    ORACLE常用技巧和脚本
    1.如何查看ORACLE的隐含参数?
    ORACLE的显式参数,除了在INIT.ORA文件中定义的外,在svrmgrl中用"show parameter *",可以显示。但ORACLE还有一些参数是以“_”,开头的。如我们非常熟悉的“_offline_rollback_segments”等。
    这些参数可在sys.x$ksppi表中查出。
    语句:“select ksppinm from x$ksppi where substr(ksppinm,1,1)='_'; ”

    2.如何查看安装了哪些ORACLE组件?
    进入${ORACLE_HOME}/orainst/,运行./inspdver,显示安装组件和版本号。
     
    3.如何查看ORACLE所占用共享内存的大小?
    可用UNIX命令“ipcs”查看共享内存的起始地址、信号量、消息队列。
    在svrmgrl下,用“oradebug ipc”,可看出ORACLE占用共享内存的分段和大小。
    example:
    SVRMGR> oradebug ipc
    -------------- Shared memory --------------
    Seg Id Address Size
    1153 7fe000 784
    1154 800000 419430400
    1155 19800000 67108864

    4.如何查看当前SQL*PLUS用户的sid和serial#?
    在SQL*PLUS下,运行:
    “select sid, serial#, status from v$session
    where audsid=userenv('sessionid');”
     
    5.如何查看当前数据库的字符集?
    在SQL*PLUS下,运行:
    “select userenv('language') from dual;”
    或:“select userenv('lang') from dual; ”
     
    6.如何查看数据库中某用户,正在运行什么SQL语句?
    根据MACHINE、USERNAME或SID、SERIAL#,连接表V$SESSION和V$SQLTEXT,可查出。
    SQL*PLUS语句:
    “SELECT SQL_TEXT FROM V$SQL_TEXT T, V$SESSION S WHERE T.ADDRESS=S.SQL_ADDRESS
    AND T.HASH_VALUE=S.SQL_HASH_VALUE
    AND S.MACHINE='XXXXX' OR USERNAME='XXXXX' -- 查看某主机名,或用户名
    /”
    7.如何删除表中的重复记录?
    例句:
    DELETE
    FROM table_name a
    WHERE rowid > ( SELECT min(rowid)
    FROM table_name b
    WHERE b.pk_column_1 = a.pk_column_1
    and b.pk_column_2 = a.pk_column_2 );

    8.手工临时强制改变服务器字符集
    以sys或system登录系统,sql*plus运行:“create database character set us7ascii;".
    有以下错误提示:
    * create database character set US7ASCII
    ERROR at line 1:
    ORA-01031: insufficient privileges
    实际上,看v$nls_parameters,字符集已更改成功。但重启数据库后,数据库字符集又变回原来的了。
    该命令可用于临时的不同字符集服务器之间数据倒换之用。
    9.怎样查询每个instance分配的PCM锁的数目
    用以下命令:
    select count(*) "Number of hashed PCM locks" from v$lock_element where bitand(flags,4)<>0
    /
    select count(*) "Number of fine grain PCM locks" from v$lock_element
    where bitand(flags,4)=0
    /
    10. 怎么判断当前正在使用何种SQL优化方式?
    用explain plan产生EXPLAIN PLAN,检查PLAN_TABLE中ID=0的POSITION列的值。
    e.g.
    select decode(nvl(position,-1),-1,'RBO',1,'CBO') from plan_table where id=0
    /
    11. 做EXPORT时,能否将DUMP文件分成多个?
    ORACLE8I中EXP增加了一个参数FILESIZE,可将一个文件分成多个:
    EXP SCOTT/TIGER FILE=(ORDER_1.DMP,ORDER_2.DMP,ORDER_3.DMP) FILESIZE=1G TABLES=ORDER;
     
    其他版本的ORACLE在UNIX下可利用管道和split分割:
    mknod pipe p
    split -b 2048m pipe order & #将文件分割成,每个2GB大小的,以order为前缀的文件:
    #orderaa,orderab,orderac,... 并将该进程放在后台。
    EXP SCOTT/TIGER FILE=pipe tables=order
    户如何有效地利用数据字典

    用户如何有效地利用数据字典

    ORACLE的数据字典是数据库的重要组成部分之一,它随着数据库的产生而产生, 随着数据库的变化而变化,
    体现为sys用户下的一些表和视图。数据字典名称是大写的英文字符。

    数据字典里存有用户信息、用户的权限信息、所有数据对象信息、表的约束条件、统计分析数据库的视图等。
    我们不能手工修改数据字典里的信息。

      很多时候,一般的ORACLE用户不知道如何有效地利用它。

      dictionary   全部数据字典表的名称和解释,它有一个同义词dict
    dict_column   全部数据字典表里字段名称和解释

    如果我们想查询跟索引有关的数据字典时,可以用下面这条SQL语句:

    SQL>select * from dictionary where instr(comments,'index')>0;

    如果我们想知道user_indexes表各字段名称的详细含义,可以用下面这条SQL语句:

    SQL>select column_name,comments from dict_columns where table_name='USER_INDEXES';

    依此类推,就可以轻松知道数据字典的详细名称和解释,不用查看ORACLE的其它文档资料了。

    下面按类别列出一些ORACLE用户常用数据字典的查询使用方法。
    一、用户

    查看当前用户的缺省表空间
    SQL>select username,default_tablespace from user_users;

    查看当前用户的角色
    SQL>select * from user_role_privs;

    查看当前用户的系统权限和表级权限
    SQL>select * from user_sys_privs;
    SQL>select * from user_tab_privs;

    二、表

    查看用户下所有的表
    SQL>select * from user_tables;

    查看名称包含log字符的表
    SQL>select object_name,object_id from user_objects
    where instr(object_name,'LOG')>0;

    查看某表的创建时间
    SQL>select object_name,created from user_objects where object_name=upper('&table_name');

    查看某表的大小
    SQL>select sum(bytes)/(1024*1024) as "size(M)" from user_segments
    where segment_name=upper('&table_name');

    查看放在ORACLE的内存区里的表
    SQL>select table_name,cache from user_tables where instr(cache,'Y')>0;

    三、索引

    查看索引个数和类别
    SQL>select index_name,index_type,table_name from user_indexes order by table_name;

    查看索引被索引的字段
    SQL>select * from user_ind_columns where index_name=upper('&index_name');

    查看索引的大小
    SQL>select sum(bytes)/(1024*1024) as "size(M)" from user_segments
    where segment_name=upper('&index_name');

    四、序列号

    查看序列号,last_number是当前值
    SQL>select * from user_sequences;

    五、视图

    查看视图的名称
    SQL>select view_name from user_views;

    查看创建视图的select语句
    SQL>set view_name,text_length from user_views;
    SQL>set long 2000; 说明:可以根据视图的text_length值设定set long 的大小
    SQL>select text from user_views where view_name=upper('&view_name');

    六、同义词

    查看同义词的名称
    SQL>select * from user_synonyms;

    七、约束条件

    查看某表的约束条件
    SQL>select constraint_name, constraint_type,search_condition, r_constraint_name
    from user_constraints where table_name = upper('&table_name');

    SQL>select c.constraint_name,c.constraint_type,cc.column_name
    from user_constraints c,user_cons_columns cc
    where c.owner = upper('&table_owner') and c.table_name = upper('&table_name')
    and c.owner = cc.owner and c.constraint_name = cc.constraint_name
    order by cc.position;

    八、存储函数和过程

    查看函数和过程的状态
    SQL>select object_name,status from user_objects where object_type='FUNCTION';
    SQL>select object_name,status from user_objects where object_type='PROCEDURE';

    查看函数和过程的源代码
    SQL>select text from all_source where owner=user and name=upper('&plsql_name');

    九、触发器

    查看触发器

    set long 50000;
    set heading off;
    set pagesize 2000;

    select
    'create or replace trigger "' ||
    trigger_name || '"' || chr(10)||
    decode( substr( trigger_type, 1, 1 ),
    'A', 'AFTER', 'B', 'BEFORE', 'I', 'INSTEAD OF' ) ||
    chr(10) ||
    triggering_event || chr(10) ||
    'ON "' || table_owner || '"."' ||
    table_name || '"' || chr(10) ||
    decode( instr( trigger_type, 'EACH ROW' ), 0, null,
    'FOR EACH ROW' ) || chr(10) ,
    trigger_body
    from user_triggers;


    --分析数据库性能的SQL

    --用于查看哪些实例的哪些操作使用了大量的临时段

    SELECT to_number(decode(SID, 65535, NULL, SID)) sid,
    operation_type OPERATION,trunc(EXPECTED_SIZE/1024) ESIZE,
    trunc(ACTUAL_MEM_USED/1024) MEM, trunc(MAX_MEM_USED/1024) "MAX MEM",
    NUMBER_PASSES PASS, trunc(TEMPSEG_SIZE/1024) TSIZE
    FROM V$SQL_WORKAREA_ACTIVE
    ORDER BY 1,2;
    ---查询有热块查询的SQL语句
    select hash_value
    from v$sqltext a,
    (select distinct a.owner,a.segment_name,a.segment_type from
    dba_extents a,
    (select dbarfil,dbablk
    from (select dbarfil,dbablk
    from x$bh order by tch desc) where rownum < 11) b
    where a.RELATIVE_FNO = b.dbarfil
    and a.BLOCK_ID <= b.dbablk and a.block_id + a.blocks > b.dbablk) b
    where a.sql_text like '%'||b.segment_name||'%' and b.segment_type = 'TABLE'
    order by a.hash_value,a.address,a.piece;
    --全表扫描
    select opname,target,b.num_rows,b.tablespace_name,count(target) from v$session_longops a,all_all_tables b
    where a.TARGET=b.owner||'.'||b.table_name
    having count(target)>10 group by opname,target,b.num_rows,b.tablespace_name
    --查看磁盘排序和缓存排序次数
    select to_char(sn.snap_time,'yyyy-mm-dd hh24') time_,
    avg(newmen.value - oldmen.value) sorts_memeory,
    avg(newdsk.value - olddsk.value) disk_sort
    from stats$sysstat oldmen,
    stats$sysstat newmen,
    stats$sysstat newdsk,
    stats$sysstat olddsk,
    stats$snapshot sn
    where newdsk.snap_id=sn.snap_id
    and olddsk.snap_id=sn.snap_id-1
    and newmen.snap_id=sn.snap_id
    and newdsk.snap_id=sn.snap_id -1
    and oldmen.name='sorts (memory)'
    and newmen.name='sorts (memory)'
    and olddsk.name='sorts (disk)'
    and newdsk.name='sorts (disk)'
    group by to_char(sn.snap_time,'yyyy-mm-dd hh24')
    --执行最慢的前10个SQL???
    select * from (
    select
    to_char(snap_time,'dd Mon HH24:mi:ss') mydate,
    executions exec,
    loads loads,
    parse_calls parse,
    disk_reads reads,
    buffer_gets gets,
    rows_processed rows_proc,
    sorts sorts,
    sql_text,
    hash_value
    from
    perfstat.stats$sql_summary sql,
    perfstat.stats$snapshot sn
    where
    sql.snap_id >
    (select min(snap_id) min_snap
    from stats$snapshot where snap_time > sysdate-$days_back)
    and
    sql.snap_id = sn.snap_id
    order by $sortskey desc) tt where rownum<11;
    --SQL缓存池的命中率查询(pinhitratio,gethitratio应该大于90%以上)

    select namespace,gethitratio,pinhitratio,reloads,invalidations
    from v$librarycache
    where namespace in ('SQL AREA','TABLE/PROCEDURE','BODY','TRIGGER')


    --数据库的常规参数我就不说了,除了V$parameter中的常规参数外,ORACLE还有大量的隐含参数,下面的语句就可以查询到数据库的所有隐含参数以及其值与参数的描述。
    SELECT NAME
    ,VALUE
    ,decode(isdefault, 'TRUE','Y','N') as "Default"
    ,decode(ISEM,'TRUE','Y','N') as SesMod
    ,decode(ISYM,'IMMEDIATE', 'I',
    'DEFERRED', 'D',
    'FALSE', 'N') as SysMod
    ,decode(IMOD,'MODIFIED','U',
    'SYS_MODIFIED','S','N') as Modified
    ,decode(IADJ,'TRUE','Y','N') as Adjusted
    ,description
    FROM ( --GV$SYSTEM_PARAMETER
    SELECT x.inst_id as instance
    ,x.indx+1
    ,ksppinm as NAME
    ,ksppity
    ,ksppstvl as VALUE
    ,ksppstdf as isdefault
    ,decode(bitand(ksppiflg/256,1),1,'TRUE','FALSE') as ISEM
    ,decode(bitand(ksppiflg/65536,3),
    1,'IMMEDIATE',2,'DEFERRED','FALSE') as ISYM
    ,decode(bitand(ksppstvf,7),1,'MODIFIED','FALSE') as IMOD
    ,decode(bitand(ksppstvf,2),2,'TRUE','FALSE') as IADJ
    ,ksppdesc as DESCRIPTION
    FROM x$ksppi x
    ,x$ksppsv y
    WHERE x.indx = y.indx
    AND substr(ksppinm,1,1) = '_'
    AND x.inst_id = USERENV('Instance')
    )
    ORDER BY NAME
    --想知道现在哪个用户正在利用临时段吗?这个语句将告诉你哪个用户正在利用临时段。

    SELECT b.tablespace, b.segfile#, b.segblk#, b.blocks, a.sid, a.serial#,
    a.username, a.osuser, a.status,c.sql_text
    FROM v$session a,v$sort_usage b, v$sql c
    WHERE a.saddr = b.session_addr
    AND a.sql_address = c.address(+)
    ORDER BY b.tablespace, b.segfile#, b.segblk#, b.blocks;
    --查看磁盘碎片
    select tablespace_name,sqrt(max(blocks)/sum(blocks))*
    (100/sqrt(sqrt(count(blocks)))) FSFI
    from dba_free_space
    group by tablespace_name order by 1
    1.查看表空间的名称及大小
    select t.tablespace_name, round(sum(bytes/(1024*1024)),0) ts_size
    from dba_tablespaces t, dba_data_files d
    where t.tablespace_name = d.tablespace_name
    group by t.tablespace_name;

    2.查看表空间物理文件的名称及大小
    select tablespace_name, file_id, file_name,
    round(bytes/(1024*1024),0) total_space
    from dba_data_files
    order by tablespace_name;

    3.查看回滚段名称及大小
    select segment_name, tablespace_name, r.status,
    (initial_extent/1024) InitialExtent,(next_extent/1024) NextExtent,
    max_extents, v.curext CurExtent
    From dba_rollback_segs r, v$rollstat v
    Where r.segment_id = v.usn(+)
    order by segment_name
    15。耗资源的进程(top session)
    select s.schemaname schema_name, decode(sign(48 - command), 1,
    to_char(command), 'Action Code #' || to_char(command) ) action, status
    session_status, s.osuser os_user_name, s.sid, p.spid , s.serial# serial_num,
    nvl(s.username, ' Oracle process ') user_name, s.terminal terminal,
    s.program program, st.value criteria_value from v$sesstat st, v$session s , v$process p
    where st.sid = s.sid and st.statistic# = to_number('38') and ('ALL' = 'ALL'
    or s.status = 'ALL') and p.addr = s.paddr order by st.value desc, p.spid asc, s.username asc, s.osuser asc

    16。查看锁(lock)情况
    select /*+ RULE */ ls.osuser os_user_name, ls.username user_name,
    decode(ls.type, 'RW', 'Row wait enqueue lock', 'TM', 'DML enqueue lock', 'TX',
    'Transaction enqueue lock', 'UL', 'User supplied lock') lock_type,
    o.object_name object, decode(ls.lmode, 1, null, 2, 'Row Share', 3,
    'Row Exclusive', 4, 'Share', 5, 'Share Row Exclusive', 6, 'Exclusive', null)
    lock_mode, o.owner, ls.sid, ls.serial# serial_num, ls.id1, ls.id2
    from sys.dba_objects o, ( select s.osuser, s.username, l.type,
    l.lmode, s.sid, s.serial#, l.id1, l.id2 from v$session s,
    v$lock l where s.sid = l.sid ) ls where o.object_id = ls.id1 and o.owner
    <> 'SYS' order by o.owner, o.object_name
    --查看低效率的SQL语句
    SELECT EXECUTIONS , DISK_READS, BUFFER_GETS,
    ROUND((BUFFER_GETS-DISK_READS)/BUFFER_GETS,2) Hit_radio,
    ROUND(DISK_READS/EXECUTIONS,2) Reads_per_run,
    SQL_TEXT
    FROM V$SQLAREA
    WHERE EXECUTIONS>0
    AND BUFFER_GETS > 0
    AND (BUFFER_GETS-DISK_READS)/BUFFER_GETS < 0.8
    ORDER BY 4 DESC

  • 相关阅读:
    睡眠错误
    Linux中安装Mysql授权远程访问
    lamp安装
    MySQL 数据类型(Day41)
    MySQL 表操作 (Day40)
    MySQL之存储引擎(Day39)
    MySQL下载安装
    python并发编程之IO模型(Day38)
    同步锁,死锁现象与递归锁,信息量Semaphore.....(Day36)
    多线程并发练习(Day35)
  • 原文地址:https://www.cnblogs.com/weixun/p/3027358.html
Copyright © 2020-2023  润新知