随着固态硬盘的普及,机械硬盘已经不再适合作系统盘了。
linux系统一般会安装在固态银盘上,但是机械键盘仍然有其优势,就是便宜,存储空间大。
查看当前的硬盘一览:
fdisk -l
找到新追加的硬盘,一般为/dev/sdb,为新硬盘简历分区:
fdisk /dev/sdb
命令(输入 m 获取帮助):m 命令操作 a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition g create a new empty GPT partition table G create an IRIX (SGI) partition table l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only)
命令(输入 m 获取帮助):n Partition type: p primary (0 primary, 0 extended, 4 free) e extended Select (default p): Using default response p 分区号 (1-4,默认 1): 起始 扇区 (2048-3221225471,默认为 2048): 将使用默认值 2048 Last 扇区, +扇区 or +size{K,M,G} (2048-3221225471,默认为 3221225471): 将使用默认值 3221225471 分区 1 已设置为 Linux 类型,大小设为 1.5 TiB
fdisk最后要按w以保存分区
命令(输入 m 获取帮助):w The partition table has been altered! Calling ioctl() to re-read partition table. 正在同步磁盘。
格式化分区:
mkfs.xfs -f /dev/sdb1
挂载分区到指定的文件夹
mount /dev/sdb1 /home/data/
其它:
开机即挂载硬盘:
修改/etc/fstab文档
/etc/fstab里面每列大概意思为:
第一列为设备号或该设备的卷标,即需要挂载的文件系统或存储设备;
第二列为挂载点
第三列为文件系统或分区的类型
第四列为文件系统参数,即挂载选项,详细参考man mount.命令,defaults就没有问题,除非你有特殊需求;
第五列为dump选项,设置是否让备份程序dump备份文件系统。0:不备份,1:备份,2:备份(但比1重要性小)。设置了该参数后,linux中使用dump命令备份系统的时候就可以备份相应设置的挂载点了。
第六列为是否在系统启动的时候,用fsck检验分区,告诉fsck程序以什么顺序检查文件系统。因为有些挂载点是不需要检验的,比如:虚拟内存swap、/proc等。0:不检验,1:要检验,2要检验(但比1晚检验),一般根目录设置为1,其他设置为2就可以了。
/dev/sdb1 /home/data xfs defaults 0 0