// While you can edit this file, it's best to put your changes in
// "User/Preferences.sublime-settings", which overrides the settings in here.
//
// Settings may also be placed in file type specific options files, for
// example, in Packages/Python/Python.sublime-settings for python files.
{
// Sets the colors used within the text area
// 主题文件的路径
"color_scheme": "Packages/Color Scheme - Default/Monokai.tmTheme",
// Note that the font_face and font_size are overriden in the platform
// specific settings file, for example, "Preferences (Linux).sublime-settings".
// Because of this, setting them here will have no effect: you must set them
// in your User File Preferences.
// 设置字体和大小，必须在Settings-User里重写，这里设置没有任何效果
"font_face": "Consolas",
"font_size": 16,
// Valid options are "no_bold", "no_italic", "no_antialias", "gray_antialias",
// "subpixel_antialias", "no_round" (OS X only) and "directwrite" (Windows only)
// 字体选项：no_bold不显示粗体字，no_italic不显示斜体字，no_antialias和no_antialias关闭反锯齿
// subpixel_antialias和no_round是OS X系统独有的
"font_options": [],
// Characters that are considered to separate words
// 在文字上双击会全选当前的内容，如果里面出现以下字符，就会被截断
"word_separators": "./\()"'-:,.;<>~!@#$%^&*|+=[]{}`~?",
// Set to false to prevent line numbers being drawn in the gutter
// 是否显示行号
"line_numbers": true,
// Set to false to hide the gutter altogether
// 是否显示行号边栏
"gutter": true,
// Spacing between the gutter and the text
// 行号边栏和文字的间距
"margin": 4,
// Fold buttons are the triangles shown in the gutter to fold regions of text
// 是否显示代码折叠按钮
"fold_buttons": true,
// Hides the fold buttons unless the mouse is over the gutter
// 不管鼠标在不在行号边栏，代码折叠按钮一直显示
"fade_fold_buttons": true,
// Columns in which to display vertical rulers
//列显示垂直标尺，在中括号里填入数字，宽度按字符计算
"rulers": [],
// Set to true to turn spell checking on by default
// 是否打开拼写检查
"spell_check": false,
// The number of spaces a tab is considered equal to
// Tab键制表符宽度
"tab_size": 4,
// Set to true to insert spaces when tab is pressed
// 设为true时，缩进和遇到Tab键时使用空格替代
"translate_tabs_to_spaces": false,
// If translate_tabs_to_spaces is true, use_tab_stops will make tab and
// backspace insert/delete up to the next tabstop
// translate_tabs_to_spaces设置为true，Tab和Backspace的删除/插入作用于制表符宽度
// 否则作用于单个空格
"use_tab_stops": true,
// Set to false to disable detection of tabs vs. spaces on load
// false时禁止在载入的时候检测制表符和空格
"detect_indentation": true,
// Calculates indentation automatically when pressing enter
// 按回车时，自动与制表位对齐
"auto_indent": true,
// Makes auto indent a little smarter, e.g., by indenting the next line
// after an if statement in C. Requires auto_indent to be enabled.
//针对C语言的
"smart_indent": true,
// Adds whitespace up to the first open bracket when indenting. Requires
// auto_indent to be enabled.
// 需要启用auto_indent，第一次打开括号缩进时插入空格？（没测试出来效果…）
"indent_to_bracket": false,
// Trims white space added by auto_indent when moving the caret off the
// line.
// 显示对齐的白线是否根据回车、tab等操作自动填补
"trim_automatic_white_space": true,
// Disables horizontal scrolling if enabled.
// May be set to true, false, or "auto", where it will be disabled for
// source code, and otherwise enabled.
// 是否自动换行，如果选auto，需要加双引号
"word_wrap": "auto",
// Set to a value other than 0 to force wrapping at that column rather than the
// window width
// 设置窗口内文字区域的宽度
"wrap_width": 0,
// Set to false to prevent word wrapped lines from being indented to the same
// level
// 防止被缩进到同一级的字换行
"indent_subsequent_lines": true,
// Draws text centered in the window rather than left aligned
// 如果没有定义过，则文件居中显示（比如新建的文件）
"draw_centered": false,
// Controls auto pairing of quotes, brackets etc
// 自动匹配引号，括号等
"auto_match_enabled": true,
// Word list to use for spell checking
// 拼写检查的单词列表路径
"dictionary": "Packages/Language - English/en_US.dic",
// Set to true to draw a border around the visible rectangle on the minimap.
// The color of the border will be determined by the "minimapBorder" key in
// the color scheme
// 代码地图的可视区域部分是否加上边框，边框的颜色可在配色方案上加入minimapBorder键
"draw_minimap_border": false,
// If enabled, will highlight any line with a caret
// 突出显示当前光标所在的行
"highlight_line": false,
// Valid values are "smooth", "phase", "blink", "wide" and "solid".
// 设置光标闪动方式
"caret_style": "smooth",
// Set to false to disable underlining the brackets surrounding the caret
// 是否特殊显示当前光标所在的括号、代码头尾闭合标记
"match_brackets": true,
// Set to false if you'd rather only highlight the brackets when the caret is
// next to one
// 设为false时，只有光标在括号或头尾闭合标记的两端时，match_brackets才生效
"match_brackets_content": true,
// Set to false to not highlight square brackets. This only takes effect if
// match_brackets is true
// 是否突出显示圆括号，match_brackets为true生效
"match_brackets_square": true,
// Set to false to not highlight curly brackets. This only takes effect if
// match_brackets is true
// 是否突出显示大括号，match_brackets为true生效
"match_brackets_braces": true,
// Set to false to not highlight angle brackets. This only takes effect if
// match_brackets is true
// 是否突出显示尖括号，match_brackets为true生效
"match_brackets_angle": false,
// Enable visualization of the matching tag in HTML and XML
// html和xml下突出显示光标所在标签的两端，影响HTML、XML、CSS等
"match_tags": true,
// Highlights other occurrences of the currently selected text
// 全文突出显示和当前选中字符相同的字符
"match_selection": true,
// Additional spacing at the top of each line, in pixels
// 设置每一行到顶部，以像素为单位的间距，效果相当于行距
"line_padding_top": 0,
// Additional spacing at the bottom of each line, in pixels
// 设置每一行到底部，以像素为单位的间距，效果相当于行距
"line_padding_bottom": 0,
// Set to false to disable scrolling past the end of the buffer.
// On OS X, this value is overridden in the platform specific settings, so
// you'll need to place this line in your user settings to override it.
// 设置为false时，滚动到文本的最下方时，没有缓冲区
"scroll_past_end": true,
// This controls what happens when pressing up or down when on the first
// or last line.
// On OS X, this value is overridden in the platform specific settings, so
// you'll need to place this line in your user settings to override it.
// 控制向上或向下到第一行或最后一行时发生什么（没明白也没试出来）
"move_to_limit_on_up_down": false,
// Set to "none" to turn off drawing white space, "selection" to draw only the
// white space within the selection, and "all" to draw all white space
// 按space或tab时，实际会产生白色的点（一个空格一个点）或白色的横线（tab_size设置的制表符的宽度），选中状态下才能看到
// 设置为none时，什么情况下都不显示这些点和线
// 设置为selection时，只显示选中状态下的点和线
// 设置为all时，则一直显示
"draw_white_space": "selection",
// Set to false to turn off the indentation guides.
// The color and width of the indent guides may be customized by editing
// the corresponding .tmTheme file, and specifying the colors "guide",
// "activeGuide" and "stackGuide"
// 制表位的对齐白线是否显示，颜色可在主题文件里设置（guide，activeGuide，stackGuide）
"draw_indent_guides": true,
// Controls how the indent guides are drawn, valid options are
// "draw_normal" and "draw_active". draw_active will draw the indent
// guides containing the caret in a different color.
// 制表位的对齐白线，draw_normal为一直显示，draw_active为只显示当前光标所在的代码控制域
"indent_guide_options": ["draw_normal"],
// Set to true to removing trailing white space on save
// 为true时，保存文件时会删除每行结束后多余的空格
"trim_trailing_white_space_on_save": false,
// Set to true to ensure the last line of the file ends in a newline
// character when saving
// 为true时，保存文件时光标会在文件的最后向下换一行
"ensure_newline_at_eof_on_save": false,
// Set to true to automatically save files when switching to a different file
// or application
// 切换到其它文件标签或点击其它非本软件区域，文件自动保存
"save_on_focus_lost": false,
// The encoding to use when the encoding can't be determined automatically.
// ASCII, UTF-8 and UTF-16 encodings will be automatically detected.
// 编码时不能自动检测编码时，将自动检测ASCII, UTF-8 和 UTF-16
"fallback_encoding": "Western (Windows 1252)",
// Encoding used when saving new files, and files opened with an undefined
// encoding (e.g., plain ascii files). If a file is opened with a specific
// encoding (either detected or given explicitly), this setting will be
// ignored, and the file will be saved with the encoding it was opened
// with.
// 默认编码格式
"default_encoding": "UTF-8",
// Files containing null bytes are opened as hexadecimal by default
// 包含空字节的文件被打开默认为十六进制
"enable_hexadecimal_encoding": true,
// Determines what character(s) are used to terminate each line in new files.
// Valid values are 'system' (whatever the OS uses), 'windows' (CRLF) and
// 'unix' (LF only).
// 每一行结束的时候用什么字符做终止符
"default_line_ending": "system",
// When enabled, pressing tab will insert the best matching completion.
// When disabled, tab will only trigger snippets or insert a tab.
// Shift+tab can be used to insert an explicit tab when tab_completion is
// enabled.
// 设置为enabled时，在一个字符串间按Tab将插入一个制表符
// 设置为true时，按Tab会根据前后环境进行代码自动匹配填补
"tab_completion": true,
// Enable auto complete to be triggered automatically when typing.
// 代码提示
"auto_complete": true,
// The maximum file size where auto complete will be automatically triggered.
// 代码提示的大小限制
"auto_complete_size_limit": 4194304,
// The delay, in ms, before the auto complete window is shown after typing
// 代码提示延迟显示
"auto_complete_delay": 0,
// Controls what scopes auto complete will be triggered in
// 代码提示的控制范围
"auto_complete_selector": "source - comment",
// Additional situations to trigger auto complete
// 触发代码提示的其他情况
"auto_complete_triggers": [ {"selector": "text.html", "characters": "<"} ],
// By default, auto complete will commit the current completion on enter.
// This setting can be used to make it complete on tab instead.
// Completing on tab is generally a superior option, as it removes
// ambiguity between committing the completion and inserting a newline.
// 设为false时，选择提示的代码按回车或点击可以输出出来，但选择true时不会输出而是直接换行
"auto_complete_commit_on_tab": false,
// Controls if auto complete is shown when snippet fields are active.
// Only relevant if auto_complete_commit_on_tab is true.
// auto_complete_commit_on_tab必须为true，控制代码提示的活跃度（没明白…）
"auto_complete_with_fields": false,
// By default, shift+tab will only unindent if the selection spans
// multiple lines. When pressing shift+tab at other times, it'll insert a
// tab character - this allows tabs to be inserted when tab_completion is
// enabled. Set this to true to make shift+tab always unindent, instead of
// inserting tabs.
// 设置为false，使用Shift + tab总是插入制表符
"shift_tab_unindent": false,
// If true, the copy and cut commands will operate on the current line
// when the selection is empty, rather than doing nothing.
// 选中的文本按Ctrl + f时，自动复制到查找面板的文本框里
"copy_with_empty_selection": true,
// If true, the selected text will be copied into the find panel when it's
// shown.
// On OS X, this value is overridden in the platform specific settings, so
// you'll need to place this line in your user settings to override it.
// 选中的文本按Ctrl + f时，自动复制到查找面板的文本框里
"find_selected_text": true,
// When drag_text is enabled, clicking on selected text will begin a
// drag-drop operation
//拖动文本
"drag_text": true,
//
// User Interface Settings
//
// The theme controls the look of Sublime Text's UI (buttons, tabs, scroll bars, etc)
// DataPackagesTheme – DefaultDefault.sublime-theme控制软件的主题
"theme": "Default.sublime-theme",
// Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to
// scroll slower, or set to larger than 1 to scroll faster
// 滚动的速度
"scroll_speed": 1.0,
// Controls side bar animation when expanding or collapsing folders
// 左边边栏文件夹动画
"tree_animation_enabled": true,
// Makes tabs with modified files more visible
// 高亮未保存文件
"highlight_modified_tabs": false,
// 标签页的关闭按钮
"show_tab_close_buttons": true,
// Show folders in the side bar in bold
// 在侧边栏显示文件夹
"bold_folder_labels": false,
// OS X 10.7 only: Set to true to disable Lion style full screen support.
// Sublime Text must be restarted for this to take effect.
// 针对OS X
"use_simple_full_screen": false,
// OS X only. Valid values are true, false, and "auto". Auto will enable
// the setting when running on a screen 2880 pixels or wider (i.e., a
// Retina display). When this setting is enabled, OpenGL is used to
// accelerate drawing. Sublime Text must be restarted for changes to take
// effect.
// 针对OS X,使用OpenGL画图，需重启
"gpu_window_buffer": "auto",
// Valid values are "system", "enabled" and "disabled"
// 延迟滚动条
"overlay_scroll_bars": "system",
//
// Application Behavior Settings
//
// Exiting the application with hot_exit enabled will cause it to close
// immediately without prompting. Unsaved modifications and open files will
// be preserved and restored when next starting.
//
// Closing a window with an associated project will also close the window
// without prompting, preserving unsaved changes in the workspace file
// alongside the project.
// 热退出功能！如果设置成true，退出时不会提示是否保存文件，而是直接退出，
// 此时无论"remember_open_files"设置成true或者false打开软件后未保存的文件依然
// 存在，如果设置成false，退出时会提示是否保存文件，此时打开软件后未保存的文件
// 是否存在取决于"remember_open_files"设置成true或者false
"hot_exit": true,
// remember_open_files makes the application start up with the last set of
// open files. Changing this to false will have no effect if hot_exit is
// true
// 记忆之前打开的文件
"remember_open_files": true,
// OS X only: When files are opened from finder, or by dragging onto the
// dock icon, this controls if a new window is created or not.
// 始终在新窗口打开文件，针对OS X
"open_files_in_new_window": false,
// OS X only: This controls if an empty window is created at startup or not.
// 在打开程序的时候新建窗口，针对OS X
"create_window_at_startup": true,
// Set to true to close windows as soon as the last file is closed, unless
// there's a folder open within the window. This is always enabled on OS X,
// changing it here won't modify the behavior.
//当没有文件时，关闭程序，针对Windows
"close_windows_when_empty": false,
// Show the full path to files in the title bar.
// On OS X, this value is overridden in the platform specific settings, so
// you'll need to place this line in your user settings to override it.
// 在标题栏显示绝对路径
"show_full_path": true,
// Shows the Build Results panel when building. If set to false, the Build
// Results can be shown via the Tools/Build Results menu.
// 显示面板
"show_panel_on_build": true,
// Preview file contents when clicking on a file in the side bar. Double
// clicking or editing the preview will open the file and assign it a tab.
// 在侧边栏预览文件
"preview_on_click": true,
// folder_exclude_patterns and file_exclude_patterns control which files
// are listed in folders on the side bar. These can also be set on a per-
// project basis.
// 哪些文件会被显示到边栏上
"folder_exclude_patterns": [".svn", ".git", ".hg", "CVS"],
"file_exclude_patterns": ["*.pyc", "*.pyo", "*.exe", "*.dll", "*.obj","*.o", "*.a", "*.lib", "*.so", "*.dylib", "*.ncb", "*.sdf", "*.suo", "*.pdb", "*.idb", ".DS_Store", "*.class", "*.psd", "*.db"],
// These files will still show up in the side bar, but won't be included in
// Goto Anything or Find in Files
"binary_file_patterns": ["*.jpg", "*.jpeg", "*.png", "*.gif", "*.ttf", "*.tga", "*.dds", "*.ico", "*.eot", "*.pdf", "*.swf", "*.jar", "*.zip"],
// List any packages to ignore here. When removing entries from this list,
// a restart may be required if the package contains plugins.
// 删除你想要忽略的插件，需要重启
"ignored_packages": ["Vintage"]
}
