• Akka(15): 持久化模式:AtLeastOnceDelivery-消息保证送达模式


      消息保证送达是指消息发送方保证在任何情况下都会至少一次确定的消息送达。AtleastOnceDelivery是一个独立的trait,主要作用是对不确定已送达的消息进行补发,这是一种自动的操作,无需用户干预。既然涉及到消息的补发,就不可避免地影响发送方和接收方之间消息传递的顺序、接收方重复收到相同的消息等问题,这些用户必须加以关注。从另一个方面,AtleastOnceDelivery模式保证了强韧性Actor系统的不丢失消息,这项要求可能是一些系统的核心要求。

    AtleastOnceDelivery模式既然需要保证消息必达,就必须保证自身在出现任何异常情况下都能恢复到原来的状态,这些都可通过状态持久化来实现。与PersistentActor不同而且更复杂的是AtleastOnceDelivery-Actor的状态除自定义的结构外还必须包括未确认收到的消息(outstanding messages)。所以AtleastOnceDelivery提供了自身特殊的事件(event)和快照(snapshot)类型,它们都包括消息送达状态。

    AtleastOnceDelivery模式的原理是一套收到确认回复机制,是通过deliver,confirmDelivery两个函数实现的。deliver是消息发送函数:

    /**
     * Scala API: Mix-in this trait with your `PersistentActor` to send messages with at-least-once
     * delivery semantics to destinations. It takes care of re-sending messages when they
     * have not been confirmed within a configurable timeout. Use the [[AtLeastOnceDeliveryLike#deliver]] method to
     * send a message to a destination. Call the [[AtLeastOnceDeliveryLike#confirmDelivery]] method when the destination
     * has replied with a confirmation message.
     *
     * At-least-once delivery implies that original message send order is not always retained
     * and the destination may receive duplicate messages due to possible resends.
     *
     * The interval between redelivery attempts can be defined by [[AtLeastOnceDeliveryLike#redeliverInterval]].
     * After a number of delivery attempts a [[AtLeastOnceDelivery.UnconfirmedWarning]] message
     * will be sent to `self`. The re-sending will still continue, but you can choose to call
     * [[AtLeastOnceDeliveryLike#confirmDelivery]] to cancel the re-sending.
     *
     * The `AtLeastOnceDelivery` trait has a state consisting of unconfirmed messages and a
     * sequence number. It does not store this state itself. You must persist events corresponding
     * to the `deliver` and `confirmDelivery` invocations from your `PersistentActor` so that the
     * state can be restored by calling the same methods during the recovery phase of the
     * `PersistentActor`. Sometimes these events can be derived from other business level events,
     * and sometimes you must create separate events. During recovery calls to `deliver`
     * will not send out the message, but it will be sent later if no matching `confirmDelivery`
     * was performed.
     *
     * Support for snapshots is provided by [[AtLeastOnceDeliveryLike#getDeliverySnapshot]] and [[AtLeastOnceDeliveryLike#setDeliverySnapshot]].
     * The `AtLeastOnceDeliverySnapshot` contains the full delivery state, including unconfirmed messages.
     * If you need a custom snapshot for other parts of the actor state you must also include the
     * `AtLeastOnceDeliverySnapshot`. It is serialized using protobuf with the ordinary Akka
     * serialization mechanism. It is easiest to include the bytes of the `AtLeastOnceDeliverySnapshot`
     * as a blob in your custom snapshot.
     *
     * @see [[AtLeastOnceDeliveryLike]]
     * @see [[AbstractPersistentActorWithAtLeastOnceDelivery]] for Java API
     */
    trait AtLeastOnceDelivery extends PersistentActor with AtLeastOnceDeliveryLike {
    
      /**
       * Scala API: Send the message created by the `deliveryIdToMessage` function to
       * the `destination` actor. It will retry sending the message until
       * the delivery is confirmed with [[#confirmDelivery]]. Correlation
       * between `deliver` and `confirmDelivery` is performed with the
       * `deliveryId` that is provided as parameter to the `deliveryIdToMessage`
       * function. The `deliveryId` is typically passed in the message to the
       * destination, which replies with a message containing the same `deliveryId`.
       *
       * The `deliveryId` is a strictly monotonically increasing sequence number without
       * gaps. The same sequence is used for all destinations of the actor, i.e. when sending
       * to multiple destinations the destinations will see gaps in the sequence if no
       * translation is performed.
       *
       * During recovery this method will not send out the message, but it will be sent
       * later if no matching `confirmDelivery` was performed.
       *
       * This method will throw [[AtLeastOnceDelivery.MaxUnconfirmedMessagesExceededException]]
       * if [[#numberOfUnconfirmed]] is greater than or equal to [[#maxUnconfirmedMessages]].
       */
      def deliver(destination: ActorPath)(deliveryIdToMessage: Long ⇒ Any): Unit = {
        internalDeliver(destination)(deliveryIdToMessage)
      }
    
      /**
       * Scala API: Send the message created by the `deliveryIdToMessage` function to
       * the `destination` actor. It will retry sending the message until
       * the delivery is confirmed with [[#confirmDelivery]]. Correlation
       * between `deliver` and `confirmDelivery` is performed with the
       * `deliveryId` that is provided as parameter to the `deliveryIdToMessage`
       * function. The `deliveryId` is typically passed in the message to the
       * destination, which replies with a message containing the same `deliveryId`.
       *
       * The `deliveryId` is a strictly monotonically increasing sequence number without
       * gaps. The same sequence is used for all destinations of the actor, i.e. when sending
       * to multiple destinations the destinations will see gaps in the sequence if no
       * translation is performed.
       *
       * During recovery this method will not send out the message, but it will be sent
       * later if no matching `confirmDelivery` was performed.
       *
       * This method will throw [[AtLeastOnceDelivery.MaxUnconfirmedMessagesExceededException]]
       * if [[#numberOfUnconfirmed]] is greater than or equal to [[#maxUnconfirmedMessages]].
       */
      def deliver(destination: ActorSelection)(deliveryIdToMessage: Long ⇒ Any): Unit = {
        internalDeliver(destination)(deliveryIdToMessage)
      }
    
    }

    deliver自动产生一个deliveryId,这个deliveryId是发送方与接收方沟通的标志。confirmDelivery(deliveryId)用这个id来确认某条消息已经送达:

      /**
       * Call this method when a message has been confirmed by the destination,
       * or to abort re-sending.
       * @see [[#deliver]]
       * @return `true` the first time the `deliveryId` is confirmed, i.e. `false` for duplicate confirm
       */
      def confirmDelivery(deliveryId: Long): Boolean = {
        if (unconfirmed.contains(deliveryId)) {
          unconfirmed -= deliveryId
          true
        } else false
      }

    confirmDelivery同时还被用来取消未确认送达消息。系统对超过配置文件中重发次数设置的消息通过自发送一条UnconformedWarning信息,这个信息包嵌了当前未确认送达消息清单:

     /**
       * @see [[AtLeastOnceDeliveryLike#warnAfterNumberOfUnconfirmedAttempts]]
       */
      @SerialVersionUID(1L)
      case class UnconfirmedWarning(unconfirmedDeliveries: immutable.Seq[UnconfirmedDelivery]) {
        /**
         * Java API
         */
        def getUnconfirmedDeliveries: java.util.List[UnconfirmedDelivery] = {
          import scala.collection.JavaConverters._
          unconfirmedDeliveries.asJava
        }
      }

    unconfirmedDeliveries是在下面这个函数里形成的:

    private def redeliverOverdue(): Unit = {
        val now = System.nanoTime()
        val deadline = now - redeliverInterval.toNanos
        var warnings = Vector.empty[UnconfirmedDelivery]
    
        unconfirmed
          .iterator
          .filter { case (_, delivery) ⇒ delivery.timestamp <= deadline }
          .take(redeliveryBurstLimit)
          .foreach {
            case (deliveryId, delivery) ⇒
              send(deliveryId, delivery, now)
    
              if (delivery.attempt == warnAfterNumberOfUnconfirmedAttempts)
                warnings :+= UnconfirmedDelivery(deliveryId, delivery.destination, delivery.message)
          }
    
        if (warnings.nonEmpty)
          self ! UnconfirmedWarning(warnings)
      }

    在状态恢复和消息处理是都会调用这个redeliverOverdue函数:

     override private[akka] def onReplaySuccess(): Unit = {
        redeliverOverdue()
        startRedeliverTask()
        super.onReplaySuccess()
      }
    
      /**
       * INTERNAL API
       */
      override protected[akka] def aroundReceive(receive: Receive, message: Any): Unit =
        message match {
          case RedeliveryTick ⇒
            redeliverOverdue()
    
          case x ⇒
            super.aroundReceive(receive, message)
        }

    AtLeastOnceDelivery模式的快照snapshot类型定义如下:

    object AtLeastOnceDelivery {
    
      /**
       * Snapshot of current `AtLeastOnceDelivery` state. Can be retrieved with
       * [[AtLeastOnceDeliveryLike#getDeliverySnapshot]] and saved with [[PersistentActor#saveSnapshot]].
       * During recovery the snapshot received in [[SnapshotOffer]] should be set
       * with [[AtLeastOnceDeliveryLike#setDeliverySnapshot]].
       */
      @SerialVersionUID(1L)
      case class AtLeastOnceDeliverySnapshot(currentDeliveryId: Long, unconfirmedDeliveries: immutable.Seq[UnconfirmedDelivery])
        extends Message {
    
        /**
         * Java API
         */
        def getUnconfirmedDeliveries: java.util.List[UnconfirmedDelivery] = {
          import scala.collection.JavaConverters._
          unconfirmedDeliveries.asJava
        }
    
      }

    可以看到这个类型包括了未确认送达清单UnconfirmedDelivery。快照存写和恢复用下面这两个函数: 

    /**
       * Full state of the `AtLeastOnceDelivery`. It can be saved with [[PersistentActor#saveSnapshot]].
       * During recovery the snapshot received in [[SnapshotOffer]] should be set
       * with [[#setDeliverySnapshot]].
       *
       * The `AtLeastOnceDeliverySnapshot` contains the full delivery state, including unconfirmed messages.
       * If you need a custom snapshot for other parts of the actor state you must also include the
       * `AtLeastOnceDeliverySnapshot`. It is serialized using protobuf with the ordinary Akka
       * serialization mechanism. It is easiest to include the bytes of the `AtLeastOnceDeliverySnapshot`
       * as a blob in your custom snapshot.
       */
      def getDeliverySnapshot: AtLeastOnceDeliverySnapshot =
        AtLeastOnceDeliverySnapshot(
          deliverySequenceNr,
          unconfirmed.map { case (deliveryId, d) ⇒ UnconfirmedDelivery(deliveryId, d.destination, d.message) }(breakOut))
    
      /**
       * If snapshot from [[#getDeliverySnapshot]] was saved it will be received during recovery
       * in a [[SnapshotOffer]] message and should be set with this method.
       */
      def setDeliverySnapshot(snapshot: AtLeastOnceDeliverySnapshot): Unit = {
        deliverySequenceNr = snapshot.currentDeliveryId
        val now = System.nanoTime()
        unconfirmed = snapshot.unconfirmedDeliveries.map(d ⇒
          d.deliveryId → Delivery(d.destination, d.message, now, 0))(breakOut)
      }

    我们还是设计个例子来示范保证送达模式:

    package atleastonce.calculation
    import akka.actor._
    import akka.persistence._
    import akka.persistence.AtLeastOnceDelivery._
    import atleastonce.calculator.Calculator
    object CalcAggregator {
      sealed trait Command
      case class Add(x: Int, y: Int) extends Command
      case class Sub(x: Int, y: Int) extends Command
      case class Mul(x: Int, y: Int) extends Command
      case class Div(x: Int, y: Int) extends Command
      case class Result(id: Long, res: Int) extends Command
    /*
      sealed trait Event
      case class Added(x: Int, y: Int) extends Event
      case class Substracted(x: Int, y: Int) extends Event
      case class Multiplied(x: Int, y: Int) extends Event
      case class Divided(x: Int, y: Int) extends Event
      case class GotResult(id: Long, res: Int) extends Event
    
    */
      case class Snap(results: Set[Int], deliverySnapshot: AtLeastOnceDeliverySnapshot)
    }
    
    class CalcAggregator(calculators: Map[String,ActorPath]) extends PersistentActor
      with AtLeastOnceDelivery with ActorLogging {
     import CalcAggregator._
      var results: Set[Int] = Set()
    
      override def persistenceId = "calculation-actor"
    
      //sending commands and update state only with delivery ack
      def updateState(cmd: Command) = cmd match {
        case Add(x,y) => deliver(calculators("ADD")){id => Calculator.Add(id,x,y)}
        case Sub(x,y) => deliver(calculators("SUB")){id => Calculator.Sub(id,x,y)}
        case Mul(x,y) => deliver(calculators("MUL")){id => Calculator.Mul(id,x,y)}
        case Div(x,y) => deliver(calculators("DIV")){id => Calculator.Div(id,x,y)}
        case Result(id,res) =>
          results += res
          confirmDelivery(id)
      }
    
      override def receiveCommand: Receive = {
        case cmd: Command => persistAsync(cmd){updateState}
    
        case UnconfirmedWarning(unconfirmedDeliveries) =>  //cancel outstanding message
          unconfirmedDeliveries.foreach{u => confirmDelivery(u.deliveryId)}
      }
    
      override def receiveRecover: Receive = {
        case cmd: Command => updateState(cmd)
        case SnapshotOffer(_,snap: Snap) =>
          results = snap.results
          setDeliverySnapshot(snap.deliverySnapshot)
      }
    
    }

    以上是一个典型的任务分发器,主要功能是通过发送指令消息驱动其它Calculator Actor进行运算,我们希望保证发出的指令都能送达。首先,指令和事件是一一对应的,无需进行指令事件转换,可以统一直接采用指令。再就是存写指令时无需验证,因为状态results更新是在收到指令接收方回复Results(id,res)之后进行的。从这个例子比较简单的功能操作中我们可明显感觉到写入日志的流量:CalcAggregator好像就是在不断的把经历的指令写入日志然后等待回复,回复时间就是Calculator运算时间。试想下次启动系统进行日志重演时会怎样:启动时间长度等于系统累积运算的时间长度。这很可怕,花几个小时来恢复状态可能是常态。所以必须充分利用快照,采用一套有效的日志、快照维护方式来提高状态恢复效率。下面是加入了日志快照维护功能的新代码:

    package atleastonce.calculation
    import akka.actor._
    import akka.persistence._
    import akka.persistence.AtLeastOnceDelivery._
    import atleastonce.calculator.Calculator
    import scala.util.control.NoStackTrace
    
    object CalcAggregator {
      sealed trait Command
      case class Add(x: Int, y: Int) extends Command
      case class Sub(x: Int, y: Int) extends Command
      case class Mul(x: Int, y: Int) extends Command
      case class Div(x: Int, y: Int) extends Command
      case class Result(id: Long, res: Int) extends Command
    /*
      sealed trait Event
      case class Added(x: Int, y: Int) extends Event
      case class Substracted(x: Int, y: Int) extends Event
      case class Multiplied(x: Int, y: Int) extends Event
      case class Divided(x: Int, y: Int) extends Event
      case class GotResult(id: Long, res: Int) extends Event
    */
      case class Snap(results: List[Int],
                      deliverySnapshot: AtLeastOnceDeliverySnapshot)
    
    
      case object ShowResults
      case object Boom
      case object ClearJournal
    
    
      def props(calculators: Map[String,ActorRef],keepJournalNr: Int) =
        Props(new CalcAggregator(calculators,keepJournalNr))
    }
    
    class CalcAggregator(calculators: Map[String,ActorRef],keepJournalNr: Int)
      extends PersistentActor with AtLeastOnceDelivery with ActorLogging {
      import CalcAggregator._
      var results: List[Int] = List()
      var resultsId: Int = 0
      override def persistenceId = "calculation-actor023"
    
      //sending commands and update state only with delivery ack
      def updateState(cmd: Command) = {
        if (!recoveryRunning && !cmd.isInstanceOf[Result])
            log.info(s"Sending command message: $cmd at: $lastSequenceNr")
    
        cmd match {
          case Add(x,y) => deliver(calculators("ADD").path){id => Calculator.Add(id,x,y)}
          case Sub(x,y) => deliver(calculators("SUB").path){id => Calculator.Sub(id,x,y)}
          case Mul(x,y) => deliver(calculators("MUL").path){id => Calculator.Mul(id,x,y)}
          case Div(x,y) => deliver(calculators("DIV").path){id => Calculator.Div(id,x,y)}
          case Result(id,res) =>
            log.info(s"Receive calculation result $res with ack id: $id")
            if ( res != 0) {
              results = res :: results
              confirmDelivery(id)
              log.info(s"Current state updated to: $results at $lastSequenceNr")
              resultsId += 1
              if (resultsId % keepJournalNr == 0) {
                resultsId = 0
                saveSnapshot(Snap(results, getDeliverySnapshot))
                log.info(s"Saving snapshot with state $results, snapshot: $getDeliverySnapshot")
              }
            }
        }
      }
    
      override def receiveCommand: Receive = {
        case cmd: Command => persist(cmd){updateState}
        case ack: Calculator.Ack =>
          updateState(Result(ack.id,ack.x))
          
        case UnconfirmedWarning(unconfirmedDeliveries) =>  //cancel outstanding message
          log.info(s"UnconfirmedWarning: $unconfirmedDeliveries ...")
          unconfirmedDeliveries.foreach{u =>
            log.info(s"Cancelling unconfirmedDeliveris $u")
            confirmDelivery(u.deliveryId)}
    
        case SaveSnapshotSuccess(m) =>
          log.info(s"Sucessfull saving snapshot: ${m} at: $lastSequenceNr")
          //clear journal and snapshot
          deleteSnapshots(SnapshotSelectionCriteria(maxSequenceNr = m.sequenceNr - 1))
          deleteMessages(m.sequenceNr)
        case SaveSnapshotFailure(m,cause) =>
          log.info(s"Saving snapshot failed because: ${cause}")
        case DeleteMessagesSuccess(toSeq) =>
          log.info(s"Succefull deleting journal upto: $toSeq")
        case DeleteMessagesFailure(cause,toSeq) =>
          log.info(s"Failed to delete journal upto: $toSeq because: $cause")
        case DeleteSnapshotsSuccess(crit) =>
          log.info(s"Successful delete snapshots for $crit")
        case DeleteSnapshotSuccess(m) =>
          log.info(s"Successful delete snapshot upto: ${m.sequenceNr}")
        case DeleteSnapshotsFailure(crit,cause) =>
          log.info(s"Failed to delete snapshots $crit because: $cause")
        case DeleteSnapshotFailure(m,cause) =>
          log.info(s"Failed to delete snapshot upto: ${m.sequenceNr} because: $cause")
    
        case ShowResults =>
          log.info(s"Show Current State: $results and lastSequenceNr : $lastSequenceNr")
    
        case "TakeSnapshot" =>
          log.info(s"Saving snapshot with state: $results ...")
          saveSnapshot(Snap(results, getDeliverySnapshot))
    
        case Boom =>
          log.info("Boom!")
          throw new RuntimeException("boom") with NoStackTrace
        case ClearJournal =>
          deleteMessages(lastSequenceNr)
          deleteSnapshots(SnapshotSelectionCriteria(maxSequenceNr = lastSequenceNr))
    
      }
    
      override def receiveRecover: Receive = {
        case cmd: Command => updateState(cmd)
          log.info(s"Replaying command: $cmd")
        case SnapshotOffer(md,snap: Snap) =>
          log.info(s"Loading snapshot at: ${md.sequenceNr} with state: ${snap.results}")
          results = snap.results
          setDeliverySnapshot(snap.deliverySnapshot)
          log.info(s"Updated state to $results with snapshot")
        case RecoveryCompleted =>
          log.info(s"Recovery compeleted with State: $results and lastSequenceNr=$lastSequenceNr")
      }
    
      override def preRestart(reason: Throwable, message: Option[Any]): Unit = {
        log.info(s"Aggregator restarting with reason: ${reason.getMessage}")
        super.preRestart(reason, message)
      }
    
      override def warnAfterNumberOfUnconfirmedAttempts = 1
    }

    当收到Calculator运算结果次数大于等于保留日志长度keepJournal则把快照写入一次: 

        case Result(id,res) =>
            log.info(s"Receive calculation result $res with ack id: $id")
            if ( res != 0) {
              results = res :: results
              confirmDelivery(id)
              log.info(s"Current state updated to: $results at $lastSequenceNr")
              resultsId += 1
              if (resultsId % keepJournalNr == 0) {
                resultsId = 0
                saveSnapshot(Snap(results, getDeliverySnapshot))
                log.info(s"Saving snapshot with state $results, snapshot: $getDeliverySnapshot")
              }
            }

    每次快照写入成功则把之前的Journal和Snapshot都删除:

      case SaveSnapshotSuccess(m) =>
          log.info(s"Sucessfull saving snapshot: ${m} at: $lastSequenceNr")
          //clear journal and snapshot
          deleteSnapshots(SnapshotSelectionCriteria(maxSequenceNr = m.sequenceNr - 1))
          deleteMessages(m.sequenceNr)

    使用了下面这段代码来测试:

    package atleastonce.demo
    import atleastonce.calculation.CalcAggregator
    import atleastonce.calculation.CalcAggregator._
    import atleastonce.calculator.Calculator
    import akka.actor._
    
    object AtLeastOnceDemo extends App {
      val atLeastOnceSystem = ActorSystem("atleastonceSystem")
    
      val addActor = atLeastOnceSystem.actorOf(Calculator.props,"addActor")
      val subActor = atLeastOnceSystem.actorOf(Calculator.props,"subActor")
      val mulActor = atLeastOnceSystem.actorOf(Calculator.props,"mulActor")
      val divActor = atLeastOnceSystem.actorOf(Calculator.props,"divActor")
      var actors = Map[String,ActorRef]()
      actors += ("ADD" -> addActor)
      actors += ("SUB" -> subActor)
      actors += ("MUL" -> mulActor)
      actors += ("DIV" -> divActor)
    
    
      val aggregator = atLeastOnceSystem.actorOf(CalcAggregator.props(actors,5), "aggregator")
    
    
      aggregator ! Sub(0,0)
      aggregator ! Add(6,3)
      aggregator ! Sub(8,0)
      aggregator ! Mul(3,2)
      aggregator ! Boom
      aggregator ! Div(12,3)
      Thread.sleep(10000)
      aggregator ! ShowResults
    
     // aggregator ! ClearJournal
    
    
      scala.io.StdIn.readLine()
      atLeastOnceSystem.terminate()
    
    
    }

    连续运算几次,状态都恢复正确。

    下面是本次示范的源代码:

    build.sbt

    name := "atleastonce-delivery"
    
    version := "1.0"
    
    scalaVersion := "2.11.9"
    
    sbtVersion := "0.13.5"
    
    libraryDependencies ++= Seq(
      "com.typesafe.akka"           %% "akka-actor"       % "2.5.3",
      "com.typesafe.akka"           %% "akka-persistence" % "2.5.3",
      "ch.qos.logback" % "logback-classic" % "1.1.7",
      "com.typesafe.akka" %% "akka-persistence-cassandra" % "0.54",
      "com.typesafe.akka" %% "akka-persistence-cassandra-launcher" % "0.54" % Test
    )

    application.conf

    akka {
      persistence {
        journal.plugin = "cassandra-journal"
        snapshot-store.plugin = "cassandra-snapshot-store"
      }
    }
    akka.actor.warn-about-java-serializer-usage = off
    akka.persistence.at-least-once-delivery.warn-after-number-of-unconfirmed-attempts = 1

    Calculator.scala

    package atleastonce.calculator
    import akka.actor._
    import scala.util.Random
    import scala.concurrent.duration._
    object Calculator {
      sealed trait Math
      case class Add(id: Long, x: Int, y: Int) extends Math
      case class Sub(id: Long, x: Int, y: Int) extends Math
      case class Mul(id: Long, x: Int, y: Int) extends Math
      case class Div(id: Long, x: Int, y: Int) extends Math
    
      case class Ack(id: Long, x: Int)
      case class CalcMath(expr: Math)
    
      def props = Props(new Calculator)
    
    }
    
    class Calculator extends Actor with ActorLogging {
      import Calculator._
      import context.dispatcher
      override def receive: Receive = {
        case CalcMath(expr) => {
          val delay: FiniteDuration = (100 millis) * Random.nextInt(10)
          context.system.scheduler.scheduleOnce(delay,self,expr)
        }
        case add: Add => sender() ! Ack(add.id,add.x + add.y)
        case sub: Sub => sender() ! Ack(sub.id,sub.x - sub.y)
        case mul: Mul => sender() ! Ack(mul.id,mul.x * mul.y)
        case div: Div => sender() ! Ack(div.id,div.x / div.y)
      }
    }

    CalcAggregator

    package atleastonce.calculation
    import akka.actor._
    import akka.persistence._
    import akka.persistence.AtLeastOnceDelivery._
    import atleastonce.calculator.Calculator
    import scala.util.control.NoStackTrace
    
    object CalcAggregator {
      sealed trait Command
      case class Add(x: Int, y: Int) extends Command
      case class Sub(x: Int, y: Int) extends Command
      case class Mul(x: Int, y: Int) extends Command
      case class Div(x: Int, y: Int) extends Command
      case class Result(id: Long, res: Int) extends Command
    /*
      sealed trait Event
      case class Added(x: Int, y: Int) extends Event
      case class Substracted(x: Int, y: Int) extends Event
      case class Multiplied(x: Int, y: Int) extends Event
      case class Divided(x: Int, y: Int) extends Event
      case class GotResult(id: Long, res: Int) extends Event
    */
      case class Snap(results: List[Int],
                      deliverySnapshot: AtLeastOnceDeliverySnapshot)
    
    
      case object ShowResults
      case object Boom
      case object ClearJournal
    
    
      def props(calculators: Map[String,ActorRef],keepJournalNr: Int) =
        Props(new CalcAggregator(calculators,keepJournalNr))
    }
    
    class CalcAggregator(calculators: Map[String,ActorRef],keepJournalNr: Int)
      extends PersistentActor with AtLeastOnceDelivery with ActorLogging {
      import CalcAggregator._
      var results: List[Int] = List()
      var resultsId: Int = 0
      override def persistenceId = "calculation-actor023"
    
      //sending commands and update state only with delivery ack
      def updateState(cmd: Command) = {
        if (!recoveryRunning && !cmd.isInstanceOf[Result])
            log.info(s"Sending command message: $cmd at: $lastSequenceNr")
    
        cmd match {
          case Add(x,y) => deliver(calculators("ADD").path){id => Calculator.Add(id,x,y)}
          case Sub(x,y) => deliver(calculators("SUB").path){id => Calculator.Sub(id,x,y)}
          case Mul(x,y) => deliver(calculators("MUL").path){id => Calculator.Mul(id,x,y)}
          case Div(x,y) => deliver(calculators("DIV").path){id => Calculator.Div(id,x,y)}
          case Result(id,res) =>
            log.info(s"Receive calculation result $res with ack id: $id")
            if ( res != 0) {
              results = res :: results
              confirmDelivery(id)
              log.info(s"Current state updated to: $results at $lastSequenceNr")
              resultsId += 1
              if (resultsId % keepJournalNr == 0) {
                resultsId = 0
                saveSnapshot(Snap(results, getDeliverySnapshot))
                log.info(s"Saving snapshot with state $results, snapshot: $getDeliverySnapshot")
              }
            }
        }
      }
    
      override def receiveCommand: Receive = {
        case cmd: Command => persist(cmd){updateState}
        case ack: Calculator.Ack =>
          updateState(Result(ack.id,ack.x))
    
        case UnconfirmedWarning(unconfirmedDeliveries) =>  //cancel outstanding message
          log.info(s"UnconfirmedWarning: $unconfirmedDeliveries ...")
          unconfirmedDeliveries.foreach{u =>
            log.info(s"Cancelling unconfirmedDeliveris $u")
            confirmDelivery(u.deliveryId)}
    
        case SaveSnapshotSuccess(m) =>
          log.info(s"Sucessfull saving snapshot: ${m} at: $lastSequenceNr")
          //clear journal and snapshot
          deleteSnapshots(SnapshotSelectionCriteria(maxSequenceNr = m.sequenceNr - 1))
          deleteMessages(m.sequenceNr)
        case SaveSnapshotFailure(m,cause) =>
          log.info(s"Saving snapshot failed because: ${cause}")
        case DeleteMessagesSuccess(toSeq) =>
          log.info(s"Succefull deleting journal upto: $toSeq")
        case DeleteMessagesFailure(cause,toSeq) =>
          log.info(s"Failed to delete journal upto: $toSeq because: $cause")
        case DeleteSnapshotsSuccess(crit) =>
          log.info(s"Successful delete snapshots for $crit")
        case DeleteSnapshotSuccess(m) =>
          log.info(s"Successful delete snapshot upto: ${m.sequenceNr}")
        case DeleteSnapshotsFailure(crit,cause) =>
          log.info(s"Failed to delete snapshots $crit because: $cause")
        case DeleteSnapshotFailure(m,cause) =>
          log.info(s"Failed to delete snapshot upto: ${m.sequenceNr} because: $cause")
    
        case ShowResults =>
          log.info(s"Show Current State: $results and lastSequenceNr : $lastSequenceNr")
    
        case "TakeSnapshot" =>
          log.info(s"Saving snapshot with state: $results ...")
          saveSnapshot(Snap(results, getDeliverySnapshot))
    
        case Boom =>
          log.info("Boom!")
          throw new RuntimeException("boom") with NoStackTrace
        case ClearJournal =>
          deleteMessages(lastSequenceNr)
          deleteSnapshots(SnapshotSelectionCriteria(maxSequenceNr = lastSequenceNr))
    
      }
    
      override def receiveRecover: Receive = {
        case cmd: Command => updateState(cmd)
          log.info(s"Replaying command: $cmd")
        case SnapshotOffer(md,snap: Snap) =>
          log.info(s"Loading snapshot at: ${md.sequenceNr} with state: ${snap.results}")
          results = snap.results
          setDeliverySnapshot(snap.deliverySnapshot)
          log.info(s"Updated state to $results with snapshot")
        case RecoveryCompleted =>
          log.info(s"Recovery compeleted with State: $results and lastSequenceNr=$lastSequenceNr")
      }
    
      override def preRestart(reason: Throwable, message: Option[Any]): Unit = {
        log.info(s"Aggregator restarting with reason: ${reason.getMessage}")
        super.preRestart(reason, message)
      }
    
      override def warnAfterNumberOfUnconfirmedAttempts = 1
    }


    AtLeastOnceDemo.scala

    package atleastonce.demo
    import atleastonce.calculation.CalcAggregator
    import atleastonce.calculation.CalcAggregator._
    import atleastonce.calculator.Calculator
    import akka.actor._
    
    object AtLeastOnceDemo extends App {
      val atLeastOnceSystem = ActorSystem("atleastonceSystem")
    
      val addActor = atLeastOnceSystem.actorOf(Calculator.props,"addActor")
      val subActor = atLeastOnceSystem.actorOf(Calculator.props,"subActor")
      val mulActor = atLeastOnceSystem.actorOf(Calculator.props,"mulActor")
      val divActor = atLeastOnceSystem.actorOf(Calculator.props,"divActor")
      var actors = Map[String,ActorRef]()
      actors += ("ADD" -> addActor)
      actors += ("SUB" -> subActor)
      actors += ("MUL" -> mulActor)
      actors += ("DIV" -> divActor)
    
    
      val aggregator = atLeastOnceSystem.actorOf(CalcAggregator.props(actors,5), "aggregator")
    
    
      aggregator ! Sub(0,0)
      aggregator ! Add(6,3)
      aggregator ! Sub(8,0)
      aggregator ! Mul(3,2)
      aggregator ! Boom
      aggregator ! Div(12,3)
      Thread.sleep(10000)
      aggregator ! ShowResults
    
     // aggregator ! ClearJournal
    
    
    
      scala.io.StdIn.readLine()
      atLeastOnceSystem.terminate()
    
    
    }

     

     

     

     

     

     

     

     

     

  • 相关阅读:
    吴裕雄--天生自然 诗经:天净沙·秋思
    阿里云Kubernetes服务
    一探究竟:善用 MaxCompute Studio 分析 SQL 作业
    MaxCompute Studio 使用入门
    AI 一体机,满足新时代的新需求
    OSS重磅推出OSS Select——使用SQL选取文件的内容
    如何将DynamoDB的数据增量迁移到表格存储
    多隆:淘宝第一行代码撰写者的程序世界
    专访阿里巴巴量子实验室:最强量子电路模拟器“太章”到底强在哪?
    饿了么CTO张雪峰:允许90后的技术人员“浮躁“一点
  • 原文地址:https://www.cnblogs.com/tiger-xc/p/7231347.html
Copyright © 2020-2023  润新知