• [Swift]LeetCode495. 提莫攻击 | Teemo Attacking


    ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
    ➤微信公众号:山青咏芝(shanqingyongzhi)
    ➤博客园地址:山青咏芝(https://www.cnblogs.com/strengthen/
    ➤GitHub地址:https://github.com/strengthen/LeetCode
    ➤原文地址:https://www.cnblogs.com/strengthen/p/10370594.html 
    ➤如果链接不是山青咏芝的博客园地址,则可能是爬取作者的文章。
    ➤原文已修改更新!强烈建议点击原文地址阅读!支持作者!支持原创!
    ★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★

    In LOL world, there is a hero called Teemo and his attacking can make his enemy Ashe be in poisoned condition. Now, given the Teemo's attacking ascending time series towards Ashe and the poisoning time duration per Teemo's attacking, you need to output the total time that Ashe is in poisoned condition.

    You may assume that Teemo attacks at the very beginning of a specific time point, and makes Ashe be in poisoned condition immediately.

    Example 1:

    Input: [1,4], 2
    Output: 4
    Explanation: At time point 1, Teemo starts attacking Ashe and makes Ashe be poisoned immediately. 
    This poisoned status will last 2 seconds until the end of time point 2.
    And at time point 4, Teemo attacks Ashe again, and causes Ashe to be in poisoned status for another 2 seconds.
    So you finally need to output 4.

    Example 2:

    Input: [1,2], 2
    Output: 3
    Explanation: At time point 1, Teemo starts attacking Ashe and makes Ashe be poisoned. 
    This poisoned status will last 2 seconds until the end of time point 2.
    However, at the beginning of time point 2, Teemo attacks Ashe again who is already in poisoned status.
    Since the poisoned status won't add up together, though the second poisoning attack will still work at time point 2, it will stop at the end of time point 3.
    So you finally need to output 3.

    Note:

    1. You may assume the length of given time series array won't exceed 10000.
    2. You may assume the numbers in the Teemo's attacking time series and his poisoning time duration per attacking are non-negative integers, which won't exceed 10,000,000.

    在《英雄联盟》的世界中,有一个叫 “提莫” 的英雄,他的攻击可以让敌方英雄艾希(编者注:寒冰射手)进入中毒状态。现在,给出提莫对艾希的攻击时间序列和提莫攻击的中毒持续时间,你需要输出艾希的中毒状态总时长。

    你可以认为提莫在给定的时间点进行攻击,并立即使艾希处于中毒状态。

    示例1:

    输入: [1,4], 2
    输出: 4
    原因: 在第 1 秒开始时,提莫开始对艾希进行攻击并使其立即中毒。中毒状态会维持 2 秒钟,直到第 2 秒钟结束。
    在第 4 秒开始时,提莫再次攻击艾希,使得艾希获得另外 2 秒的中毒时间。
    所以最终输出 4 秒。
    

    示例2:

    输入: [1,2], 2
    输出: 3
    原因: 在第 1 秒开始时,提莫开始对艾希进行攻击并使其立即中毒。中毒状态会维持 2 秒钟,直到第 2 秒钟结束。
    但是在第 2 秒开始时,提莫再次攻击了已经处于中毒状态的艾希。
    由于中毒状态不可叠加,提莫在第 2 秒开始时的这次攻击会在第 3 秒钟结束。
    所以最终输出 3。
    

    注意:

    1. 你可以假定时间序列数组的总长度不超过 10000。
    2. 你可以假定提莫攻击时间序列中的数字和提莫攻击的中毒持续时间都是非负整数,并且不超过 10,000,000。

    64ms

     1 class Solution {
     2     func findPoisonedDuration(_ timeSeries: [Int], _ duration: Int) -> Int {
     3         let count = timeSeries.count
     4         guard count > 0 else {
     5             return 0
     6         }
     7         
     8         var left = timeSeries[0]
     9         var right = timeSeries[0]
    10         var total = 0
    11         
    12         for index in 1..<count {
    13             if right + duration < timeSeries[index] {
    14                 total += right - left + duration
    15                 left = timeSeries[index]
    16             }
    17             right = timeSeries[index]
    18         }
    19         total += right - left + duration
    20     
    21         return total
    22     }
    23 }

    388ms

     1 class Solution {
     2     func findPoisonedDuration(_ timeSeries: [Int], _ duration: Int) -> Int {
     3         guard timeSeries.count > 0 else { return 0 }
     4         var totalDuration = duration
     5         for index in 1..<timeSeries.count {
     6             var lastMax = timeSeries[index - 1] + duration - 1
     7             if lastMax < timeSeries[index] {
     8                 totalDuration += duration
     9             } else {
    10                 let currMax = timeSeries[index] + duration - 1
    11                 totalDuration += (currMax - lastMax)
    12             }
    13         }
    14         return totalDuration
    15     }
    16 }

    392ms

     1 class Solution {
     2     func findPoisonedDuration(_ timeSeries: [Int], _ duration: Int) -> Int {
     3         if timeSeries.isEmpty {return 0}
     4         var res:Int = 0
     5         var n:Int = timeSeries.count
     6         for i in 1..<n
     7         {
     8             var diff:Int = timeSeries[i] - timeSeries[i - 1]
     9             res += (diff < duration) ? diff : duration
    10         }
    11         return res + duration
    12     }
    13 }

    392ms

     1 class Solution {
     2     func findPoisonedDuration(_ timeSeries: [Int], _ duration: Int) -> Int {
     3         if timeSeries.isEmpty {return 0}
     4         var res:Int = 0
     5         var n:Int = timeSeries.count
     6         for i in 1..<n
     7         {
     8             var diff:Int = timeSeries[i] - timeSeries[i - 1]
     9             res += (diff < duration) ? diff : duration
    10         }
    11         return res + duration
    12     }
    13 }

    396ms

     1 class Solution {
     2 func findPoisonedDuration(_ timeSeries: [Int], _ duration: Int) -> Int {
     3     if timeSeries.count == 0 {
     4         return 0
     5     }
     6     if timeSeries.count == 1 {
     7         return duration
     8     }
     9     
    10     var result = 0
    11     
    12     for i in 0..<timeSeries.count-1 {
    13         if timeSeries[i] + duration <= timeSeries[i + 1] {
    14             result += duration
    15         }
    16         else {
    17             result += (timeSeries[i + 1] - timeSeries[i])
    18         }
    19     }
    20     
    21     result += duration
    22     
    23     return result
    24   }
    25 }

    440ms

     1 class Solution {
     2     func findPoisonedDuration(_ timeSeries: [Int], _ duration: Int) -> Int {
     3         var res = 0, start = -1, end = -1
     4         for t in timeSeries.sorted() {
     5             if t > end {
     6                 res += end - start
     7                 start = t
     8             }
     9             end = t + duration
    10         }
    11         return res + end - start
    12     }
    13 }
  • 相关阅读:
    jq中的ajax
    浅谈ajax的优点与缺点
    jq模拟操作
    Spring注解使用和与配置文件的关系
    Spring中@Autowired注解、@Resource注解的区别
    分页技术
    动态的把固定格式的json数据以菜单形式插入
    web.xml文件中context-param、listener、filter、servlet的执行顺序
    spring MVC controller中的方法跳转到另外controller中的某个method的方法
    spring mvc后台如何处理ajax的请求,并返回json
  • 原文地址:https://www.cnblogs.com/strengthen/p/10370594.html
Copyright © 2020-2023  润新知