• Jungle Roads(kruskar)


    Jungle Roads
    Time Limit: 1000MS   Memory Limit: 10000K
    Total Submissions: 22633   Accepted: 10544

    Description


    The Head Elder of the tropical island of Lagrishan has a problem. A burst of foreign aid money was spent on extra roads between villages some years ago. But the jungle overtakes roads relentlessly, so the large road network is too expensive to maintain. The Council of Elders must choose to stop maintaining some roads. The map above on the left shows all the roads in use now and the cost in aacms per month to maintain them. Of course there needs to be some way to get between all the villages on maintained roads, even if the route is not as short as before. The Chief Elder would like to tell the Council of Elders what would be the smallest amount they could spend in aacms per month to maintain roads that would connect all the villages. The villages are labeled A through I in the maps above. The map on the right shows the roads that could be maintained most cheaply, for 216 aacms per month. Your task is to write a program that will solve such problems. 

    Input

    The input consists of one to 100 data sets, followed by a final line containing only 0. Each data set starts with a line containing only a number n, which is the number of villages, 1 < n < 27, and the villages are labeled with the first n letters of the alphabet, capitalized. Each data set is completed with n-1 lines that start with village labels in alphabetical order. There is no line for the last village. Each line for a village starts with the village label followed by a number, k, of roads from this village to villages with labels later in the alphabet. If k is greater than 0, the line continues with data for each of the k roads. The data for each road is the village label for the other end of the road followed by the monthly maintenance cost in aacms for the road. Maintenance costs will be positive integers less than 100. All data fields in the row are separated by single blanks. The road network will always allow travel between all the villages. The network will never have more than 75 roads. No village will have more than 15 roads going to other villages (before or after in the alphabet). In the sample input below, the first data set goes with the map above. 

    Output

    The output is one integer per line for each data set: the minimum cost in aacms per month to maintain a road system that connect all the villages. Caution: A brute force solution that examines every possible set of roads will not finish within the one minute time limit. 

    Sample Input

    9
    A 2 B 12 I 25
    B 3 C 10 H 40 I 8
    C 2 D 18 G 55
    D 1 E 44
    E 2 F 60 G 38
    F 0
    G 1 H 35
    H 1 I 35
    3
    A 2 B 10 C 40
    B 1 C 20
    0

    Sample Output

    216
    30
    题解:本来是个水题,结果wa了无数次,最后发现是因为数据有不合法,所以这里吸取一个教训,当输入数据量特别小并且输入字符的时候很容易出现不合法数据,所以这时候最好不要用scanf要用cin更加安全
    ac代码;
     1 #include<cstdio>
     2 #include<cstring>
     3 #include<iostream>
     4 #include<algorithm>
     5 using namespace std;
     6 const int N = 100;
     7 
     8 struct Edge{
     9     int from;
    10     int to;
    11     int w;
    12     bool operator <(const Edge &a) const {
    13         return w<a.w;
    14     }
    15 }edge[12000];
    16 int fa[N];
    17 int Gf(int x){return (fa[x]==x)?x:fa[x] = Gf(fa[x]);}
    18 
    19 int cnt;
    20 int n;
    21 int solve()
    22 {
    23     int sum = 0;
    24     for(int i = 0; i <= N; i++){
    25         fa[i] = i;
    26     }
    27     int tm = 0;
    28     for(int i = 0; i< cnt; i++){
    29         int X = Gf(edge[i].from);
    30         int Y = Gf(edge[i].to);
    31         if(X!=Y){
    32             sum+=edge[i].w;
    33             tm++;
    34             fa[Y] = X;
    35             if(tm==n-1) return sum;
    36         }
    37     }
    38 }
    39 int main()
    40 {
    41     //freopen("in.txt", "r", stdin);
    42     //freopen("out.txt", "w", stdout);
    43 
    44 
    45     //while(~scanf("%d", &n))
    46     while(cin >> n, n)
    47     {
    48         if(n==0) return 0;
    49         cnt = 0;
    50         for(int o = 0; o < n-1; o++){
    51             //getchar();
    52             char from,to;
    53             //scanf("%c",&from);
    54             cin >> from;
    55             //printf("from = %c
    ",from);
    56             int x;
    57             //scanf("%d",&x);
    58             cin >> x;
    59 
    60             for(int i = 0; i< x; i++)
    61             {
    62                 //getchar();
    63                 int w;
    64                 //scanf("%c %d",&to,&w);
    65                 cin >> to >> w;
    66                 //printf("to = %c
    ",to);
    67                 edge[cnt].from = from-'A';
    68                 edge[cnt].to = to-'A';
    69                 edge[cnt++].w = w;
    70             }
    71         }
    72         sort(edge,edge+cnt);
    73         int ans = solve();
    74         //printf("%d
    ",ans);
    75         cout << ans << endl;
    76     }
    77   return 0;
    78 }
  • 相关阅读:
    [转]MySql 5.7关键字和保留字-附表
    [转]超链接标签简单的几个样式属性
    layui table 前台数字格式保留两位小数,不足补0(mysql 数据库)
    [转]Object.keys()和for in的排序问题
    [转]对form:input标签中的数字进行格式化
    [转]bootstrap table 动态列数
    [转]bootstrap的table插件动态加载表头
    [转]【MyBatis】Decimal映射到实体类出现科学计数法问题
    [转]MySQL函数大全 及用法示例
    [转]mysql update case when和where之间的注意事项
  • 原文地址:https://www.cnblogs.com/shanyr/p/5215360.html
Copyright © 2020-2023  润新知