mongodb副本集添加节点

1.  准备工作

有一套mongodb 副本集的集群，部署方式参考 mongodb 4.0副本集搭建

准备一个新节点，使用和原副本集版本一致的mongodb

拷贝原副本集中的配置文件、keyfile文件，并注意修改keyfile文件的权限（600）

节点	角色
192.168.56.199:27017	PRIMARY
192.168.56.198:27018	SECONDARY
192.168.56.199:27018	ARBITER

准备加入的新节点： 192.168.56.197:27017

2.  添加节点

2.1 启动新节点

例如，原节点的版本是4.2.8，新节点版本一致，路径一致，然后启动新节点

/usr/local/mongodb/bin/mongod -f /data/mongodb/27017/etc/mongodb.conf

2.2 主库上查看当前节点及配置信息

使用rs.config()查看配置信息

test12:PRIMARY> rs.config()
{
  "_id" : "test12",
  "version" : 1,
  "protocolVersion" : NumberLong(1),
  "writeConcernMajorityJournalDefault" : true,
  "members" : [
    {
      "_id" : 0,
      "host" : "192.168.56.198:27017",
      "arbiterOnly" : false,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 1,
      "tags" : {

      },
      "slaveDelay" : NumberLong(0),
      "votes" : 1
    },
    {
      "_id" : 1,
      "host" : "192.168.56.199:27017",
      "arbiterOnly" : false,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 1,
      "tags" : {

      },
      "slaveDelay" : NumberLong(0),
      "votes" : 1
    },
    {
      "_id" : 2,
      "host" : "192.168.56.199:27018",
      "arbiterOnly" : true,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 0,
      "tags" : {

      },
      "slaveDelay" : NumberLong(0),
      "votes" : 1
    }
  ],
  "settings" : {
    "chainingAllowed" : true,
    "heartbeatIntervalMillis" : 2000,
    "heartbeatTimeoutSecs" : 10,
    "electionTimeoutMillis" : 10000,
    "catchUpTimeoutMillis" : -1,
    "catchUpTakeoverDelayMillis" : 30000,
    "getLastErrorModes" : {

    },
    "getLastErrorDefaults" : {
      "w" : 1,
      "wtimeout" : 0
    },
    "replicaSetId" : ObjectId("61b86af0a21015e69623e18d")
  }
}

rs.status() 查看状态信息

test12:PRIMARY> rs.status()
{
  "set" : "test12",
  "date" : ISODate("2021-12-14T10:07:46.561Z"),
  "myState" : 1,
  "term" : NumberLong(1),
  "syncingTo" : "",
  "syncSourceHost" : "",
  "syncSourceId" : -1,
  "heartbeatIntervalMillis" : NumberLong(2000),
  "majorityVoteCount" : 2,
  "writeMajorityCount" : 2,
  "optimes" : {
    "lastCommittedOpTime" : {
      "ts" : Timestamp(1639476462, 1),
      "t" : NumberLong(1)
    },
    "lastCommittedWallTime" : ISODate("2021-12-14T10:07:42.560Z"),
    "readConcernMajorityOpTime" : {
      "ts" : Timestamp(1639476462, 1),
      "t" : NumberLong(1)
    },
    "readConcernMajorityWallTime" : ISODate("2021-12-14T10:07:42.560Z"),
    "appliedOpTime" : {
      "ts" : Timestamp(1639476462, 1),
      "t" : NumberLong(1)
    },
    "durableOpTime" : {
      "ts" : Timestamp(1639476462, 1),
      "t" : NumberLong(1)
    },
    "lastAppliedWallTime" : ISODate("2021-12-14T10:07:42.560Z"),
    "lastDurableWallTime" : ISODate("2021-12-14T10:07:42.560Z")
  },
  "lastStableRecoveryTimestamp" : Timestamp(1639476442, 1),
  "lastStableCheckpointTimestamp" : Timestamp(1639476442, 1),
  "electionCandidateMetrics" : {
    "lastElectionReason" : "electionTimeout",
    "lastElectionDate" : ISODate("2021-12-14T09:59:22.407Z"),
    "electionTerm" : NumberLong(1),
    "lastCommittedOpTimeAtElection" : {
      "ts" : Timestamp(0, 0),
      "t" : NumberLong(-1)
    },
    "lastSeenOpTimeAtElection" : {
      "ts" : Timestamp(1639475952, 1),
      "t" : NumberLong(-1)
    },
    "numVotesNeeded" : 2,
    "priorityAtElection" : 1,
    "electionTimeoutMillis" : NumberLong(10000),
    "numCatchUpOps" : NumberLong(0),
    "newTermStartDate" : ISODate("2021-12-14T09:59:22.431Z"),
    "wMajorityWriteAvailabilityDate" : ISODate("2021-12-14T09:59:23.493Z")
  },
  "members" : [
    {
      "_id" : 0,
      "name" : "192.168.56.198:27017",
      "health" : 1,
      "state" : 2,
      "stateStr" : "SECONDARY",
      "uptime" : 514,
      "optime" : {
        "ts" : Timestamp(1639476462, 1),
        "t" : NumberLong(1)
      },
      "optimeDurable" : {
        "ts" : Timestamp(1639476462, 1),
        "t" : NumberLong(1)
      },
      "optimeDate" : ISODate("2021-12-14T10:07:42Z"),
      "optimeDurableDate" : ISODate("2021-12-14T10:07:42Z"),
      "lastHeartbeat" : ISODate("2021-12-14T10:07:45.153Z"),
      "lastHeartbeatRecv" : ISODate("2021-12-14T10:07:46.542Z"),
      "pingMs" : NumberLong(1),
      "lastHeartbeatMessage" : "",
      "syncingTo" : "192.168.56.199:27017",
      "syncSourceHost" : "192.168.56.199:27017",
      "syncSourceId" : 1,
      "infoMessage" : "",
      "configVersion" : 1
    },
    {
      "_id" : 1,
      "name" : "192.168.56.199:27017",
      "health" : 1,
      "state" : 1,
      "stateStr" : "PRIMARY",
      "uptime" : 1001,
      "optime" : {
        "ts" : Timestamp(1639476462, 1),
        "t" : NumberLong(1)
      },
      "optimeDate" : ISODate("2021-12-14T10:07:42Z"),
      "syncingTo" : "",
      "syncSourceHost" : "",
      "syncSourceId" : -1,
      "infoMessage" : "",
      "electionTime" : Timestamp(1639475962, 1),
      "electionDate" : ISODate("2021-12-14T09:59:22Z"),
      "configVersion" : 1,
      "self" : true,
      "lastHeartbeatMessage" : ""
    },
    {
      "_id" : 2,
      "name" : "192.168.56.199:27018",
      "health" : 1,
      "state" : 7,
      "stateStr" : "ARBITER",
      "uptime" : 514,
      "lastHeartbeat" : ISODate("2021-12-14T10:07:44.896Z"),
      "lastHeartbeatRecv" : ISODate("2021-12-14T10:07:44.896Z"),
      "pingMs" : NumberLong(0),
      "lastHeartbeatMessage" : "",
      "syncingTo" : "",
      "syncSourceHost" : "",
      "syncSourceId" : -1,
      "infoMessage" : "",
      "configVersion" : 1
    }
  ],
  "ok" : 1,
  "$clusterTime" : {
    "clusterTime" : Timestamp(1639476462, 1),
    "signature" : {
      "hash" : BinData(0,"AAAAAAAAAAAAAAAAAAAAAAAAAAA="),
      "keyId" : NumberLong(0)
    }
  },
  "operationTime" : Timestamp(1639476462, 1)
}

2.3  将新节点添加至集群

在主库上执行rs.add()将新节点添加进集群中

生产环境添加节点时，建议将priority及votes设为0,即不会选为主（priority默认1），也没有投票特性（votes默认1，有投票权）

test12:PRIMARY> rs.add( { host: "192.168.56.197:27017", priority: 0, votes: 0 } )
{
  "ok" : 1,
  "$clusterTime" : {
    "clusterTime" : Timestamp(1639476997, 1),
    "signature" : {
      "hash" : BinData(0,"AAAAAAAAAAAAAAAAAAAAAAAAAAA="),
      "keyId" : NumberLong(0)
    }
  },
  "operationTime" : Timestamp(1639476997, 1)
}

另外，生产环境是从主库拉取全量数据，如果数据量较大，则需要观察主库的压力及对线上业务的影响。

同步数据的过程中，新节点的状态stateStr 为STARTUP2，待同步完成后会变为SECONDARY。

2.4  重置新节点的属性

此时再用rs.config()查看新节点状态，priority及votes是之前设的0，可以使用 rs.recofig()命令进行调整

test12:PRIMARY> rs.config()
{
  "_id" : "test12",
  "version" : 2,
  "protocolVersion" : NumberLong(1),
  "writeConcernMajorityJournalDefault" : true,
  "members" : [
    {
      "_id" : 0,
      "host" : "192.168.56.198:27017",
      "arbiterOnly" : false,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 1,
      "tags" : {
        
      },
      "slaveDelay" : NumberLong(0),
      "votes" : 1
    },
    {
      "_id" : 1,
      "host" : "192.168.56.199:27017",
      "arbiterOnly" : false,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 1,
      "tags" : {
        
      },
      "slaveDelay" : NumberLong(0),
      "votes" : 1
    },
    {
      "_id" : 2,
      "host" : "192.168.56.199:27018",
      "arbiterOnly" : true,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 0,
      "tags" : {
        
      },
      "slaveDelay" : NumberLong(0),
      "votes" : 1
    },
    {
      "_id" : 3,
      "host" : "192.168.56.197:27017",
      "arbiterOnly" : false,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 0,
      "tags" : {
        
      },
      "slaveDelay" : NumberLong(0),
      "votes" : 0
    }
  ],
  "settings" : {
    "chainingAllowed" : true,
    "heartbeatIntervalMillis" : 2000,
    "heartbeatTimeoutSecs" : 10,
    "electionTimeoutMillis" : 10000,
    "catchUpTimeoutMillis" : -1,
    "catchUpTakeoverDelayMillis" : 30000,
    "getLastErrorModes" : {
      
    },
    "getLastErrorDefaults" : {
      "w" : 1,
      "wtimeout" : 0
    },
    "replicaSetId" : ObjectId("61b86af0a21015e69623e18d")
  }
}

从上面可以看到新节点的id为3 ，则可以通过如下命令调整对应的属性

var cfg = rs.conf()
cfg.members[3].priority = 1
cfg.members[3].votes = 1
rs.reconfig(cfg)

调整后再查看，属性已调整

test12:PRIMARY> rs.config()
{
  "_id" : "test12",
  "version" : 3,
  "protocolVersion" : NumberLong(1),
  "writeConcernMajorityJournalDefault" : true,
  "members" : [
    {
      "_id" : 0,
      "host" : "192.168.56.198:27017",
      "arbiterOnly" : false,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 1,
      "tags" : {
        
      },
      "slaveDelay" : NumberLong(0),
      "votes" : 1
    },
    {
      "_id" : 1,
      "host" : "192.168.56.199:27017",
      "arbiterOnly" : false,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 1,
      "tags" : {
        
      },
      "slaveDelay" : NumberLong(0),
      "votes" : 1
    },
    {
      "_id" : 2,
      "host" : "192.168.56.199:27018",
      "arbiterOnly" : true,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 0,
      "tags" : {
        
      },
      "slaveDelay" : NumberLong(0),
      "votes" : 1
    },
    {
      "_id" : 3,
      "host" : "192.168.56.197:27017",
      "arbiterOnly" : false,
      "buildIndexes" : true,
      "hidden" : false,
      "priority" : 1,
      "tags" : {
        
      },
      "slaveDelay" : NumberLong(0),
      "votes" : 1
    }
  ],
  "settings" : {
    "chainingAllowed" : true,
    "heartbeatIntervalMillis" : 2000,
    "heartbeatTimeoutSecs" : 10,
    "electionTimeoutMillis" : 10000,
    "catchUpTimeoutMillis" : -1,
    "catchUpTakeoverDelayMillis" : 30000,
    "getLastErrorModes" : {
      
    },
    "getLastErrorDefaults" : {
      "w" : 1,
      "wtimeout" : 0
    },
    "replicaSetId" : ObjectId("61b86af0a21015e69623e18d")
  }
}

至此，新节点便加入了副本集中

 

3. 注意点总结

• 一个副本集，最多可以拥有50个secondary，最多可以有7个投票成员，在副本集里面添加一个新成员，如果之前副本集已经有了7个成员，那么可以设置成非投票成员，或者你从移除之前一个投票成员出来

• 新节点的版本、配置建议与原集群一致

• 注意添加新节点前确定网络互通

• 如果集群数据量较大，则选择业务低峰期添加节点，并观察压力情况

• 新节点加入时建议将priority及votes设为0

   
  come from : https://www.cnblogs.com/gjc592/p/15687657.html