安装Docker
参考：https://www.cnblogs.com/rdchenxi/p/10381631.html
加速器配置
参考：https://www.cnblogs.com/rdchenxi/p/10399885.html
网络介绍k8s（CNI网络模型）
Flannel网络
overlay
覆盖网络就是应用层网络，它是面向应用层的，不考虑或很少考虑网络层，物理层的问题。
详细说来，覆盖网络是指建立在另一个网络上的网络。该网络中的结点可以看作通过虚拟或逻辑链路而连接起来的。虽然在底层有很多条物理链路，但是这些虚拟或逻辑链路都与路径一一对应。例如：许多P2P网络就是覆盖网络，因为它运行在互连网的上层。覆盖网络允许对没有IP地址标识的目的主机路由信息，例如：Freenet 和DHT（分布式哈希表）可以路由信息到一个存储特定文件的结点，而这个结点的IP地址事先并不知道。
覆盖网络被认为是一条用来改善互连网路由的途径，让二层网络在三层网络中传递，既解决了二层的缺点，又解决了三层的不灵活！
FIannel
Flannel实质上是一种“覆盖网络(overlay network)”，也就是将TCP数据包装在另一种网络包里面进行路由转发和通信，目前已经支持UDP、VxLAN、AWS VPC和GCE路由等数据转发方式。
默认的节点间数据通信方式是UDP转发。
安装Flannel
分配子网段写入edcd里
[root@mast-1 k8s]# /opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.10.11:2379,ht
tps://192.168.10.12:2379,https://192.168.10.13:2379" set /coreos.com/network/config '{ "Network": "172.17.0.0/16", "Backend": {"Type": "vxlan"}}'
{ "Network": "172.17.0.0/16", "Backend": {"Type": "vxlan"}}
[root@mast-1 k8s]#
查看数据
[root@mast-1 k8s]# /opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.10.11:2379,ht
tps:////192.168.10.12:2379,https://192.168.10.13:2379" get /coreos.com/network/config { "Network": "172.17.0.0/16", "Backend": {"Type": "vxlan"}}
下载安装Flannel
[root@node-1 ~]# wget https://github.com/coreos/flannel/releases/download/v0.10.0/flannel-v0.10.0-linux-amd64.tar.gz --2019-04-20 09:38:45-- https://github.com/coreos/flannel/releases/download/v0.10.0/flannel-v0.10.0-linux-amd64.tar.gz 正在解析主机 github.com (github.com)... 13.250.177.223, 52.74.223.119, 13.229.188.59 正在连接 github.com (github.com)|13.250.177.223|:443... 已连接。 已发出 HTTP 请求，正在等待回应... 302 Found 位置：https://github-production-release-asset-2e65be.s3.amazonaws.com/21704134/596e76e2-002c-11e8-9359-36689058e7af?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20 190420%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190420T013853Z&X-Amz-Expires=300&X-Amz-Signature=9c7a12bd05f366c722480fd53b3968d2a3b6ed6f690baab3a24ef7b1955e2d11&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dflannel-v0.10.0-linux-amd64.tar.gz&response-content-type=application%2Foctet-stream [跟随至新的 URL]--2019-04-20 09:38:53-- https://github-production-release-asset-2e65be.s3.amazonaws.com/21704134/596e76e2-002c-11e8-9359-36689058e7af?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIW NJYAX4CSVEH53A%2F20190420%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190420T013853Z&X-Amz-Expires=300&X-Amz-Signature=9c7a12bd05f366c722480fd53b3968d2a3b6ed6f690baab3a24ef7b1955e2d11&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dflannel-v0.10.0-linux-amd64.tar.gz&response-content-type=application%2Foctet-stream正在解析主机 github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.139.211 正在连接 github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.139.211|:443... 已连接。 已发出 HTTP 请求，正在等待回应... 200 OK 长度：9706487 (9.3M) [application/octet-stream] 正在保存至: “flannel-v0.10.0-linux-amd64.tar.gz” 100%[=====================================================================================================================================================>] 9,706,487 15.6KB/s 用时 7m 23s 2019-04-20 09:46:19 (21.4 KB/s) - 已保存 “flannel-v0.10.0-linux-amd64.tar.gz” [9706487/9706487])
node-1安装
[root@node-1 ~]# mkdir /opt/kubernetes/{bin,cfg} -pv
mkdir: 已创建目录 "/opt/kubernetes"
mkdir: 已创建目录 "/opt/kubernetes/bin"
mkdir: 已创建目录 "/opt/kubernetes/cfg"
[root@node-1 ~]# tar xf flannel-v0.10.0-linux-amd64.tar.gz -C /opt/kubernetes/bin/
[root@node-1 ~]# cat flannel.sh
#!/bin/bash
ETCD_ENDPOINTS=${1:-"http://127.0.0.1:2379"}
cat <<EOF >/opt/kubernetes/cfg/flanneld
FLANNEL_OPTIONS="--etcd-endpoints=${ETCD_ENDPOINTS}
-etcd-cafile=/opt/etcd/ssl/ca.pem
-etcd-certfile=/opt/etcd/ssl/server.pem
-etcd-keyfile=/opt/etcd/ssl/server-key.pem"
EOF
cat <<EOF >/usr/lib/systemd/system/flanneld.service
[Unit]
Description=Flanneld overlay address etcd agent
After=network-online.target network.target
Before=docker.service
[Service]
Type=notify
EnvironmentFile=/opt/kubernetes/cfg/flanneld
ExecStart=/opt/kubernetes/bin/flanneld --ip-masq $FLANNEL_OPTIONS
ExecStartPost=/opt/kubernetes/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/subnet.env
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF
cat <<EOF >/usr/lib/systemd/system/docker.service
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target
[Service]
Type=notify
EnvironmentFile=/run/flannel/subnet.env 读取生成的子网
ExecStart=/usr/bin/dockerd $DOCKER_NETWORK_OPTIONS
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TimeoutStartSec=0
Delegate=yes
KillMode=process
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl enable flanneld
systemctl restart flanneld
systemctl restart docker
[root@node-1 ~]# bash flannel.sh "https://192.168.10.11:2379,https://192.168.10.12:2379,https://192.168.10.13:2379"
[root@node-1 ~]# cat /opt/kubernetes/cfg/flanneld
FLANNEL_OPTIONS="--etcd-endpoints=https://192.168.10.11:2379,https://192.168.10.12:2379,https://192.168.10.13:2379 -etcd-cafile=/opt/etcd/ssl/ca.pem -etcd-certfile=/opt/etcd/ssl/server.pem -e
tcd-keyfile=/opt/etcd/ssl/server-key.pem"
[root@node-1 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:0c:29:f7:91:47 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.13/24 brd 192.168.10.255 scope global noprefixroute ens33
valid_lft forever preferred_lft forever
inet6 fe80::6017:43d:a11c:2a9f/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:19:5d:ee:63 brd ff:ff:ff:ff:ff:ff
inet 172.17.8.1/24 brd 172.17.8.255 scope global docker0
valid_lft forever preferred_lft forever
4: flannel.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN group default
link/ether 56:2f:96:00:5c:05 brd ff:ff:ff:ff:ff:ff
inet 172.17.8.0/32 scope global flannel.1
valid_lft forever preferred_lft forever
inet6 fe80::542f:96ff:fe00:5c05/64 scope link
valid_lft forever preferred_lft forever
node-2安装
[root@node-1 ~]# scp -r /usr/lib/systemd/system/docker.service 192.168.10.14:/usr/lib/systemd/system root@192.168.10.14's password: docker.service 100% 526 236.7KB/s 00:00 [root@node-1 ~]# scp -r /usr/lib/systemd/system/flanneld.service 192.168.10.14:/usr/lib/systemd/system root@192.168.10.14's password: flanneld.service 100% 417 178.3KB/s 00:00 [root@node-1 ~]# scp -r /opt/kubernetes 192.168.10.14:/opt/ root@192.168.10.14's password: Permission denied, please try again. root@192.168.10.14's password: flanneld 100% 35MB 11.5MB/s 00:03 mk-docker-opts.sh 100% 2139 40.6KB/s 00:00 README.md 100% 4298 109.4KB/s 00:00 flanneld 100% 235 55.1KB/s 00:00 [root@node-2 ~]# mkdir /opt/etcd node-2创建目录 [root@node-1 ~]# scp -r /opt/etcd/ssl 192.168.10.14:/opt/etcd/ root@192.168.10.14's password: ca.pem 100% 1265 70.7KB/s 00:00 server-key.pem 100% 1675 79.2KB/s 00:00 server.pem
node-2启动 100% 1338 39.5KB/s 00:00 [root@node-2 ~]# systemctl daemon-reload [root@node-2 ~]# systemctl restart flanneld [root@node-2 ~]# systemctl restart docker [root@node-2 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:e9:c2:41 brd ff:ff:ff:ff:ff:ff inet 192.168.10.14/24 brd 192.168.10.255 scope global noprefixroute ens33 valid_lft forever preferred_lft forever inet6 fe80::85fd:b3b3:c97:eca3/64 scope link noprefixroute valid_lft forever preferred_lft forever 3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default link/ether 02:42:28:a8:bb:18 brd ff:ff:ff:ff:ff:ff inet 172.17.82.1/24 scope global docker0 valid_lft forever preferred_lft forever 4: flannel.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN group default link/ether 42:02:5f:e8:9d:d8 brd ff:ff:ff:ff:ff:ff inet 172.17.82.0/32 scope global flannel.1 valid_lft forever preferred_lft forever inet6 fe80::4002:5fff:fee8:9dd8/64 scope link valid_lft forever preferred_lft forever
添加路由，容器互通；注意正常应该是Flannel自己添加路由的，可能因为我没装route工具原因吧
[root@node-1 ~]# route add -net 172.17.82.0/24 gw 192.168.10.14 node-1添加的路由
[root@node-2 ~]# route add -net 172.17.8.0/24 gw 192.168.10.13 node-2 路由
[root@node-1 ~]# docker run -it busybox sh
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
5: eth0@if6: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1450 qdisc noqueue
link/ether 02:42:ac:11:08:02 brd ff:ff:ff:ff:ff:ff
inet 172.17.8.2/24 brd 172.17.8.255 scope global eth0
valid_lft forever preferred_lft forever
node-2容器
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
15: eth0@if16: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue
link/ether 02:42:ac:11:52:02 brd ff:ff:ff:ff:ff:ff
inet 172.17.82.2/24 brd 172.17.82.255 scope global eth0
valid/ # ping 172.17.8.2
PING 172.17.8.2 (172.17.8.2): 56 data bytes
64 bytes from 172.17.8.2: seq=3283 ttl=62 time=0.944 ms
64 bytes from 172.17.8.2: seq=3284 ttl=62 time=0.950 ms
64 bytes from 172.17.8.2: seq=3285 ttl=62 time=0.712 ms
查看生产网络配置
[root@node-1 ~]# /opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.10.11:2379,https://192.168.10.12:2379,https://192.168.10.13:2379" ls /coreos.com/network
/coreos.com/network/config /coreos.com/network/subnets [root@node-1 ~]# /opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.10.11:2379,https://192.168.10.12:2379,https://192.168.10.13:2379" ls /coreos.com/network/subnets
/coreos.com/network/subnets/172.17.8.0-24 /coreos.com/network/subnets/172.17.82.0-24
查看etcd里网络设置
[root@node-1 ~]# /opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.10.11:2379,https://192.168.10.12:2379,https://192.168.10.13:2379" get /coreos.com/network/subnets/172.17.8.0-24
{"PublicIP":"192.168.10.13","BackendType":"vxlan","BackendData"： {"VtepMAC":"56:2f:96:00:5c:05"}} [root@node-1 ~]# /opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.10.11:2379,https://192.168.10.12:2379,https://192.168.10.13:2379" get /coreos.com/network/subnets/172.17.82.0-24
{"PublicIP":"192.168.10.14","BackendType":"vxlan","BackendData":{"VtepMAC":"42:02:5f:e8:9d:d8"}}