A DBF file consists of a header record and data records. The header record defines the structure of the table and contains any other information related to the table. The header record starts at file position zero. Data records follow the header, in consecutive bytes, and contain the actual text of the fields.
Note The data in the data file starts at the position indicated in bytes 8 to 9 of the header record. Data records begin with a delete flag byte. If this byte is an ASCII space (0x20), the record is not deleted. If the first byte is an asterisk (0x2A), the record is deleted. The data from the fields named in the field subrecords follows the delete flag.
The length of a record, in bytes, is determined by summing the defined lengths of all fields. Integers in table files are stored with the least significant byte first.
DBF File Header
Byte offset | Description |
0 | File type: 0x02 FoxBASE 0x03 FoxBASE+/Dbase III plus, no memo 0x30 Visual FoxPro 0x31 Visual FoxPro, autoincrement enabled 0x43 dBASE IV SQL table files, no memo 0x63 dBASE IV SQL system files, no memo 0x83 FoxBASE+/dBASE III PLUS, with memo 0x8B dBASE IV with memo 0xCB dBASE IV SQL table files, with memo 0xF5 FoxPro 2.x (or earlier) with memo 0xFB FoxBASE |
1 - 3 | Last update (YYMMDD) |
4 – 7 | Number of records in file |
8 – 9 | Position of first data record |
10 – 11 | Length of one data record, including delete flag |
12 – 27 | Reserved |
28 | Table flags: 0x01 file has a structural .cdx 0x02 file has a Memo field 0x04 file is a database (.dbc) This byte can contain the sum of any of the above values. For example, the value 0x03 indicates the table has a structural .cdx and a Memo field. |
29 | Code page mark |
30 – 31 | Reserved, contains 0x00 |
32 – n | Field subrecords The number of fields determines the number of field subrecords. One field subrecord exists for each field in the table. |
n+1 | Header record terminator (0x0D) |
n+2 to n+264 | A 263-byte range that contains the backlink, which is the relative path of an associated database (.dbc) file, information. If the first byte is 0x00, the file is not associated with a database. Therefore, database files always contain 0x00. |
Field Subrecords Structure
Byte offset | Description |
0 – 10 | Field name with a maximum of 10 characters. If less than 10, it is padded with null characters (0x00). |
11 | Field type: C – Character Y – Currency N – Numeric F – Float D – Date T – DateTime B – Double I – Integer L – Logical M – Memo G – General C – Character (binary) M – Memo (binary) P – Picture |
12 – 15 | Displacement of field in record |
16 | Length of field (in bytes) |
17 | Number of decimal places |
18 | Field flags: 0x01 System Column (not visible to user) 0x02 Column can store null values 0x04 Binary column (for CHAR and MEMO only) 0x06 (0x02+0x04) When a field is NULL and binary (Integer, Currency, and Character/Memo fields) 0x0C Column is autoincrementing |
19 - 22 | Value of autoincrement Next value |
23 | Value of autoincrement Step value |
24 – 31 | Reserved |
typedef struct
{
FILE *fp;
int nRecords;
int nRecordLength;
int nHeaderLength;
int nFields;
int *panFieldOffset;
int *panFieldSize;
int *panFieldDecimals;
char *pachFieldType;
char *pszHeader;
int nCurrentRecord;
int bCurrentRecordModified;
char *pszCurrentRecord;
int bNoHeader;
int bUpdated;
} DBFInfo;
-----------------------------------------------------------------------------------------------------------
DBF文件结构分为两大部分:文件结构说明区和数据区。
一、文件结构说明区包括数据库参数区和记录结构表区。数据库参数区占32个字节:
1字节 数据库开始标志(若数据库含DBT文件为80H,否则为03H)
2-4字节 文件建立或修改的日期(YYMMDD 其中YY=日期-1900)
5-8字节 数据库的记录记录数,低字节在前,高字节在后
9-10字节 文件结构说明区长度
11-12字节 每条记录的总长度
12-32字节 保留
记录结构表区包括各字段参数,每个字段占32字节:
1-11字节 字段名
12 字段类型
13-14 首记录中该字段对应内存地址的偏移量
15-16 首记录中该字段对应内存地址的段地址
17 字段长度
18 字段小数位数
在所有记录结构表区后是数据库结构结束标志,其中 Foxbase 以0D结束,dBASE 以0D,00
结束。
二、数据库数据区每条记录按字段依次存放,没有分隔符,也没有终止符,每条记录以删除标志
20H开始,若该记录被删除,则该标志为2AH 即“*”。
数据库的最后一个字节为结束标志1AH。