• CentOS7-安装LAMP环境步揍


     

    参考地址:https://www.unixmen.com/install-lamp-server-apache-mariadb-php-centosrhelscientific-linux-7/

    Install Apache

    Apache is an open-source multi-platform web server. It provides a full range of web server features including CGI, SSL and virtual domains.

    The following commands should be run with root user privileges.

    To install Apache, enter the following command in your terminal:

    yum install httpd -y

    Start the Apache service and make it to start automatically on every reboot:

    systemctl start httpd
    systemctl enable httpd

    If you’re behind firewall or router, allow Apache server through your firewall/router in case you want to access it from the remote systems. To do that, enter the following commands from your Terminal:

    firewall-cmd --permanent --add-service=http
    systemctl restart firewalld

    Test Apache

    Open your web browser and navigate to http://localhost/ or http://server-ip-address/.

    Apache HTTP Server Test Page powered by CentOS - Mozilla Firefox_001

    Install MariaDB

    MariaDB is a drop in replacement for MySQL. It is a robust, scalable and reliable SQL server that comes rich set of enhancements.

    Now, start installing MariaDB as shown below:

    yum install mariadb-server mariadb -y

    Start MariaDB service and let it to start automatically on every reboot:

    systemctl start mariadb
    systemctl enable mariadb
    

    Set MySQL root password

    By default, MySQL root password is empty. So, to prevent unauthorized access to MySQL, let us set root user password. Enter the following command to setup mysql root user password:

    mysql_secure_installation
    /usr/bin/mysql_secure_installation: line 379: find_mysql_client: command not found
    
    NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
          SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!
    
    In order to log into MariaDB to secure it, we'll need the current
    password for the root user.  If you've just installed MariaDB, and
    you haven't set the root password yet, the password will be blank,
    so you should just press enter here.
    
    Enter current password for root (enter for none): 
    OK, successfully used password, moving on...
    
    Setting the root password ensures that nobody can log into the MariaDB
    root user without the proper authorisation.
    
    Set root password? [Y/n] y ## Enter Y and press Enter
    New password:   ## Enter new password
    Re-enter new password:  ## Enter password again
    Password updated successfully!
    Reloading privilege tables..
     ... Success!
    
    
    By default, a MariaDB installation has an anonymous user, allowing anyone
    to log into MariaDB without having to have a user account created for
    them.  This is intended only for testing, and to make the installation
    go a bit smoother.  You should remove them before moving into a
    production environment.
    
    Remove anonymous users? [Y/n] y  ## Enter Y and press Enter
     ... Success!
    
    Normally, root should only be allowed to connect from 'localhost'.  This
    ensures that someone cannot guess at the root password from the network.
    
    Disallow root login remotely? [Y/n] y  ## Enter Y and press Enter
     ... Success!
    
    By default, MariaDB comes with a database named 'test' that anyone can
    access.  This is also intended only for testing, and should be removed
    before moving into a production environment.
    
    Remove test database and access to it? [Y/n] y  ## Enter Y and press Enter
     - Dropping test database...
     ... Success!
     - Removing privileges on test database...
     ... Success!
    
    Reloading the privilege tables will ensure that all changes made so far
    will take effect immediately.
    
    Reload privilege tables now? [Y/n] y  ## Enter Y and press Enter
     ... Success!
    
    Cleaning up...
    
    All done!  If you've completed all of the above steps, your MariaDB
    installation should now be secure.
    
    Thanks for using MariaDB!

    Install PHP

    PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely used open-source general purpose scripting language that is especially suited for web development and can be embedded into HTML.

    Install PHP with following command:

    yum install php php-mysql php-gd php-pear -y

    Test PHP:

    Create a sample “testphp.php” file in Apache document root folder and append the lines as shown below:

    vi /var/www/html/testphp.php

    Add the following lines.

    <?php 
    phpinfo(); 
    ?>

    Restart httpd service:

    systemctl restart httpd

    Navigate to http://server-ip-address/testphp.php. It will display all the details about php such as version, build date and commands etc.

    phpinfo() - Mozilla Firefox_002

    If you want to install all php modules, enter the command yum install php* -y and restart the httpd service. To verify for the modules, open web browser and navigate to http://server-ip-address/testphp.php. You will then see all php modules.

    Install phpMyAdmin (Optional)

    phpMyAdmin is a free open-source web interface tool used to manage your MySQL databases. By default phpMyAdmin will not be not found in CentOS/RHEL/Scientific Linux official repositories. So let us install it from EPEL repository.

    To add EPEL repository, just follow the link.

    Now, install phpMyAdmin:

    yum install phpmyadmin -y

    Configure phpMyAdmin

    By default, phpMyAdmin can only be accessed from the localhost itself. To make it to accessible globally, do the following steps.

    Edit the phpmyadmin.conf file:

    vi /etc/httpd/conf.d/phpMyAdmin.conf

    Find and comment the whole /<Directory> section and add the lines as shown below:

    [...]
    Alias /phpMyAdmin /usr/share/phpMyAdmin
    Alias /phpmyadmin /usr/share/phpMyAdmin
    
    ## Comment the following Section ##
    
    #<Directory /usr/share/phpMyAdmin/>
    #   <IfModule mod_authz_core.c>
    #     # Apache 2.4
    #     <RequireAny>
    #       Require ip 127.0.0.1
    #       Require ip ::1
    #     </RequireAny>
    #   </IfModule>
    #   <IfModule !mod_authz_core.c>
    #     # Apache 2.2
    #     Order Deny,Allow
    #     Deny from All
    #     Allow from 127.0.0.1
    #     Allow from ::1
    #   </IfModule>
    #</Directory>
    
    ## Add the following lines:
    
    <Directory /usr/share/phpMyAdmin/>
            Options none
            AllowOverride Limit
            Require all granted
    </Directory>
    [...]

    Edit “config.inc.php” file and change from “cookie” to “http” to change the authentication in phpMyAdmin:

    vi /etc/phpMyAdmin/config.inc.php 
    

    Change ‘cookie’ to ‘http’.

    [...] 
    /* Authentication type */
    $cfg['Servers'][$i]['auth_type']     = 'http';    // Authentication method (config, http or cookie based)?
    [...]

    Restart the Apache service:

    systemctl restart httpd

    Now you can access the phpmyadmin console by navigating to the URL http://server-ip-address/phpmyadmin/ from your browser.

    Enter your MySQL username and password which you have given in previous steps. In my case its “root” and “centos”.

    New Tab - Mozilla Firefox_003

    You will be redirected to PhpMyAdmin main web interface.

    192.168.1.101 - localhost | phpMyAdmin 4.2.7 - Mozilla Firefox_004



  • 相关阅读:
    Git的分支的clone、提交及删除
    Linux查找整个目录下包含关键词的文件并全局替换文件内容
    解决Mysql group_concat长度限制
    SQLSERVER建立MYSQL连接服务器
    批处理创建文件夹
    表分区常用脚本
    添加别名的重要性
    floor相关
    T-SQL 小数点转换百分数
    开启MSDTC
  • 原文地址:https://www.cnblogs.com/qjtjh/p/8268999.html
Copyright © 2020-2023  润新知