Embeded linux之MMC驱动

一、注册平台设备

platform_device_register(&usr_mci_device);

二、填写平台设备结构体

static struct platform_device usr_mci_device= {

         .name          = "xxx",

         .id             = 0,

         .dev = {

                   .release     = usr_mci_platdev_release,

                   .dma_mask  = &usr_mmc_dmamask,

                   .coherent_dma_mask = DMA_BIT_MASK(32),

         },

         .num_resources    = ARRAY_SIZE(usr_mci_resources),

         .resource          = usr_mci_resources,

};

三、填写资源结构体(物理地址查芯片手册)

static struct resource usr_mci_resources[] = {

         [0] = {

                   .start          = CONFIG_USR_IOBASE,

                   .end            = CONFIG_USR_IOBASE + USR_MCI_IO_SIZE - 1,

                   .flags          = IORESOURCE_MEM,

         },

         [1] = {

                   .start          = CONFIG_USR_INTR,

                   .end            = CONFIG_USR_INTR,

                   .flags          = IORESOURCE_IRQ,

         },

};

四、注册平台驱动

platform_driver_register(&usr_mci_driver);

五、填写平台驱动结构体

static struct platform_driver usr_mci_driver= {
.probe = usr_mci_probe,
.remove = usr_mci_remove,
.suspend = usr_mci_suspend,
.resume = usr_mci_resume,
.driver = {
.name = DRIVER_NAME,
},
};

六、重写probe函数

static int __devinit usr_mci_probe(struct platform_device *pdev)

七、创建一个自己的设备结构体

struct usr_host {
struct mmc_host *mmc;
spinlock_t lock;
struct mmc_request *mrq;
struct mmc_command *cmd;
struct mmc_data *data;
void __iomem *base;
unsigned int card_status;
struct scatterlist *dma_sg;
unsigned int dma_sg_num;
unsigned int dma_alloc_size;
unsigned int dma_dir;
dma_addr_t dma_paddr;
unsigned int *dma_vaddr;
struct timer_list timer;
unsigned int irq;
unsigned int irq_status;
unsigned int is_tuning;
wait_queue_head_t intr_wait;
unsigned long pending_events;
unsigned int id;

};

struct usr_host *host;

八、分配一个包含了mmc_host的自定义结构体（core需要）

struct mmc_host *mmc;

mmc = mmc_alloc_host(sizeof(struct usr_host), &pdev->dev);

九、初始化mmc_host结构体

　　mmc->ops

　　mmc->f_min

　　mmc->f_max

　　mmc->caps

　　mmc->max_blk_count

　　mmc->max_segs

　　mmc->max_seg_size

　　mmc->max_req_size

　　mmc->ocr_avail

　　mmc->ocr

十、初始化usr_host

　　host=mmc->private;

　　host->dma_vaddr = dma_alloc_coherent(&pdev->dev, PAGE_SIZE,&host->dma_paddr, GFP_KERNEL);

　　host->mmc = mmc;

　　host->id

　　host->base

十一、初始化SDIO的时钟、驱动能力

十二、SDIO复位

十三、SDIO重上电

十四、设置时钟相位

十五、设置阈值

十六、设置中断状态

十七、设置中断屏蔽

十八、设置DMA搬移数据

十九、设置全局中断使能

二十、设置FIFO突发长度与FIFO大小

二十一、卡检测

二十二、初始化定时器，定时处理函数为卡检测

二十三、获取资源结构体的软中断号

二十四、初始化等待队列

init_waitqueue_head(&host->intr_wait);

二十五、request_irq注册中断

二十六、写中断函数（唤醒等待队列）

static irqreturn_t usr_irq(int irq, void *dev_id)

{

　　wake_up(&host->intr_wait);

}