• STM32 modbus CRC16校验


    //TxBuf[9];   //014600000001020064
    typedef unsigned char uint8_t;
    typedef unsigned short uint16_t;
    typedef int int32_t;
     
    const uint16_t polynom = 0xA001;
     
    uint16_t crc16bitbybit(uint8_t *ptr, uint16_t len)
    {
        uint8_t i;
        uint16_t crc = 0xffff;
     
        if (len == 0) {
            len = 1;
        }
        while (len--) {
            crc ^= *ptr;
            for (i = 0; i<8; i++)
            {
                if (crc & 1) {
                    crc >>= 1;
                    crc ^= polynom;
                }
                else {
                    crc >>= 1;
                }
            }
            ptr++;
        }
        return(crc);
    }
     
    /* Table of CRC values for high–order byte */
    const uint8_t crctablehi[] = {
        0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
        0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
        0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01,
        0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
        0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81,
        0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0,
        0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01,
        0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
        0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
        0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
        0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01,
        0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
        0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
        0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
        0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01,
        0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
        0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
        0x40
    };
    /* Table of CRC values for low–order byte */
    const uint8_t crctablelo[] = {
        0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06, 0x07, 0xC7, 0x05, 0xC5, 0xC4,
        0x04, 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E, 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09,
        0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9, 0x1B, 0xDB, 0xDA, 0x1A, 0x1E, 0xDE, 0xDF, 0x1F, 0xDD,
        0x1D, 0x1C, 0xDC, 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2, 0x12, 0x13, 0xD3,
        0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32, 0x36, 0xF6, 0xF7,
        0x37, 0xF5, 0x35, 0x34, 0xF4, 0x3C, 0xFC, 0xFD, 0x3D, 0xFF, 0x3F, 0x3E, 0xFE, 0xFA, 0x3A,
        0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38, 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA, 0xEE,
        0x2E, 0x2F, 0xEF, 0x2D, 0xED, 0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26,
        0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1, 0x63, 0xA3, 0xA2,
        0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4, 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F,
        0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB, 0x69, 0xA9, 0xA8, 0x68, 0x78, 0xB8, 0xB9, 0x79, 0xBB,
        0x7B, 0x7A, 0xBA, 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4, 0x74, 0x75, 0xB5,
        0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0, 0x50, 0x90, 0x91,
        0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94, 0x54, 0x9C, 0x5C,
        0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E, 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98, 0x88,
        0x48, 0x49, 0x89, 0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C,
        0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83, 0x41, 0x81, 0x80,
        0x40
    };
     
    uint16_t crc16table(uint8_t *ptr, uint16_t len)
    {
        uint8_t crchi = 0xff;
        uint8_t crclo = 0xff; 
        uint16_t index;
        while (len--) 
        {
            index = crclo ^ *ptr++; 
            crclo = crchi ^ crctablehi[index];
            crchi = crctablelo[index];
        }
        return (crchi << 8 | crclo);
    }
     
    const uint16_t crctalbeabs[]= { 
        0x0000, 0xCC01, 0xD801, 0x1400, 0xF001, 0x3C00, 0x2800, 0xE401, 
        0xA001, 0x6C00, 0x7800, 0xB401, 0x5000, 0x9C01, 0x8801, 0x4400 
    };
     
    uint16_t crc16tablefast(uint8_t *ptr, uint16_t len) 
    {
        uint16_t crc = 0xffff; 
        uint16_t i;
        uint8_t ch;
        for (i = 0; i < len; i++) {
            ch = *ptr++;
            crc = crctalbeabs[(ch ^ crc) & 15] ^ (crc >> 4);
            crc = crctalbeabs[((ch >> 4) ^ crc) & 15] ^ (crc >> 4);
        } 
        crc = ((crc & 0x00FF) << 8) | ((crc & 0xFF00) >> 8); //??????  
        return crc;
    }
     
    void modbuscrc16test()
    {
        uint8_t crc16_data[] = {0x01, 0x46, 0x00, 0x00, 0x00, 0x01, 0x02, 0x00, 0x64};
        printf("
    ");
        printf(" Modbus CRC16 tester
    ");
        printf("-----------------------------------------------------------------------
    ");
        printf(" modbus crc16table test, expected value : 0xd825, calculate value : 0x%x
    ", crc16table(crc16_data, sizeof(crc16_data)));
        printf(" modbus crc16tablefast test, expected value : 0xd825, calculate value : 0x%x
    ", crc16tablefast(crc16_data, sizeof(crc16_data)));
        printf(" modbus crc16bitbybit test, expected value : 0xd825, calculate value : 0x%x
    ", crc16bitbybit(crc16_data, sizeof(crc16_data)));
    }
  • 相关阅读:
    SQL经典语句和要点整理
    XMLHTTPRequest状态status完整列表
    console和windows子系统
    QT的文件查找
    QT的编译原理
    AES加密算法
    多线程基础
    0210. Course Schedule II (M)
    ip段/数字,如192.168.0.1/24的意思是什么?
    Excel如何让日期单元格随着某个单元格的修改而自动更新
  • 原文地址:https://www.cnblogs.com/pengwenzheng/p/10073092.html
Copyright © 2020-2023  润新知