• A1095 Cars on Campus (30 分)


    Zhejiang University has 8 campuses and a lot of gates. From each gate we can collect the in/out times and the plate numbers of the cars crossing the gate. Now with all the information available, you are supposed to tell, at any specific time point, the number of cars parking on campus, and at the end of the day find the cars that have parked for the longest time period.

    Input Specification:

    Each input file contains one test case. Each case starts with two positive integers N (≤), the number of records, and K (≤) the number of queries. Then N lines follow, each gives a record in the format:

    plate_number hh:mm:ss status
    

    where plate_number is a string of 7 English capital letters or 1-digit numbers; hh:mm:ss represents the time point in a day by hour:minute:second, with the earliest time being 00:00:00 and the latest 23:59:59; and status is either in or out.

    Note that all times will be within a single day. Each in record is paired with the chronologically next record for the same car provided it is an out record. Any in records that are not paired with an out record are ignored, as are out records not paired with an in record. It is guaranteed that at least one car is well paired in the input, and no car is both in and out at the same moment. Times are recorded using a 24-hour clock.

    Then K lines of queries follow, each gives a time point in the format hh:mm:ss. Note: the queries are given in accendingorder of the times.

    Output Specification:

    For each query, output in a line the total number of cars parking on campus. The last line of output is supposed to give the plate number of the car that has parked for the longest time period, and the corresponding time length. If such a car is not unique, then output all of their plate numbers in a line in alphabetical order, separated by a space.

    Sample Input:

    16 7
    JH007BD 18:00:01 in
    ZD00001 11:30:08 out
    DB8888A 13:00:00 out
    ZA3Q625 23:59:50 out
    ZA133CH 10:23:00 in
    ZD00001 04:09:59 in
    JH007BD 05:09:59 in
    ZA3Q625 11:42:01 out
    JH007BD 05:10:33 in
    ZA3Q625 06:30:50 in
    JH007BD 12:23:42 out
    ZA3Q625 23:55:00 in
    JH007BD 12:24:23 out
    ZA133CH 17:11:22 out
    JH007BD 18:07:01 out
    DB8888A 06:30:50 in
    05:10:00
    06:30:50
    11:00:00
    12:23:42
    14:00:00
    18:00:00
    23:59:00
    

    Sample Output:

    1
    4
    5
    2
    1
    0
    1
    JH007BD ZD00001 07:20:09

    注意点:1.查询时 now 必须放在外面不然会重复循环导致超时!!!
        2.清空cout缓存用cout<<flush;否则使用ios::sync_with_stdio(false);
    cin.tie(0)时不与printf兼容,可能输出顺序错误。

      1 #include<bits/stdc++.h>
      2 using namespace std;
      3 
      4 const int maxn=10010;
      5 
      6 struct Record{
      7     string carId;
      8     int hh;
      9     int mm;
     10     int ss;
     11     int time;
     12     string status;
     13     int flag;
     14 }rec[maxn],valid[maxn];
     15 
     16 int n,k;
     17 
     18 map<string,int> parkTime;
     19 
     20 int num=0;
     21 int maxTime=-1;
     22 
     23 
     24 bool cmp1(Record a,Record b){
     25     if(a.carId!=b.carId)
     26         return a.carId<b.carId;
     27     else
     28         return a.time<b.time;
     29 }
     30 
     31 bool cmp2(Record a,Record b){
     32     
     33     return a.time<b.time;
     34     
     35 }
     36 
     37 
     38 
     39 int main(){
     40     
     41     ios::sync_with_stdio(false);
     42     cin.tie(0);
     43     
     44     cin>>n>>k;
     45     
     46 //    scanf("%d%d",&n,&k);
     47     
     48     
     49     
     50     char c;
     51     Record temp;
     52     
     53     for(int i=0;i<n;i++){
     54         cin>>temp.carId>>temp.hh>>c>>temp.mm>>c>>temp.ss>>temp.status;
     55         
     56         //char str1[100];
     57         //char str2[100];
     58         //scanf("%s %d:%d:%d %s",&str1[0],&temp.hh,&temp.mm,&temp.ss,&str2[0]);
     59         //temp.carId=str1;
     60         //temp.status=str2;
     61         
     62             
     63         temp.time=temp.hh*3600+temp.mm*60+temp.ss;
     64         
     65         if(temp.status=="in")
     66             temp.flag=1;
     67         else
     68             temp.flag=2;
     69             
     70         rec[i]=temp;
     71     }    
     72     
     73     
     74     sort(rec,rec+n,cmp1);
     75     
     76     
     77     for(int i=0;i<n-1;i++){
     78         if(rec[i].carId==rec[i+1].carId&&
     79         rec[i].flag==1&&rec[i+1].flag==2){
     80             valid[num++]=rec[i];
     81             valid[num++]=rec[i+1];
     82             
     83             string carId=rec[i].carId;
     84             
     85             if(parkTime.count(carId)==0){
     86                 parkTime[carId]=0;
     87             }
     88             
     89             parkTime[carId]+=(rec[i+1].time-rec[i].time);
     90             
     91             maxTime=max(maxTime,parkTime[carId]);
     92             
     93         }
     94     }
     95     
     96     
     97     
     98     sort(valid,valid+num,cmp2);
     99     
    100     int now=0,nowCar=0;  //now必须放外面
    101     
    102     for(int i=0;i<k;i++){
    103         int hh,mm,ss;
    104         char c;
    105         
    106         cin>>hh>>c>>mm>>c>>ss;
    107         
    108         //scanf("%d:%d:%d",&hh,&mm,&ss);
    109         
    110         int queryTime=hh*3600+mm*60+ss;
    111         
    112     
    113         
    114         
    115         while(now<num&&valid[now].time<=queryTime){
    116             if(valid[now].flag==1) nowCar++;
    117             else nowCar--;
    118             
    119             now++;
    120             
    121         }
    122         
    123         cout<<nowCar<<endl;    
    124         
    125         //printf("%d
    ",nowCar);    
    126         
    127     }
    128     
    129     
    130 
    131     
    132     for(map<string,int>::iterator it = parkTime.begin(); it != parkTime.end();it++){
    133             if(it->second==maxTime)
    134             {
    135                 cout<<it->first<<" ";
    136                 
    137             //    printf("%s ",it->first.c_str());
    138             }
    139     }
    140     
    141     cout<<flush;  //清空cout缓存
    142     
    143     //cout<<maxTime<<" "<<parkTime["JH007BD"]<<" "<<parkTime["ZD00001"]<<endl;
    144     
    145     printf("%02d:%02d:%02d
    ",maxTime/3600,(maxTime/60)%60,maxTime%60);
    146     
    147     
    148     
    149     return 0;
    150 }

      

  • 相关阅读:
    Oracle 安装报错 [INS-06101] IP address of localhost could not be determined 解决方法输入日志标题
    Linux下安装oracle数据库提示DISPLAY not set. Please set the DISPLAY and try again。
    redhat 关机注销命令详解
    VirtualBox的四种网络连接方式
    修改RedHat的系统显示时间
    insufficient memory to configure kdump(没有足够的内存)解决方法(待验证、待解决)
    xen坑随笔 heartbeat dpkg垃圾数据库清除
    tomcat 监控脚本
    负载均衡随笔
    GIT命令介绍
  • 原文地址:https://www.cnblogs.com/moranzju/p/11100082.html
Copyright © 2020-2023  润新知