• 【转载】查看freebsd 服务器硬件信息


    http://3918479.blog.51cto.com/3908479/857900

    查看服务器的cpu配置

    Fb-bj138# dmesg | grep CPU

    CPU: Intel(R) Core(TM) i3 CPU       M 380  @ 2.53GHz (2527.07-MHz K8-class CPU)

    FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs

    cpu0: <ACPI CPU> on acpi0

    cpu1: <ACPI CPU> on acpi0

    cpu2: <ACPI CPU> on acpi0

    cpu3: <ACPI CPU> on acpi0

    查看服务器的内存

    Fb-bj138# dmesg | grep memory

    real memory  = 524288000 (500 MB)

    avail memory = 481828864 (459 MB)

    查看服务器磁盘分区使用情况

    Fb-bj138# df -Th

    Filesystem  Type     Size    Used   Avail Capacity  Mounted on

    /dev/da0a   ufs      9.9G    359M    8.7G     4%    /

    devfs       devfs    1.0k    1.0k      0B   100%    /dev

    /dev/da0d   ufs       14G    2.8G     10G    20%    /usr

    /dev/da0e   ufs       13G     32M     12G     0%    /data

    查看网络流量

    Fb-bj138# systat -if 2      //每2秒刷新一次,显示Traffic流量平均值,Peak峰值,Total总流量


                        /0   /1   /2   /3   /4   /5   /6   /7   /8   /9   /10

         Load Average   


          Interface           Traffic               Peak                Total

                em0  in      0.087 KB/s          0.496 KB/s           28.029 MB

                     out     0.374 KB/s          0.579 KB/s            4.217 MB

    查看硬盘大小

    Fb-bj138# diskinfo -vt /dev/da0        //da0是整个磁盘名

    /dev/da0

            512             # sectorsize

            42949672960     # mediasize in bytes (40G)

            83886080        # mediasize in sectors

            0               # stripesize

            0               # stripeoffset

            5221            # Cylinders according to firmware.

            255             # Heads according to firmware.

            63              # Sectors according to firmware.

                            # Disk ident.


    Seek times:

            Full stroke:      250 iter in   1.561636 sec =    6.247 msec

            Half stroke:      250 iter in   0.452481 sec =    1.810 msec

            Quarter stroke:   500 iter in   1.363145 sec =    2.726 msec

            Short forward:    400 iter in   1.191727 sec =    2.979 msec

            Short backward:   400 iter in   5.698081 sec =   14.245 msec

            Seq outer:       2048 iter in   0.431235 sec =    0.211 msec

            Seq inner:       2048 iter in   0.381998 sec =    0.187 msec

    Transfer rates:

            outside:       102400 kbytes in   0.512517 sec =   199798 kbytes/sec

            middle:        102400 kbytes in   0.265945 sec =   385042 kbytes/sec

            inside:        102400 kbytes in   0.298630 sec =   342899 kbytes/sec


    Fb-bj138# diskinfo -vt /dev/da0a         //da0a是磁盘分区

    /dev/da0a

            512             # sectorsize

            10737418240     # mediasize in bytes (10G)

            20971520        # mediasize in sectors

            0               # stripesize

            0               # stripeoffset

            1305            # Cylinders according to firmware.

            255             # Heads according to firmware.

            63              # Sectors according to firmware.

                            # Disk ident.


    Seek times:

            Full stroke:      250 iter in   0.596769 sec =    2.387 msec

            Half stroke:      250 iter in   0.512045 sec =    2.048 msec

            Quarter stroke:   500 iter in   0.466134 sec =    0.932 msec

            Short forward:    400 iter in   0.211083 sec =    0.528 msec

            Short backward:   400 iter in   1.091816 sec =    2.730 msec

            Seq outer:       2048 iter in   0.437509 sec =    0.214 msec

            Seq inner:       2048 iter in   0.446752 sec =    0.218 msec

    Transfer rates:

            outside:       102400 kbytes in   0.567034 sec =   180589 kbytes/sec

            middle:        102400 kbytes in   0.350021 sec =   292554 kbytes/sec

            inside:        102400 kbytes in   0.375098 sec =   272995 kbytes/sec

  • 相关阅读:
    STL hash_map使用
    STL的 string 类赋值
    STL map使用详解
    下面我使用vector容器为基础来构成一棵树
    MFC中CString.Format的详细用法
    error LNK2001: 无法解析的外部符号 "public: static class stdext::hash_map
    !!! STL的string类如何实现CString的Format功能 这是一个经典问题,记住
    STL map和STL set(转载)
    为什么提示此错误?RunTime Check Failure #2 Stack around the variable 'tch1'was corrupted.
    STL源码剖析
  • 原文地址:https://www.cnblogs.com/misstaste/p/5906453.html
Copyright © 2020-2023  润新知