• poj3177 无向连通图加多少条边变成边双连通图


    Redundant Paths
    Time Limit: 1000MS   Memory Limit: 65536K
    Total Submissions: 15752   Accepted: 6609

    Description

    In order to get from one of the F (1 <= F <= 5,000) grazing fields (which are numbered 1..F) to another field, Bessie and the rest of the herd are forced to cross near the Tree of Rotten Apples. The cows are now tired of often being forced to take a particular path and want to build some new paths so that they will always have a choice of at least two separate routes between any pair of fields. They currently have at least one route between each pair of fields and want to have at least two. Of course, they can only travel on Official Paths when they move from one field to another.

    Given a description of the current set of R (F-1 <= R <= 10,000) paths that each connect exactly two different fields, determine the minimum number of new paths (each of which connects exactly two fields) that must be built so that there are at least two separate routes between any pair of fields. Routes are considered separate if they use none of the same paths, even if they visit the same intermediate field along the way.

    There might already be more than one paths between the same pair of fields, and you may also build a new path that connects the same fields as some other path.

    Input

    Line 1: Two space-separated integers: F and R

    Lines 2..R+1: Each line contains two space-separated integers which are the fields at the endpoints of some path.

    Output

    Line 1: A single integer that is the number of new paths that must be built.

    Sample Input

    7 7
    1 2
    2 3
    3 4
    2 5
    4 5
    5 6
    5 7

    Sample Output

    2
    注意重边
    不能通过low值判断两个点在一个连通分量内,
    因为这样的数据 1-6都在一个联通块内,但6的low值和其他不同。
    6 7
    1 2
    2 3
    3 4
    4 6
    6 2
    4 5
    5 1
    但是貌似 没有影响?。因为虽然6的low值有变化,但是他不可能是叶节点,所以用low值水过去也是可以的吧


    就是缩点后找叶子结点的数目+1/2就是答案
    #include<cstdio>
    #include<cstring>
    #include<algorithm>
    using namespace std;
    const int N=5050;
    bool mp[N][N];
    int head[N],dfn[N],low[N],cont[N];
    int tot,cnt;
    struct node{
       int next,to;
    }e[N<<1];
    void add(int u,int v){
       e[tot].to=v;e[tot].next=head[u];head[u]=tot++;
       e[tot].to=u;e[tot].next=head[v];head[v]=tot++;
    }
    void Tajan(int u,int fa){
       dfn[u]=low[u]=++cnt;
       for(int i=head[u];i+1;i=e[i].next){
        int v=e[i].to;
        if(v==fa) continue;
        if(!dfn[v]) {
            Tajan(v,u);
            low[u]=min(low[v],low[u]);
        }
        else low[u]=min(low[u],dfn[v]);
       }
    }
    int main(){
        int n,m;
        while(scanf("%d%d",&n,&m)!=EOF){
            int u,v;
            memset(head,-1,sizeof(head));
            memset(mp,0,sizeof(mp));
            memset(cont,0,sizeof(cont));
            tot=cnt=0;
            while(m--){
                scanf("%d%d",&u,&v);
                if(mp[u][v]) continue;
                add(u,v);
                mp[u][v]=mp[v][u]=1;
            }
            Tajan(1,0);
            for(int i=1;i<=n;++i)
            for(int j=head[i];j+1;j=e[j].next){
                int v=e[j].to;
                if(low[v]!=low[i])
                    ++cont[low[i]];
            }
            int ans=0;
            for(int i=1;i<=n;++i)
                if(cont[i]==1) ++ans;
                printf("%d
    ",(ans+1)/2);
        }
    }
    #include<cstdio>
    #include<cstring>
    #include<algorithm>
    using namespace std;
    const int N=5050;
    bool mp[N][N];
    int head[N],dfn[N],low[N],cont[N],bl[N],q[N];
    int tot,cnt,scnt,l;
    struct node{
       int next,to;
    }e[N<<1];
    void add(int u,int v){
       e[tot].to=v;e[tot].next=head[u];head[u]=tot++;
       e[tot].to=u;e[tot].next=head[v];head[v]=tot++;
    }
    void Tajan(int u,int fa){
        q[l++]=u;
       dfn[u]=low[u]=++cnt;
       for(int i=head[u];i+1;i=e[i].next){
        int v=e[i].to;
        if(v==fa) continue;
        if(!dfn[v]) {
            Tajan(v,u);
            low[u]=min(low[v],low[u]);
        }
        else low[u]=min(low[u],dfn[v]);
       }
       if(dfn[u]==low[u]){
        int t;
        ++scnt;
        do{
            t=q[--l];
            bl[t]=scnt;
        }while(t!=u);
       }
    }
    int main(){
        int n,m;
        while(scanf("%d%d",&n,&m)!=EOF){
            int u,v;
            memset(head,-1,sizeof(head));
            memset(mp,0,sizeof(mp));
            memset(cont,0,sizeof(cont));
            l=scnt=tot=cnt=0;
            while(m--){
                scanf("%d%d",&u,&v);
                if(mp[u][v]) continue;
                add(u,v);
                mp[u][v]=mp[v][u]=1;
            }
            Tajan(1,0);
            for(int i=1;i<=n;++i)
            for(int j=head[i];j+1;j=e[j].next){
                int v=e[j].to;
                if(bl[v]!=bl[i])
                    ++cont[bl[i]];
            }
            int ans=0;
            for(int i=1;i<=n;++i)
                if(cont[i]==1) ++ans;
                printf("%d
    ",(ans+1)/2);
        }
    }
  • 相关阅读:
    ASP.NET Core应用针对静态文件请求的处理[1]: 以Web的形式发布静态文件
    在ASP.NET Core应用中如何设置和获取与执行环境相关的信息?
    如何远程关闭一个ASP.NET Core应用?
    ASP.NET Core应用中如何记录和查看日志
    ASP.NET Core中如影随形的”依赖注入”[下]: 历数依赖注入的N种玩法
    ASP.NET Core中如影随形的”依赖注入”[上]: 从两个不同的ServiceProvider说起
    学习ASP.NET Core, 怎能不了解请求处理管道[6]: 管道是如何随着WebHost的开启被构建出来的?
    学习ASP.NET Core, 怎能不了解请求处理管道[5]: 中间件注册可以除了可以使用Startup之外,还可以选择StartupFilter
    框架升级后某个类型所在程序集发生转移,应用还能正常运行吗?
    学习ASP.NET Core, 怎能不了解请求处理管道[4]: 应用的入口——Startup
  • 原文地址:https://www.cnblogs.com/mfys/p/7274105.html
Copyright © 2020-2023  润新知