• linux 系统信息查询


    众所周知,Linux大部分操作是通过命令实现的,并不像windows那么直观。linux查看硬件信息也是需要通过linux查看硬件信息命令查询的,下面小编来分享一下linux查看硬件信息的方法和命令写法。

    linux查看硬件信息

    一、查看cpu

    • lscpu
    Architecture: i686 #cpu架构
    CPU op-mode(s): 32-bit, 64-bit
    Byte Order: Little Endian #小尾序
    CPU(s): 4 #总共有4核
    On-line CPU(s) list: 0-3
    Thread(s) per core: 1 #每个cpu核,只能支持一个线程,即不支持超线程
    Core(s) per socket: 4 #每个cpu,有4个核
    Socket(s): 1 #总共有1一个cpu
    Vendor ID: GenuineIntel #cpu产商 intel
    CPU family: 6
    Model: 42
    Stepping: 7
    CPU MHz: 1600.000
    BogoMIPS: 5986.12
    Virtualization: VT-x #支持cpu虚拟化技术
    L1d cache: 32K
    L1i cache: 32K
    L2 cache: 256K
    L3 cache: 6144K
    
    • cat /proc/cpuinfo
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 6
    model : 42
    model name : Intel(R) Core(TM) i5-2320 CPU @ 3.00GHz
    .....
    #上面输出的是个cpu部分信息,还有3个cpu信息省略了。
    

    二、查看内存情况

    • free -m
    total used free shared buffers cached
    Mem: 3926 3651 274 0 12 404
    -/+ buffers/cache: 3235 691
    Swap: 9536 31 9505
    
    这里的单位是MB,总共的内存是3926MB。
    查看内存详细使用
    
    • cat /proc/meminfo
    MemTotal: 4020868 kB
    MemFree: 230884 kB
    Buffers: 7600 kB
    Cached: 454772 kB
    SwapCached: 836 kB
    .....
    

    三、查看内存硬件信息

    • dmidecode -t memory
    dmidecode 2.11
    
    SMBIOS 2.7 present.
    Handle 0x0008, DMI type 16, 23 bytes
    Physical Memory Array
    Location: System Board Or Motherboard
    ....
    Maximum Capacity: 32 GB
    ....
    Handle 0x000A, DMI type 17, 34 bytes
    ....
    Memory Device
    Array Handle: 0x0008
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 4096 MB
    .....
    #我的主板有4个槽位,只用了一个槽位,上面插了一条4096MB的内存。
    

    四、查看硬盘和分区分布

    • lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 465.8G 0 disk
    ├—sda1 8:1 0 1G 0 part /boot
    ├—sda2 8:2 0 9.3G 0 part [SWAP]
    ├—sda3 8:3 0 74.5G 0 part /
    ├—sda4 8:4 0 1K 0 part
    ├—sda5 8:5 0 111.8G 0 part /home
    └—sda6 8:6 0 269.2G 0 part
    

    五、如果要看硬盘和分区的详细信息

    • fdisk -l
    Disk /dev/sda: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disk identifier: 0x00023728
    Device Boot Start End Blocks Id System
    /dev/sda1 * 2048 2148351 1073152 83 Linux
    /dev/sda2 2148352 21680127 9765888 82 Linux swap / Solaris
    /dev/sda3 21680128 177930239 78125056 83 Linux
    /dev/sda4 177932286 976771071 399419393 5 Extended/dev/sda5 177932288 412305407 117186560 83 Linux
    /dev/sda6 412307456 976771071 282231808 83 Linux
    

    六、查看网卡硬件信息

    • lspci | grep -i 'eth'
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    

    七、查看系统的所有网络接口

    • ifconfig -a
    eth0 Link encap:以太网 硬件地址 b8:97:5a:17:b3:8f
    .....
    lo Link encap:本地环回
    .....
    
    • ip link show
    1: lo: mtu 16436 qdisc noqueue state DOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether b8:97:5a:17:b3:8f brd ff:ff:ff:ff:ff:ff
    
    • ethtool eth0
    Settings for eth0:
    Supported ports: [ TP MII ]
    Supported link modes: 10baseT/Half 10baseT/Full
    100baseT/Half 100baseT/Full
    1000baseT/Half 1000baseT/Full #支持千兆半双工,全双工模式
    Supported pause frame use: No
    Supports auto-negotiation: Yes #支持自适应模式,一般都支持
    Advertised link modes: 10baseT/Half 10baseT/Full
    100baseT/Half 100baseT/Full
    1000baseT/Half 1000baseT/Full
    Advertised pause frame use: Symmetric Receive-only
    Advertised auto-negotiation: Yes #默认使用自适应模式
    Link partner advertised link modes: 10baseT/Half 10baseT/Full
    100baseT/Half 100baseT/Full
    .....
    Speed: 100Mb/s #现在网卡的速度是100Mb,网卡使用自适应模式,所以推测路由是100Mb,导致网卡从支 持千兆,变成要支持百兆
    Duplex: Full #全双工
    .....
    Link detected: yes #表示有网线连接,和路由是通的
    

    八、查看pci信息,即主板所有硬件槽信息。

    • lspci
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) #主板芯片
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) #显卡
    00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) #usb控制器
    00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) #声卡
    00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) #pci 插槽
    00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4)
    00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4)
    00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04)
    00:1f.2 IDE interface: Intel Corporation Panther Point 4 port SATA Controller IDE mode #硬盘接口
    00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04)
    00:1f.5 IDE interface: Intel Corporation Panther Point 2 port SATA Controller IDE mode #硬盘接口
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) #网卡
    03:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8893 (rev 41)
    #如果要更详细的信息:lspci -v 或者 lspci -vv
    #如果要看设备树:lscpi –t
    

    九、查看bios信息

    • dmidecode -t bios
    ......
    BIOS Information
    Vendor: American Megatrends Inc.
    Version: 4.6.5
    Release Date: 04/25/2012
    .......
    BIOS Revision: 4.6
    ......
    
    dmidecode以一种可读的方式dump出机器的DMI(Desktop Management Interface)信息。这些信息包括了硬件以及BIOS,既可以得到当前的配置,也可以得到系统支持的配置,比如说支持的内存数等。
    

    十、如果要查看所有有用信息

    • dmidecode –q

    以上是linux查看硬件信息的所有命令,可以查看CPU、硬盘、网卡、磁盘等硬件的信息。

    魏美龍|DevOps Engineer|will_wei_devops@163.com
  • 相关阅读:
    java——对象学习笔记
    ORACLE中如何查看分区表信息
    postgresql相关系统表查询
    oracle系统表查询
    linux shell常用函数,ps
    文本文件合并
    nginx多版本PHP配置
    webuploader实现文件上传
    open abc.txt: The system cannot find the file specified
    PHP在线批量下载文件
  • 原文地址:https://www.cnblogs.com/meilong/p/10352381.html
Copyright © 2020-2023  润新知