cas与NGINX整合（转）

CAS (5) —— Nginx代理模式下浏览器访问CAS服务器配置详解

标签：服务器

2015-12-18 15:04 1633人阅读评论(0) 收藏举报

分类：

网络（61）

目录(?)[+]

http://www.cnblogs.com/richaaaard/p/5053108.html

tomcat版本: tomcat-8.0.29

jdk版本: jdk1.8.0_65

nginx版本: nginx-1.9.8

cas版本: cas4.1.2
cas-client-3.4.1

参考来源:

jasig.github.io:CAS protocol

https://github.com/Jasig/java-cas-client

以下的示例采用我博客的另外两篇文章中搭建好的测试环境举例

CAS (1) —— Mac下配置CAS到Tomcat（服务端）

CAS (2) —— Mac下配置CAS到Tomcat（客户端）

CAS (3) —— Mac下配置CAS客户端经代理访问Tomcat CAS

Mac为nginx安装nginx-sticky-module

【高可用HA】Nginx (1) —— Mac下配置Nginx Http负载均衡(Load Balancer)之101实例

Nginx (2) —— Mac下配置Apache Httpd的Https/SSL （待出）

目标架构

此代理非彼代理

在CAS官方网站上给出了一个“Proxy Web Flow Diagram”：

顺序图：(来源于http://jasig.github.io/cas/4.0.x/protocol/CAS-Protocol.html)

这个方案主要适用一种场景：

有两个应用App1和App2，它们都是受Cas Server保护的，即请求它们时都需要通过Cas Server的认证。现需要在App1中通过Http请求访问App2，显然该请求将会被App2配置的Cas的AuthenticationFilter拦截并转向Cas Server，Cas Server将引导用户进行登录认证，这样我们也就不能真正的访问到App2了。针对这种应用场景，Cas也提供了对应的支持。通过Proxy访问其它Cas应用

无论是用中文关键字在“度娘”，还是用英文关键字再“谷哥”上搜索，多数文章都是描述上面这样一个场景。

而我这里介绍的“代理”，并非是上述场景——依靠代理去验证ticket，“代理”在此的角色是：

只做分发反向代理（未来的负载均衡器）

* 注意：所以说“此代理非彼代理”

准备

要搭建上面这个环境会相对复杂，我们需要参照之前的文章准备以下必备的组件或环境：

2个Tomcat服务器作为客户端应用程序服务器（即cas的客户端）
```
app1.hoau.com:8081/8413(http/https)
app2.hoau.com:8082/8423(http/https)
```
参照Tomcat Cluster、Tomcat SSL和CAS Client
1个配置好SSL的Nginx服务器作为中间层代理转发服务器（后可扩展为LoadBalancer）
```
proxy.sso.hoau.com:85/443(http/https)
```
参照Nginx Load Balancer与Nginx Sticky Session
另一个1个带有SSL的Tomcat服务器作为CAS服务器
```
sso.hoau.com:8083/8433(http/https)
```
参照Tomcat SSL与CAS Server

关键配置

代理服务器（Nginx x 1）

nginx.conf

http

server:

server {
    listen       85;
    server_name  proxy.sso.hoau.com;
    location / {  
    #index index.html index.htm;
    #设置主机头和客户端真实地址，以便服务器获取客户端真实IP

    proxy_set_header   Host   $host;
    proxy_set_header   Referer $http_referer;
    proxy_set_header   Cookie $http_cookie;
    proxy_set_header   X-Real-IP  $remote_addr;
    proxy_set_header   X-Forwarded-For              $proxy_add_x_forwarded_for;

    proxy_redirect off;  
    #禁用缓存
    #proxy_buffering off;

    proxy_connect_timeout 3;
    proxy_send_timeout 30;
    proxy_read_timeout 30; 
    proxy_pass http://cas_server_http; 
}

upstream:

upstream cas_server_http {  
    #根据ip计算将请求分配各那个后端tomcat，许多人误认为可以解决session问题，其实并不能。  
    #同一机器在多网情况下，路由切换，ip可能不同  
    #ip_hash;   
    #sticky;

    #Richard: http
    server localhost:8083 weight=1 srun_id=c; 
    #server localhost:8084 weight=1 srun_id=c; 
    jvm_route $cookie_JSESSIONID|sessionid reverse;
}

*注意：

（1）以上的“jvm_route $cookie_JSESSIONID|sessionid reverse;”是关键配置，因为CAS是依赖于Session和Cookie进行身份验证的。

（2）srun_id=c，其中“c”需要与CAS服务器Tomcat server.xml文件里的jvmRoute配置“

<Engine name="Catalina" defaultHost="localhost" jvmRoute="c">”

https

server:

server { 
    listen 443;
    server_name  proxy.sso.hoau.com;
    ssl on; 
    ssl_certificate /Users/Richard/Documents/Dev/servers/cluster/nginx/keys/server.crt; 
    ssl_certificate_key  /Users/Richard/Documents/Dev/servers/cluster/nginx/keys/server.key; 

    ssl_session_timeout 5m;
    ssl_protocols SSLv3 TLSv1;
    ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP;
    ssl_prefer_server_ciphers on;

    location / {
        proxy_redirect off;  

        proxy_set_header Host $host;  
        proxy_set_header   Referer $http_referer;
        proxy_set_header   Cookie $http_cookie;
        proxy_set_header X-Real-IP $remote_addr;  
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-FORWARDED-HOST $server_addr;  
        proxy_set_header X-FORWARDED-PORT $server_port;

        proxy_connect_timeout 3;
        proxy_send_timeout 30;
        proxy_read_timeout 30;

        proxy_pass https://cas_server_ssl;
    }   
}

*注意：以上的ssl为关键配置“ssl_certificate”和“ssl_certificate_key”需要指向正确的证书和密钥。

upstream：

upstream cas_server_ssl {  
    #Richard: https todo
    server sso.hoau.com:8433 weight=1 srun_id=c;  
    #server sso.hoau.com:8443 weight=1 srun_id=c; 
    jvm_route $cookie_JSESSIONID|sessionid reverse;
}

*注意：以上http和https可以只配一项，或两者兼存皆可，端口不要冲突。

CAS客户端应用服务器（Tomcat x 2）

以下客户端的蓝本可以在github上收到（关键字：“cas-sample-java-webapp”），我这里只贴出自己的关键点和修改后的结果。

CAS客户端的应用服务器有两台，如果不使用Spring Security的集成，比较关键配置就只有pom.xml（编译）和web.xml（部署）：

两个环境编译类似，pom.xml（贴全了，有无冗余请自行解决）：

*注意：以下Spring Security相关依赖为非必须

<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>
    <groupId>iamlabs.unicon.net</groupId>
    <artifactId>cas-sample-java-webapp</artifactId>
    <version>0.0.1-SNAPSHOT</version>
    <packaging>war</packaging>
    <name>CAS Example Java Web App</name>
    <description>A sample web application that exercises the CAS protocol features via the Java CAS Client.</description>
    <build>
        <finalName>cas-sample-java-webapp</finalName>
        <plugins>
            <plugin>
                <groupId>org.apache.maven.plugins</groupId>
                <artifactId>maven-compiler-plugin</artifactId>
                <version>2.5.1</version>
                <configuration>
                    <source>1.7</source>
                    <target>1.7</target>
                </configuration>
            </plugin>
        </plugins>
    </build>

    <properties>       
        <spring.version>3.2.4.RELEASE</spring.version> 
        <casclient.version>3.4.1</casclient.version>        
    </properties>  

    <dependencies>

    <dependency>
        <groupId>commons-logging</groupId>
        <artifactId>commons-logging</artifactId>
        <version>1.1.1</version>
    </dependency>

    <!-- Logging -->    
    <dependency>  
        <groupId>org.slf4j</groupId>  
        <artifactId>slf4j-api</artifactId>  
        <version>1.7.13</version>  
    </dependency>  
    <dependency>  
        <groupId>org.slf4j</groupId>  
        <artifactId>slf4j-simple</artifactId>  
        <version>1.7.13</version>  
    </dependency>    
    <dependency>    
        <groupId>org.slf4j</groupId>    
        <artifactId>slf4j-log4j12</artifactId>    
        <version>1.7.13</version>   
    </dependency> 

    <dependency>
        <groupId>org.opensaml</groupId>
        <artifactId>opensaml1</artifactId>
        <version>1.1</version>
    </dependency>

    <dependency>
        <groupId>javax.servlet</groupId>
        <artifactId>javax.servlet-api</artifactId>
        <version>3.1.0</version>
        <scope>provided</scope>
    </dependency>

    <dependency>
        <groupId>org.jasig.cas.client</groupId>
        <artifactId>cas-client-core</artifactId>
        <version>${casclient.version}</version>
        <exclusions>
            <exclusion>
                <groupId>javax.servlet</groupId>
                <artifactId>servlet-api</artifactId>
            </exclusion>
        </exclusions>
    </dependency>

    <dependency>
        <groupId>org.jasig.cas.client</groupId>
        <artifactId>cas-client-integration-tomcat-common</artifactId>
        <version>${casclient.version}</version>
    </dependency>

    <dependency>
        <groupId>commons-codec</groupId>
        <artifactId>commons-codec</artifactId>
        <version>1.6</version>
    </dependency>

    <dependency>
        <groupId>org.apache.santuario</groupId>
        <artifactId>xmlsec</artifactId>
        <version>1.4.3</version>
    </dependency>

    <dependency>  
        <groupId>org.springframework</groupId>  
        <artifactId>spring-core</artifactId>  
        <version>${spring.version}</version>  
    </dependency>  
    <dependency>  
        <groupId>org.springframework</groupId>  
        <artifactId>spring-beans</artifactId>  
        <version>${spring.version}</version>  
    </dependency> 
     <dependency>  
        <groupId>org.springframework</groupId>  
        <artifactId>spring-context</artifactId>  
        <version>${spring.version}</version>  
    </dependency> 
     <dependency>  
        <groupId>org.springframework</groupId>  
        <artifactId>spring-web</artifactId>  
        <version>${spring.version}</version>  
    </dependency>  

    <dependency>  
       <groupId>org.springframework.security</groupId>
        <artifactId>spring-security-core</artifactId>
        <version>${spring.version}</version>  
    </dependency>
    <dependency>  
      <groupId>org.springframework.security</groupId>
        <artifactId>spring-security-web</artifactId>
        <version>${spring.version}</version>  
    </dependency>  
    <dependency>  
        <groupId>org.springframework.security</groupId>
        <artifactId>spring-security-config</artifactId>  
        <version>${spring.version}</version>  
    </dependency>  
    </dependencies>
</project>

https://app1.hoau.com:8413

web.xml:

<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">


     <context-param>
        <param-name>log4jConfigLocation</param-name>
        <param-value>/WEB-INF/log4j.properties</param-value>
    </context-param>


    <listener>
        <listener-class>org.springframework.web.util.Log4jConfigListener</listener-class>
    </listener>

    <!--
    <listener>
        <listener-class>org.jasig.cas.client.session.SingleSignOutHttpSessionListener</listener-class>
    </listener>
    <filter>
        <filter-name>CAS Single Sign Out Filter</filter-name>
        <filter-class>org.jasig.cas.client.session.SingleSignOutFilter</filter-class>
        <init-param>
            <param-name>casServerUrlPrefix</param-name>
            <param-value>https://proxy.sso.hoau.com:443</param-value>
        </init-param>
    </filter>

    <filter-mapping>
        <filter-name>CAS Single Sign Out Filter</filter-name>
        <url-pattern>/*</url-pattern>
    </filter-mapping>
    -->

    <filter>
        <filter-name>CAS Validation Filter</filter-name>
        <filter-class>org.jasig.cas.client.validation.Cas20ProxyReceivingTicketValidationFilter</filter-class>

        <!-- 
        <filter-class>org.jasig.cas.client.validation.Saml11TicketValidationFilter</filter-class> 
        --> 
        <!-- 
        <filter-class>org.jasig.cas.client.validation.Cas20ProxyReceivingTicketValidationFilter</filter-class>  
        --> 

    <init-param>
        <param-name>casServerUrlPrefix</param-name>
        <!--
        <param-value>https://sso.hoau.com:8433/cas</param-value>
        <param-value>https://proxy.sso.hoau.com:443/cas</param-value>
        -->
        <param-value>https://proxy.sso.hoau.com:443/cas</param-value>
    </init-param>

    <!---->

    <init-param>
        <param-name>serverName</param-name>
        <param-value>https://app1.hoau.com:8413</param-value>
    </init-param>

    <init-param>
        <param-name>redirectAfterValidation</param-name>
        <param-value>true</param-value>
    </init-param>
    <init-param>
        <param-name>useSession</param-name>
        <param-value>true</param-value>
    </init-param>
    <init-param>
        <param-name>acceptAnyProxy</param-name>
        <param-value>true</param-value>
    </init-param>
    <!-- 
    <init-param>
        <param-name>ticketValidatorClass</param-name>
        <param-value>org.jasig.cas.client.validation.Cas20ProxyTicketValidator</param-value>
    </init-param>
    -->
    <!-- http://haohaoxuexi.iteye.com/blog/2145751
    <init-param>
        <param-name>proxyReceptorUrl</param-name>
        <param-value>/proxyCallback</param-value>
    </init-param>
    <init-param>
        <param-name>proxyCallbackUrl</param-name>
        <param-value>https://app1.hoau.com:8413/cas1/proxyCallback</param-value>
    </init-param>
    -->
</filter>

<filter>
    <filter-name>CAS Authentication Filter</filter-name>
    <filter-class>org.jasig.cas.client.authentication.AuthenticationFilter</filter-class>
    <!-- 
    <filter-class>org.jasig.cas.client.authentication.Saml11AuthenticationFilter</filter-class> 
    -->
    <!-- 
    <filter-class>org.jasig.cas.client.authentication.AuthenticationFilter</filter-class> 
    -->
    <init-param>
        <param-name>casServerLoginUrl</param-name>
        <!--
        <param-value>https://sso.hoau.com:8433/cas/login</param-value>
        --> 
        <param-value>https://proxy.sso.hoau.com:443/cas/login</param-value>
    </init-param>
    <init-param>
        <param-name>serverName</param-name>
        <param-value>https://app1.hoau.com:8413</param-value>
    </init-param>
</filter>

<filter>
    <filter-name>CAS HttpServletRequest Wrapper Filter</filter-name>
    <filter-class>org.jasig.cas.client.util.HttpServletRequestWrapperFilter</filter-class>
</filter>

<filter-mapping>
    <filter-name>CAS Validation Filter</filter-name>
    <url-pattern>/*</url-pattern>
</filter-mapping>

<filter-mapping>
    <filter-name>CAS Authentication Filter</filter-name>
    <url-pattern>/*</url-pattern>
</filter-mapping>

<filter-mapping>
    <filter-name>CAS HttpServletRequest Wrapper Filter</filter-name>
    <url-pattern>/*</url-pattern>
</filter-mapping>

<!--
<servlet>
    <servlet-name>ProxyValidate</servlet-name>
    <servlet-class> edu.yale.its.tp.cas.servlet.ProxyValidate</servlet-class>
</servlet>


<servlet> 
    <servlet-name>ProxyTicketReceptor</servlet-name> 
    <servlet-class>edu.yale.its.tp.cas.proxy.ProxyTicketReceptor</servlet-class> 
</servlet > 

<servlet-mapping> 
    <servlet-name>ProxyTicketReceptor</servlet-name> 
    <url-pattern>/CasProxyServlet </url-pattern> 
</servlet-mapping >
-->
<welcome-file-list>
    <welcome-file>
        index.jsp
    </welcome-file>
</welcome-file-list>
</web-app>

*注意：

“CAS Validation Filter”需要放在“CAS Authentication Filter”之前

此代理非彼代理

网上一些文章说的需要配置诸如：

“SingleSignOutHttpSessionListener”

“SingleSignOutFilter”

“ticketValidatorClass”

“ProxyValidate”

“ProxyTicketReceptor”

均不需要

如果误配了SingleSignOutFilter，会出现异常

Caused by: java.io.IOException: Server returned HTTP response code: 500 for URL: https://proxy.sso.hoau.com:443/cas/proxyValidate?ticket=ST-31-TM9EbFoQbasNdXh11HaJ-cas01.sso.hoau.com&service=https%3A%2F%2Fapp2.hoau.com%3A8423%2Fcas2%3Bjsessionid%3D0CEB865B53E64FF31BF02A496DF73860.tomcat2

  at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(HttpURLConnection.java:1840)
  at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1441)
  at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(HttpsURLConnectionImpl.java:254)
  at org.jasig.cas.client.util.CommonUtils.getResponseFromServer(CommonUtils.java:429)
  ... 24 more

* https://app2.hoau.com:8423
    
    web.xml配置同上
    >*注意：修改端口

CAS服务器（Tomcat x 1）
- 服务端https://sso.hoau.com:8433
  
  *注意：
  
  系列文章CAS (1) —— Mac下配置CAS到Tomcat（服务端）中介绍服务端配置也无需任何修改。
  以下配置：
  1. “Proxy (PGT acquisition)”
  2. “Modern proxy-service validation”
  均不需要

测试

*1. 访问“https://app1.hoau.com:8413/cas1”

会重定向到“https://proxy.sso.hoau.com/cas/login?service=https%3A%2F%2Fapp1.hoau.com%3A8413%2Fcas1”

*2. 然后输入用户明密码（test01/psw01）

如果验证成功，则会将浏览器重定向到app1的登陆成功页面。

*3. 再次访问“https://app1.hoau.com:8413/cas1”

可以直接进入登陆成功页，而无需输入用户名密码。

*4. 访问另一应用

同样可以通过test01用户直接进入登陆成功页，而无需输入用户名密码。

代理下的网络顺序分析

相关阅读:
网站精准查询IP
JQuery插件模板
 SQLSERVER 数据从一张那个表复制到另一张表
 C# 取form表单的数据
 C# 判断网络文件是否存在
 C# 将文件转换为 Stream
C# 将 Stream 写入文件
 JDBC教程
 Spring Boot教程
 JavaMail
原文地址：https://www.cnblogs.com/lupeng2010/p/6088461.html