1、fpga没有用的的管脚一定要设置成高阻状态设置路径如下:
Assignmen->Device->Device&Pin Option->Unused pins->As inputs tri-stated。
如果不设置高阻可能导致电路微弱电流或其他作用,例如:有led时可能有微弱电流通过led发光。
2、管脚锁定有提示:
Error: Can't place multiple pins assigned to pin location Pin_xxx (IOPAD_X34_Y18_N21)
解决办法:
转载请注明出处--工匠小建