odin update system

odin update system

https://samfrew.com/download/Galaxy__Tab__S6__Lite__-Wi-Fi-__/tz5x/CHN/P610ZCU2DUJ1/P610CHN2DUJ1/

https://samfw.com/firmware/SM-P610/CHN/P610ZCU2CUC1

https://samfrew.com/model/SM-P610/region/CHN/?__cf_chl_captcha_tk__=pmd_FwKdZvRPvfi7edBsQrhM5HV4Ige2OPxAIdaCDVplDbE-1635006233-0-gqNtZGzNA1CjcnBszQxl

启动“设置”，点击“软件更新”，然后点击“下载并安装”来检查您所在地区是否已经有新的更新。

一、准备

1. 备份到三星云，电脑上都可以。
2. 删除三星账户，谷歌账户；【设置】--【个人用户名】-最下面【退出登录】。
3. 所需下载软件：
4. odin:https://odindownload.com/download/
5. 下载固件：看平板背面型号：
   ​ 如果是SM-P610,对应的下载链接：https://samfw.com/firmware/SM-P610/CHN/P610ZCU2CUC1
   ​ 如果是SM-P615N（韩版）：对应的链接：https://samfw.com/firmware/SM-P615N
   ​ 如果是SM-P615C(国内LTE版)，还没有OneUI3.1固件发布，可以使用更改CSC码的方式，选择其他地区；
   选择 Download Server AFH,(注意浏览器需要关闭adblock等广告屏蔽软件)，选择任意的一个链接下载即可。
6. 解压下载的文件；

二、进入煤油模式(Download model)

1. 首先，关闭平板；
2. 如果弹出SAMSUNG Galaxy徽标，请按减小音量 + 增大音量，然后使用Type-C USB电缆将平板电脑与PC **连接。
3. 当您看到【Download mode】信息时，释放所有键。
4. 按音量上选择确定

三、更新系统

1. 打开odin；（ https://odindownload.com/download/Odin3_v3.14.1.zip ）
2. 点击odin软件中的bl, ap,csc三处，找到前面下载解压后的固件文件，依次选中；注意由于wifi版本不需要数据驱动所以不用点击里面的CP，另外下载的文件中包含一个头文件为HOME-CSC的文件，不用选择。
3. 点击start.完成后出现success字样，平板自动重启。

-------------------------------------------------

How to unlock::
1. Turn on your device and then go to settings --> scroll down to about tablet --> Software Information then tap the Build number 7 or 8 times or until it says you unlocked developer options.
2. Go to developer options and tick OEM UNLOCK and then a warning will pop up and just accept it.
3. Turn off your device, then while holding both volume up and down, connect your device to the pc.
4. A New screen should appear saying stuff about custom roms and stuff, Jut hold and press the up button until it resets. ( THis will erase everything on the tablet)
5. if you're like me and set up the tablet and went straightfoward to unlocking the bootloader, follow this guide: https://forum.xda-developers.com/galaxy-s8/how-to/how-to-bypass-rmm-prenormal-to-install-t3891193
So you wont have any issues flashing roms a nd stuff and dont have to wait 7 days.
6. Now your bootloader should be unlocked! (To enter download/odin mode: Do the same thing, Turn off the device and hold both volume buttons while connecting to the pc then instead of long pressing up, just press up once.)

How to root:
1. Download the firmware for your your tablet, i dont know if i can link the sites but you can google it.
2. Extract only the AP portion of the firmware.
3. Open up the AP portion with 7-zip or winrar
4. extract the boot.img.lz4 out of the AP file
5. Download Lz4 https://github.com/lz4/lz4/releases to your pc corresponding version.
6. Extract the LZ4 to the same area where the boot.img.lz4 is
7. Open command prompt in that folder and then do

Code:

lz4 boot.img.lz4 boot.img

8. Move the boot.img to your tablet, open up magisk manager then clicked Advanced Settings or Advanced, then untick Perserve AVB 2.0/Dm-verity and FIle Encryption then patch it.
9. Take the patched_magisk out of the tablet to your pc and then rename it from magisk_patched.img to boot.img
10. Use 7-zip or winrar and right click on the boot.img and add to archive
11. Select Tar (This is 7-zip havent tried winrar)
12. Once its complete use odin to flash that boot.tar on the AP Section
13. You should now be rooted

-------------------------------------------------

I want to tell how to bypass RMM state: prenormal to install TWRP
Also this will resolve "Only official binaries are allowed"

1. Download latest Stock base via SamFirm
2. Install latest Stock base via Odin Odin v3.13.1 direct download
3. Boot into system
4. Skip the setup
5. Activate Developer settings
6. search and turn of automatic system update
7. Go to time settings and deactivate automatic time

10. Look if latest time searched for updates is the date which you have set. (for me 20th Dec 2018)
11. Reboot your device
12. go into the time settings and reactivate the automatic time

24. Flash your preferred Rom!

1. Download CRL3 via Samfirm SamFirm Download from mega.nz
2. Install CRL3 via Odin Odin v3.13.1 direct download
3. Boot Stock CRL3 after install with Odin

-------------------------------------------------

https://www.getdroidtips.com/download-latest-magisk-zip-magisk-manager-root-phone/

Note: Your KNOX status will be tripped once you Unlock the Bootloader and Root the device

Prerequisites

1. You need a PC with Windows 7 or the latest to follow this Guide.
2. Download the Odin Flash tool based on the Android version of your device.
3. The device should be charged to at least 50%, to avoid any unwanted interruption during flashing which can lead to Bricked devices or a Bootloop.

How to Root Samsung Galaxy Tab S6 Lite with Magisk

Step 1: Unlock the Bootloader.

Step 2: Download Firmware for Samsung Galaxy Tab S6 Lite and Extract boot.img.lz4 file.

Step 3: Use lz4tool to compress the file and Patch the Boot.img using Magisk Manager.

Step 4: Make a tar file with 7-zip and flash the Patched Boot.tar using PC (Odin).

Step 5: Factory Reset the Device and Boot into the System with Magisk.

Step 1: Unlock the Bootloader

Unlocking Bootloader in Samsung devices can be done without PC, just follow these steps:

1. Go to the Settings -> About Phone, and then Tap on “Build Number” 10 times.
2. Enter your PIN or Password to Enable Developer options.
3. The Developers Option will appear in Settings, Open it and Enable the “OEM Unlock”.
4. Boot Into Download mode by Turning OFF your device, connect it to PC via Type-C cable and then hold Volume Down + Power Button. Release all the buttons once you see a change in screen and then press Volume Up to go into Download Mode.
5. Once the Device boot into Download mode, hold the Volume Up Button, this will Wipe all the data in the phone and will unlock the Bootloader.
6. The phone will reboot to the System, now Connect to the Wifi and Skip the Setup.
7. Go to Settings -> About Phone and Tap on “Build Number” 7 times.
8. Go to the Developers Options again and Check if the OEM Unlock is greyed out, if it is, then Bootloader is Unlocked.

Step 2: Extract AP_[device_model_sw_ver].tar.md5 from Firmware and then boot.img.lz4 from it

1. Download the Stock ROM for your Device given above in the Download Section. The Frija tool is free and works on Windows. If you are on Mac or Linux, then use SamFrew.
2. Transfer the downloaded Stock Firmware to your PC and extract it, Find the file with the name “AP_[device_model_sw_ver].tar.md5”
3. Use 7zip to extract the AP file

Step 3: Use lz4tool to compress boot.img and Patch the file using the Magisk Manager app

1. Go to the extracted AP file folder and pass the boot.img.lz4 through the lz4tool
2. Move the new boot.img file that you just compressed with lz4 to the phone
3. Download the Magisk Manager from Above and Install it
4. Open the App and Tap on Install
5. Choose the option “Select and Patch file”
6. Find the boot.img file you extracted and transferred to your device
7. Magisk Manager will patch the file and the file will be saved as magisk_patched.img

Step 4: Make a new tar  Boot file and Flash the patched boot.tar using Odin

1. Move the magisk_patched.img to your PC and rename it to boot.img
2. create a new folder with the name “boot” and move the patched boot.img to it, also move the vbmeta and recovery file you extracted from the AP file in the last step.
3. Use 7-Zip to compress the folder to a .tar format
4. Download the Odin 3.14 Flash Tool from Above and Install it.
5. Boot Into Download mode by Turning OFF your device, connect it to PC via Type-C cable and then hold Volume Down + Power Button. Release all the buttons once you see a change in screen and then press Volume Up to go into Download Mode.
6. Open Odin flash tool and click on AP, select the magisk_patched.tar file.
7. Select the other BL, CP, and CSC files from the Firmware you downloaded.
8. Uncheck Auto Reboot in options and Click on Install.
9. This will flash the patched AP file on your device and Samsung Galaxy Tab S6 Lite is now Rooted.

Step 5: Full Wipe the System and Boot into System with Magisk

1. Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press the combo key Power + Volume Up to boot to recovery. Continue pressing the volume up button until you see the stock recovery screen.
2. Use the Volume Buttons to Choose Wipe data/factory reset
3. Boot to the System and the device is rooted. You can check the root status on the Magisk Manager app.

That’s it. You have successfully Rooted Samsung Galaxy Tab S6 Lite.

==================

https://github.com/sandboxie-plus/Sandboxie

https://www.manticorejailbreak.com/
https://unc0ver.dev/

https://github.com/SmileZXLee/IpaDownloadTool
https://iphonecake.com/
https://www.3u.com/
https://www.pandahelp.vip/

https://github.com/topjohnwu/Magisk/
https://github.com/Magisk-Modules-Repo
https://coolapk.com/apk/moe.shizuku.redirectstorage

https://apkpure.com
https://www.aptoide.com/
https://www.apkmirror.com/
https://www.apkmonk.com
http://www.apkhere.com
http://www.uptodown.com/
https://apkhome.org/
http://www.uptodown.com/android
http://www.9apps.com/
http://www.1mobile.com/
http://download.cnet.com/android/
https://www.mobango.com/

============= End