• 1111 Online Map (30 分)


    1111. Online Map (30)
    Input our current position and a destination, an online map can recommend several paths. Now your job is to recommend two paths to your user: one is the shortest, and the other is the fastest. It is guaranteed that a path exists for any request.

    Input Specification:

    Each input file contains one test case. For each case, the first line gives two positive integers N (2 <= N <= 500), and M, being the total number of streets intersections on a map, and the number of streets, respectively. Then M lines follow, each describes a street in the format:

    V1 V2 one-way length time

    where V1 and V2 are the indices (from 0 to N-1) of the two ends of the street; one-way is 1 if the street is one-way from V1 to V2, or 0 if not; length is the length of the street; and time is the time taken to pass the street.

    Finally a pair of source and destination is given.

    Output Specification:

    For each case, first print the shortest path from the source to the destination with distance D in the format:

    Distance = D: source -> v1 -> … -> destination

    Then in the next line print the fastest path with total time T:

    Time = T: source -> w1 -> … -> destination

    In case the shortest path is not unique, output the fastest one among the shortest paths, which is guaranteed to be unique. In case the fastest path is not unique, output the one that passes through the fewest intersections, which is guaranteed to be unique.

    In case the shortest and the fastest paths are identical, print them in one line in the format:

    Distance = D; Time = T: source -> u1 -> … -> destination

    知识点: Dijkstra算法; DFS算法

    思路:

    第一是求最短路径,有相同的则输出时间最短;利用Dijkstra求解,更新最短路时,如果最短路相同,则比较时间

     1 if(!visited[i]){
     2     if(minl[i]>minD+G_l[minV][i]){
     3         minl[i]=minD+G_l[minV][i];
     4         mint[i]=mint[minV]+G_t[minV][i];
     5         pre_shorest[i]=minV;
     6     }else if(minl[i]==minD+G_l[minV][i]&&
     7             mint[i]>mint[minV]+G_t[minV][i]){
     8         mint[i]=mint[minV]+G_t[minV][i];
     9         pre_shorest[i]=minV;        
    10     }
    11 }

    第二是求最快路,如果有相同的,输出节点最少的:用Dijkstra算法,设立容器pre来储存每个节点的优选前去节点;然后用DFS来遍历每条路径,选出最少节点的

     1 for(int i=0;i<n;i++){
     2     if(!visited[i]){
     3         if(mint[i]>minD+G_t[minV][i]){
     4             mint[i]=mint[minV]+G_t[minV][i];
     5             pre_faster[i].clear();
     6             pre_faster[i].push_back(minV);
     7         }else if(mint[i]==minD+G_t[minV][i]){
     8             pre_faster[i].push_back(minV);        
     9         }
    10     }
    11 }

    最后,vector可以比较,相同的情况特殊处理

    Sample Input 1:
    10 15
    0 1 0 1 1
    8 0 0 1 1
    4 8 1 1 1
    3 4 0 3 2
    3 9 1 4 1
    0 6 0 1 1
    7 5 1 2 1
    8 5 1 2 1
    2 3 0 2 2
    2 1 1 1 1
    1 3 0 3 1
    1 4 0 1 1
    9 7 1 3 1
    5 1 0 5 2
    6 5 1 1 2
    3 5
    Sample Output 1:
    Distance = 6: 3 -> 4 -> 8 -> 5
    Time = 3: 3 -> 1 -> 5
    Sample Input 2:
    7 9
    0 4 1 1 1
    1 6 1 1 3
    2 6 1 1 1
    2 5 1 2 2
    3 0 0 1 1
    3 1 1 1 3
    3 2 1 1 2
    4 5 0 2 2
    6 5 1 1 2
    3 5
    Sample Output 2:
    Distance = 3; Time = 4: 3 -> 2 -> 5

    #include <iostream>
    #include <string>
    #include <vector>
    using namespace std;
    const int maxn = 550;
    const int inf = 999999;
    
    int n,m;
    int G_l[maxn][maxn];
    int G_t[maxn][maxn];
    int minl[maxn];
    int mint[maxn];
    int visited[maxn];
    int pre_shorest[maxn];
    vector<int> pre_faster[maxn];
    vector<int> s_path;
    vector<int> f_path;
    vector<int> f_tmpp;
    int minsize;
    
    
    int dijkstra_shorest(int start,int end){
    	fill(pre_shorest, pre_shorest+maxn, -1);
    	fill(minl,minl+maxn,inf);
    	fill(mint,mint+maxn,inf);
    	fill(visited,visited+maxn,0);
    	minl[start] = 0;
    	for(int i=0;i<n;i++){
    		int minV=-1, minD=inf;
    		for(int i=0;i<n;i++){
    			if(minl[i]<minD && !visited[i]){
    				minV=i;
    				minD=minl[i];
    			}
    		}
    		if(minV==-1) break;
    		visited[minV] = 1;
    		for(int i=0;i<n;i++){
    			if(!visited[i]){
    				if(minl[i]>minD+G_l[minV][i]){
    					minl[i]=minD+G_l[minV][i];
    					mint[i]=mint[minV]+G_t[minV][i];
    					pre_shorest[i]=minV;
    				}else if(minl[i]==minD+G_l[minV][i]&&
    						mint[i]>mint[minV]+G_t[minV][i]){
    					mint[i]=mint[minV]+G_t[minV][i];
    					pre_shorest[i]=minV;		
    				}
    			}
    		}
    	}
    	int ptr = end;
    	while(ptr != -1){
    		//printf(" %d
    ",ptr);
    		s_path.push_back(ptr);
    		ptr=pre_shorest[ptr];
    	}
    	return minl[end];
    }
    
    void DFS(int v,int start){
    	f_tmpp.push_back(v);
    	if(v==start){
    		if(f_tmpp.size()<minsize){
    			f_path=f_tmpp;
    			minsize=f_tmpp.size();
    		}
    		f_tmpp.pop_back();
    		return;
    	}
    	for(int i=0;i<pre_faster[v].size();i++){
    		DFS(pre_faster[v][i], start);
    	}
    	f_tmpp.pop_back();
    }
    
    int dijkstra_fastest(int start,int end){
    	fill(mint,mint+maxn,inf);
    	fill(visited,visited+maxn,0);
    	mint[start] = 0;
    	for(int i=0;i<n;i++){
    		int minV=-1, minD=inf;
    		for(int i=0;i<n;i++){
    			if(mint[i]<minD && !visited[i]){
    				minV=i;
    				minD=mint[i];
    			}
    		}
    		if(minV==-1) break;
    		//printf(". %d
    ",minV);
    		visited[minV] = 1;
    		for(int i=0;i<n;i++){
    			if(!visited[i]){
    				if(mint[i]>minD+G_t[minV][i]){
    					mint[i]=mint[minV]+G_t[minV][i];
    					pre_faster[i].clear();
    					pre_faster[i].push_back(minV);
    				}else if(mint[i]==minD+G_t[minV][i]){
    					pre_faster[i].push_back(minV);		
    				}
    			}
    		}
    	}
    	minsize = inf;
    	DFS(end,start);
    	for(int i=0;i<f_path.size();i++){
    		//printf("%d
    ",f_path[i]);
    	}
    	return mint[end];
    }
    
    int main(int argc, char *argv[]) {
    	fill(G_l[0],G_l[0]+maxn*maxn,inf);
    	fill(G_t[0],G_t[0]+maxn*maxn,inf);
    	
    	scanf("%d %d",&n,&m);
    	int v1,v2,oneway,len,tim;
    	for(int i=0;i<m;i++){
    		scanf("%d %d %d %d %d",&v1,&v2,&oneway,&len,&tim);
    		if(!oneway){
    			G_l[v1][v2]=len;
    			G_l[v2][v1]=len;
    			G_t[v1][v2]=tim;
    			G_t[v2][v1]=tim;
    		}else{
    			G_l[v1][v2]=len;
    			G_t[v1][v2]=tim;
    		}
    	}
    	scanf("%d %d",&v1,&v2);
    	
    	int D = dijkstra_shorest(v1,v2);
    	
    	int T = dijkstra_fastest(v1,v2);
    	
    	if(s_path==f_path){
    		printf("Distance = %d; Time = %d: ",D,T);
    		for(int i=s_path.size()-1;i>=0;i--){
    			printf("%d",s_path[i]);
    			if(i!=0) printf(" -> ");
    		}
    	}else{
    		printf("Distance = %d: ",D);
    		for(int i=s_path.size()-1;i>=0;i--){
    			printf("%d",s_path[i]);
    			if(i!=0) printf(" -> ");
    		}
    		printf("
    Time = %d: ",T);
    		for(int i=f_path.size()-1;i>=0;i--){
    			printf("%d",f_path[i]);
    			if(i!=0) printf(" -> ");
    		}
    	}
    }
    

     

  • 相关阅读:
    让一个 csproj 项目指定多个开发框架
    推荐近乎免费的调试神器——OzCode
    再也不用克隆多个仓库啦!git worktree 一个 git 仓库可以连接多个工作目录
    .NET Core 和 .NET Framework 中的 MEF2
    将 WPF、UWP 以及其他各种类型的旧样式的 csproj 文件迁移成新样式的 csproj 文件
    .NET 中的轻量级线程安全
    卡诺模型(KANO Model)
    C#/.NET 匿名函数会捕获变量,并延长对象的生命周期
    迫不及待地体验了一把 C#8.0 中的可空引用类型(Nullable Reference)
    异步任务中的重新进入(Reentrancy)
  • 原文地址:https://www.cnblogs.com/lokwongho/p/9932066.html
Copyright © 2020-2023  润新知