CodeFroces New Assignment 二分图匹配

There is a class consisting of n students, in which each one has a number representing his/her personality. The teacher gives the students a new assignment and asks them to solve it in groups so that each group can contain two students at most.

Students cannot create groups as they please because the teacher gives the following rules that must be met in order for a group to be valid:

• The group can be‎由‎of one male student, one female student, or male and female students.
• If the number of students in the group is two, these students must share common interests. Two students i and j share interests if and only if their numbers a_i and a_j share common divisor d > 1.

Since this is a really diverse class, no triple of students share a common interest, therefore all triples a_i, a_j, a_k are co-primes (i.e. gcd(a_i, a_j, a_k) ≡ 1).

Your task is to distribute the students into groups such that each student must join exactly one group, and the number of groups is as minimal as possible. Can you?

Input

The first line contains an integer T (1 ≤ T ≤ 100), in which T is the number of test cases.

The first line of each test case contains an integer n (1 ≤ n ≤ 10⁴), in which n is the number of students in the class.

Then a line follows containing n integers a₁, a₂, ..., a_n (1 ≤ a_i ≤ 10⁶), in which a_i if the personality of the i^th student. Then a line follows containing n space-separated characters p₁, p₂, ..., p_n (), in which p_i is "M" if the i^th student is male, and "F" if she is female.

‎ ‎‎n‎‎ ‎‎总测试用例的总和不超过‎ 3 × 10⁵.

Output

For each test case, print a single line containing the minimum number of groups that can be formed in the class.

Example

Input

2
2
3 6
M F
5
5 6 7 10 21
F F F M M

Output

1
3

Note

In the second test case, the minimum number of groups is 3, in which the first group consists of the 1^st and 4^th students, the second group consists of the 2^nd student, and the third group consists of the 3^rd and 5^th students.

思路：第一反应是二分图匹配找到最大匹配数，再看数据n有1e4，而且T有1e2，用匈牙利可能会超时，所以用网络流写法；再思考如何建图连边，暴力n²会超时，只能想如何优化建边了。

想到题目要求两人gcd > 1，所以把每个人对应的数字拆分质因数，我这里先将女生的数的质因数通过df函数(作用就是得出该数的所有质因数且不记录重复的质因数)放入vector数组k[素数(质因数)][i]=女生对应的编号，在通过同样意义的df'数组将男生的数分解质因数，此时不用保存在数组里了，可以直接吧有该质因数的vector数组里的女生连边。

这样就能建图然后利用网络流跑一遍最大匹配，用总数减去最大匹配数得到结果了。

注：vector数组k[素数][i]里的素数并不是直接对应的素数，因为a[i]最大有1e6，所以直接存会很浪费空间，于是首先用素数筛将素数全部找出并标号，k[i][j]的第一维表示的是第i个素数。

贴一发优化llw大佬后的代码

#include<iostream>
#include<algorithm>
#include<cstring>
#include<string>
#include<vector>
#include<cstdio>
#include<cstdlib>
#include<cmath>
#include<queue>
#include<map>
#include<set>
#include<stack>

using namespace std;
typedef long long ll;
typedef unsigned long long ull;
typedef pair<int,int> P;

#define bug printf("*********
");
#define debug(x) cout<<"["<<x<<"]" <<endl;
#define mid (l+r)/2
#define chl 2*k+1
#define chr 2*k+2
#define lson l,mid,chl
#define rson mid,r,chr
#define pb push_back
#define mem(a,b) memset(a,b,sizeof(a));

const long long mod=998244353;
const int maxn=1e6+5;
const int INF=0x7fffffff;
const int inf=0x3f3f3f3f;
const double eps=1e-8;
const double pi=acos(-1);


struct edge {
    int to,cap,rev;
};
vector <edge> G[maxn];
int level[maxn];
int iter[maxn];

void init(int _n) {
    for(int i=0; i<=_n; i++) {
        G[i].clear();
    }
}

void bfs(int s) {
    memset(level,-1,sizeof(level));
    queue<int> que;
    level[s]=0;
    que.push(s);
    while(!que.empty()) {
        int v= que.front();
        que.pop();
        for(int i=0; i<G[v].size(); i++) {
            edge & e=G[v][i];
            if(e.cap>0&&level[e.to]<0) {
                level[e.to]=level[v] + 1;
                que.push(e.to);
            }
        }
    }
}

void add(int from,int to,int cap) {
    edge eg;
    eg.to=to;
    eg.cap=cap;
    eg.rev=G[to].size();
    G[from].push_back(eg);
    eg.to=from;
    eg.cap=0;
    eg.rev=G[from].size()-1;
    G[to].push_back(eg);
}

int dfs(int v,int t,int f) {
    if(v == t)return f;
    for(int &i = iter[v]; i < G[v].size(); i++) {
        edge &e=G[v][i];
        if(e.cap>0 && level[v]<level[e.to]) {
            int d=dfs(e.to,t,min(f,e.cap));
            if(d>0) {
                e.cap-=d;
                G[e.to][e.rev].cap+=d;
                return d;
            }
        }
    }
    return 0;
}
int maxflow(int s,int t) {
    int flow=0;
    for(;;) {
        bfs(s);
        if(level[t]<0)return flow;
        memset(iter,0,sizeof(iter));
        int f;
        while((f = dfs(s,t,INF))>0) {
            flow +=f;
        }
    }
}

int a[maxn],b[maxn];
int prime[maxn];//存这是第几个素数
vector<int> v;//存素数
void sieve(int _n) {
    int tot=0;
    memset(prime,0,sizeof(prime));
    prime[0]=-1;
    prime[1]=-1;
    for(int i=2; i<=_n; i++) {
        if (prime[i]==0) {
            prime[i]=tot++;
            v.push_back(i);
            for(int j=i*2; j<=_n; j+=i) {
                prime[j]=-1;
            }
        }
    }
}

vector<int> k[maxn/10];//大概估计一下区间内素数个数不足总数1/10

void df(int x,int pos) {//x为本身的数，pos为标号
    if(x==1)return;//1与任何数gcd都是1所以直接不考虑
    for(int i=0; i<v.size(); i++) {
        if(x<v[i]) {//任何数的质因数肯定小于等于本身，大于就return了
            return ;
        }
        if(prime[x]!=-1) {//为素数
            k[prime[x]].push_back(pos);
            return ;
        }
        if(x%v[i]==0)k[i].push_back(pos);//如果是合数就判断当前枚举素数是不是该合数的质因数
        while(x%v[i]==0) {//去掉重复质因数
            x/=v[i];
        }
    }
}
void df2(int x,int pos) {
    if(x==1)return;
    for(int i=0; i<v.size(); i++) {
        if(x<v[i]) {
            return ;
        }
        if(prime[x]!=-1) {
            i=prime[x];
            for(int j=0; j<k[i].size(); j++) {//与有相同质因数的女生全部连边
                add(k[i][j],pos,1);
            }
            return ;
        }
        if(x%v[i]==0) {
            for(int j=0; j<k[i].size(); j++) {//同上
                add(k[i][j],pos,1);
            }
        }
        while(x%v[i]==0) {
            x/=v[i];
        }
    }
}

int main() {
    sieve(1e6+1);//预处理素数筛
    int t,n;
    scanf("%d",&t);
    while(t--) {
        scanf("%d",&n);
        for(int i=0; i<v.size(); i++) {
            k[i].clear();
        }
        for(int i=1; i<=n; i++) {
            scanf("%d",&a[i]);
        }
        for(int i=1; i<=n; i++) {
            char s[2];
            scanf("%s",s);
            if(s[0]=='F') {
                b[i]=1;//女1男0
            } else b[i]=0;
        }
        init(n+1);
        for(int i=1; i<=n; i++) {
            if(b[i]==1) {
                df(a[i],i);
            }
        }
        for(int i=1; i<=n; i++) {
            if(b[i]==0) {
                df2(a[i],i);
            }
        }
        for(int i=1; i<=n; i++) {

            if(b[i]==1) {
                add(0,i,1);
            } else add(i,n+1,1);
        }
        printf("%d
",n-maxflow(0,n+1));
    }
    return 0;
}