• 动态路由 RIP

    GNS3图标

    不同网段之间进行通信，中间有多个路由器的情况下，我们可以通过配置RIP动态路由来实现数据转发。

    实验拓扑

    RIP拓扑

    如图所示连接，地址规划如下：

    名称 接口 IP地址
    R1 f0/0 192.168.10.1/24
    R1 f0/1 192.168.20.1/30
    R2 f0/0 192.168.20.2/30
    R2 f0/1 192.168.30.1/30
    R3 f0/0 192.168.30.2/30
    R3 f0/1 192.168.40.1/24
    PC1 e0 192.168.10.2/24
    PC2 e0 192.168.40.2/24

    配置方法

    R1(config)#router rip
R1(config-router)#network 192.168.10.0
R1(config-router)#network 192.168.20.0
R1(config-router)#version 2
R1(config-router)#no auto-summary 
R1(config-router)#ex

    配置过程

    配置 IP 地址

    • R1
    R1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
R1(config)#int f0/0
R1(config-if)#ip add 192.168.10.1 255.255.255.0
R1(config-if)#no sh
R1(config-if)#ex
R1(config)#int f0/1
R1(config-if)#ip add 192.168.20.1 255.255.255.252
R1(config-if)#no sh
R1(config-if)#ex
R1(config)#do show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

C    192.168.10.0/24 is directly connected, FastEthernet0/0
     192.168.20.0/30 is subnetted, 1 subnets
C       192.168.20.0 is directly connected, FastEthernet0/1
    • R2
    R2#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
R2(config)#int f0/0
R2(config-if)#ip add 192.168.20.2 255.255.255.252
R2(config-if)#no sh
R2(config-if)#ex
R2(config)#int f0/1
R2(config-if)#ip add 192.168.30.1 255.255.255.252
R2(config-if)#no sh
R2(config-if)#ex
R2(config)#do show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     192.168.30.0/30 is subnetted, 1 subnets
C       192.168.30.0 is directly connected, FastEthernet0/1
     192.168.20.0/30 is subnetted, 1 subnets
C       192.168.20.0 is directly connected, FastEthernet0/0
    • R3
    R3#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
R3(config)#int f0/0
R3(config-if)#ip add 192.168.30.2 255.255.255.252
R3(config-if)#no sh
R3(config-if)#ex
R3(config)#int f0/1
R3(config-if)#ip add 192.168.40.1 255.255.255.0
R3(config-if)#no sh
R3(config-if)#ex
R3(config)#do show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     192.168.30.0/30 is subnetted, 1 subnets
C       192.168.30.0 is directly connected, FastEthernet0/0
C    192.168.40.0/24 is directly connected, FastEthernet0/1
    • PC1
    PC1> ip 192.168.10.2 192.168.10.1
Checking for duplicate address...
PC1 : 192.168.10.2 255.255.255.0 gateway 192.168.10.1
    • PC2
    PC2> ip 192.168.40.2 192.168.40.1
Checking for duplicate address...
PC1 : 192.168.40.2 255.255.255.0 gateway 192.168.40.1

    默认不可互通

    PC1> ping 192.168.40.2
*192.168.10.1 icmp_seq=1 ttl=255 time=18.978 ms (ICMP type:3, code:1, Destination host unreachable)
*192.168.10.1 icmp_seq=2 ttl=255 time=12.061 ms (ICMP type:3, code:1, Destination host unreachable)
*192.168.10.1 icmp_seq=3 ttl=255 time=6.137 ms (ICMP type:3, code:1, Destination host unreachable)
*192.168.10.1 icmp_seq=4 ttl=255 time=7.963 ms (ICMP type:3, code:1, Destination host unreachable)
*192.168.10.1 icmp_seq=5 ttl=255 time=7.970 ms (ICMP type:3, code:1, Destination host unreachable)

    PC2> ping 192.168.10.2
*192.168.40.1 icmp_seq=1 ttl=255 time=10.004 ms (ICMP type:3, code:1, Destination host unreachable)
*192.168.40.1 icmp_seq=2 ttl=255 time=6.786 ms (ICMP type:3, code:1, Destination host unreachable)
*192.168.40.1 icmp_seq=3 ttl=255 time=7.979 ms (ICMP type:3, code:1, Destination host unreachable)
*192.168.40.1 icmp_seq=4 ttl=255 time=10.064 ms (ICMP type:3, code:1, Destination host unreachable)
*192.168.40.1 icmp_seq=5 ttl=255 time=10.939 ms (ICMP type:3, code:1, Destination host unreachable)

    配置 RIP

    • R1
    R1(config)#router rip
R1(config-router)#network 192.168.10.0
R1(config-router)#network 192.168.20.0
R1(config-router)#version 2
R1(config-router)#no auto-summary 
R1(config-router)#ex
    • R2
    R2(config)#router rip
R2(config-router)#network 192.168.20.0
R2(config-router)#network 192.168.30.0
R2(config-router)#version 2
R2(config-router)#no auto-summary 
R2(config-router)#ex
    • R3
    R3(config)#router rip
R3(config-router)#network 192.168.30.0
R3(config-router)#network 192.168.40.0
R3(config-router)#version 2
R3(config-router)#no auto-summary 
R3(config-router)#ex

    查看路由表

    • R1
    R1(config)#do show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     192.168.30.0/30 is subnetted, 1 subnets
R       192.168.30.0 [120/1] via 192.168.20.2, 00:00:14, FastEthernet0/1
C    192.168.10.0/24 is directly connected, FastEthernet0/0
R    192.168.40.0/24 [120/2] via 192.168.20.2, 00:00:14, FastEthernet0/1
     192.168.20.0/30 is subnetted, 1 subnets
C       192.168.20.0 is directly connected, FastEthernet0/1
    • R2
    R2(config)#do show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     192.168.30.0/30 is subnetted, 1 subnets
C       192.168.30.0 is directly connected, FastEthernet0/1
R    192.168.10.0/24 [120/1] via 192.168.20.1, 00:00:07, FastEthernet0/0
R    192.168.40.0/24 [120/1] via 192.168.30.2, 00:00:22, FastEthernet0/1
     192.168.20.0/30 is subnetted, 1 subnets
C       192.168.20.0 is directly connected, FastEthernet0/0
    • R3
    R3(config)#do show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     192.168.30.0/30 is subnetted, 1 subnets
C       192.168.30.0 is directly connected, FastEthernet0/0
R    192.168.10.0/24 [120/2] via 192.168.30.1, 00:00:01, FastEthernet0/0
C    192.168.40.0/24 is directly connected, FastEthernet0/1
     192.168.20.0/30 is subnetted, 1 subnets
R       192.168.20.0 [120/1] via 192.168.30.1, 00:00:01, FastEthernet0/0

    验证结果

    PC1> ping 192.168.40.2
192.168.40.2 icmp_seq=1 timeout
192.168.40.2 icmp_seq=2 timeout
192.168.40.2 icmp_seq=3 timeout
192.168.40.2 icmp_seq=4 timeout
84 bytes from 192.168.40.2 icmp_seq=5 ttl=61 time=55.813 ms

PC1> ping 192.168.40.2
84 bytes from 192.168.40.2 icmp_seq=1 ttl=61 time=63.822 ms
84 bytes from 192.168.40.2 icmp_seq=2 ttl=61 time=54.815 ms
84 bytes from 192.168.40.2 icmp_seq=3 ttl=61 time=62.803 ms
84 bytes from 192.168.40.2 icmp_seq=4 ttl=61 time=56.948 ms
84 bytes from 192.168.40.2 icmp_seq=5 ttl=61 time=63.943 ms

    PC2> ping 192.168.10.2
84 bytes from 192.168.10.2 icmp_seq=1 ttl=61 time=64.749 ms
84 bytes from 192.168.10.2 icmp_seq=2 ttl=61 time=62.858 ms
84 bytes from 192.168.10.2 icmp_seq=3 ttl=61 time=54.841 ms
84 bytes from 192.168.10.2 icmp_seq=4 ttl=61 time=62.966 ms
84 bytes from 192.168.10.2 icmp_seq=5 ttl=61 time=54.853 ms
  • 相关阅读:
    漫谈计算机组成原理（九）定点数及定点数的运算
    漫谈计算机组成原理（八）原码、补码、反码
    漫谈计算机组成原理（七）I/O系统
    漫谈计算机组成原理（六）数据校验方法
    漫谈计算机组成原理（五）高速缓冲存储器
    漫谈计算机组成原理（四）主存
    致计算机专业准大一新生
    购物车原理以及实现
    Ajax发送PUT/DELETE请求时出现错误的原因及解决方案
    浅谈乱码原因及解决方案
  • 原文地址：https://www.cnblogs.com/llife/p/11632976.html
Copyright © 2020-2023  润新知