1 Scope of Document
This document describes vlan design on nodewrt2p
2 Requiremen
2.1 Function Requirement
Port0 be used for wan port, PORT1 PORT2 PORT3 PORT4 be used for lan port
2.2 Performance Requirement
NA
3 Hardware Overview
NA
4 Functional Description
4.1 Functional Block Diagram
NA
5 Porting
5.1 System configure
Reference: https://openwrt.org/docs/guide-user/network/vlan/switch_configuration
we can manual change target/linux/rampis/base-files/etc/board.d/02-network
Index: 02_network
===================================================================
--- 02_network (revision 9)
+++ 02_network (revision 10)
@@ -188,8 +188,8 @@
wrtnode2r)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
- ucidef_add_switch_vlan "switch0" "2" "4 6t"
+ ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
+ ucidef_add_switch_vlan "switch0" "2" "0 6t"
;;
ur-336un)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
so we have to two vlan network, one can be used to wan port , the other be used to lan port.