1.首先在服务器端安装snmp工具
yum -y install net-snmp-utils snmp-libs snmp-devel snmp
启动snmpd服务
systemctl start snmpd systemctl enable snmpd
2、更改配置文件。
vim /etc/snmp/snmpd.conf
com2sec notConfigUser default public group notConfigGroup v1 notConfigUser group notConfigGroup v2c notConfigUser view systemview included .1.3.6.1.2.1.1 view systemview included .1.3.6.1.2.1.25.1.1 view systemview included .1 access notConfigGroup "" any noauth exact all none none proc mountd proc ntalkd 4 proc sendmail 10 1 disk / 10000 load 12 14 14
重启snmpd服务
systemctl restart snmpd
3.检测与路由器的连通性（注意，这里必须要H3C ER3200G2开启snmp服务的网关路由器IP地址）
打开路由器snmp功能
snmpwalk -v 2c -c private 路由器wan口地址
1 SNMPv2-MIB::sysDescr.0 = STRING: H3C Product Version ERHMG2-MNW100-R1115^M 2 H3C ERHMG2^M 3 Copyright(c) 2014-2017 New H3C Technologies Co., Ltd. All rights reserved. 4 SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.25506.1.1707 5 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (543180300) 62 days, 20:50:03.00 6 SNMPv2-MIB::sysContact.0 = STRING: R&D Hangzhou, New H3C Technologies Co., Ltd. 7 SNMPv2-MIB::sysName.0 = STRING: H3C 8 SNMPv2-MIB::sysLocation.0 = STRING: Hangzhou, China 9 SNMPv2-MIB::sysServices.0 = INTEGER: 78 10 SNMPv2-MIB::sysORLastChange.0 = Timeticks: (47) 0:00:00.47 11 SNMPv2-MIB::sysORID.1 = OID: SNMPv2-MIB::snmpMIB 12 SNMPv2-MIB::sysORID.2 = OID: TCP-MIB::tcpMIB 13 SNMPv2-MIB::sysORID.3 = OID: IP-MIB::ip 14 SNMPv2-MIB::sysORID.4 = OID: UDP-MIB::udpMIB 15 SNMPv2-MIB::sysORID.5 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup 16 SNMPv2-MIB::sysORID.6 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance 17 SNMPv2-MIB::sysORID.7 = OID: SNMP-MPD-MIB::snmpMPDCompliance 18 SNMPv2-MIB::sysORID.8 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance 19 SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module for SNMPv2 entities 20 SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for managing TCP implementations 21 SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing IP and ICMP implementations 22 SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing UDP implementations 23 SNMPv2-MIB::sysORDescr.5 = STRING: View-based Access Control Model for SNMP. 24 SNMPv2-MIB::sysORDescr.6 = STRING: The SNMP Management Architecture MIB. 25 SNMPv2-MIB::sysORDescr.7 = STRING: The MIB for Message Processing and Dispatching. 26 SNMPv2-MIB::sysORDescr.8 = STRING: The management information definitions for the SNMP User-based Security Model. 27 SNMPv2-MIB::sysORUpTime.1 = Timeticks: (46) 0:00:00.46 28 SNMPv2-MIB::sysORUpTime.2 = Timeticks: (46) 0:00:00.46 29 SNMPv2-MIB::sysORUpTime.3 = Timeticks: (46) 0:00:00.46 30 SNMPv2-MIB::sysORUpTime.4 = Timeticks: (46) 0:00:00.46 31 SNMPv2-MIB::sysORUpTime.5 = Timeticks: (46) 0:00:00.46 32 SNMPv2-MIB::sysORUpTime.6 = Timeticks: (47) 0:00:00.47 33 SNMPv2-MIB::sysORUpTime.7 = Timeticks: (47) 0:00:00.47 34 SNMPv2-MIB::sysORUpTime.8 = Timeticks: (47) 0:00:00.47 35 IF-MIB::ifNumber.0 = INTEGER: 6 36 IF-MIB::ifIndex.16777217 = INTEGER: 16777217 37 IF-MIB::ifIndex.16777218 = INTEGER: 16777218 38 IF-MIB::ifIndex.50331652 = INTEGER: 50331652 39 IF-MIB::ifIndex.50331653 = INTEGER: 50331653 40 IF-MIB::ifIndex.50331654 = INTEGER: 50331654 41 IF-MIB::ifIndex.385875968 = INTEGER: 385875968 42 IF-MIB::ifDescr.16777217 = STRING: WAN1 43 IF-MIB::ifDescr.16777218 = STRING: WAN2 44 ...........................底下还有很多行
4、添加监控项
添加主机群组
添加主机
添加模板
添加成功，但是你会发现图形没有，我这里是已经添加完了
点击图形
下面这个图可能要等好一会，SNMP才会把信息传过来，所以耐性等它检测出来，然后选择我们要监控的WAN口，然后创建图形。
我这里添加图形，选择WAN1口的上传和下载监控项。
添加完成后预览，确认无误后，点击添加。
日常查看。
