PowerManagerService流程分析

一、PowerManagerService简介

　　PowerManagerService主要服务Android系统电源管理工作，这样讲比较笼统，就具体细节上大致可以认为PowerManagerService集中处理用户活动（如点击屏幕，按电源键等）、电量变化、用户设置（如在Setting中设置省电模式，飞行模式）、插拔充电器（无线冲，有线冲）等。当发生以上事件时，PowerManagerService都要进行各种状态的更新，以下把PMS作为PowerManagerService的简称

二、PowerManagerService启动流程

2.1、PMS启动

        // Power manager needs to be started early because other services need it.
        // Native daemons may be watching for it to be registered so it must be ready
        // to handle incoming binder calls immediately (including being able to verify
        // the permissions for those calls).
        mPowerManagerService = mSystemServiceManager.startService(PowerManagerService.class);
    .
    .
    .
        try {
            // TODO: use boot phase
            mPowerManagerService.systemReady(mActivityManagerService.getAppOpsService());
        } catch (Throwable e) {
            reportWtf("making Power Manager Service ready", e);
        }

2.2、SystemServiceManager.startService()

 1     public <T extends SystemService> T startService(Class<T> serviceClass) {
 2         final String name = serviceClass.getName();
 3         Slog.i(TAG, "Starting " + name);
 4 
 5         // Create the service.
 6         if (!SystemService.class.isAssignableFrom(serviceClass)) {
 7             throw new RuntimeException("Failed to create " + name
 8                     + ": service must extend " + SystemService.class.getName());
 9         }
10         final T service;
11         try {
12             Constructor<T> constructor = serviceClass.getConstructor(Context.class);
13             service = constructor.newInstance(mContext);
14         } catch (InstantiationException ex) {
15             throw new RuntimeException("Failed to create service " + name
16                     + ": service could not be instantiated", ex);
17         } catch (IllegalAccessException ex) {
18             throw new RuntimeException("Failed to create service " + name
19                     + ": service must have a public constructor with a Context argument", ex);
20         } catch (NoSuchMethodException ex) {
21             throw new RuntimeException("Failed to create service " + name
22                     + ": service must have a public constructor with a Context argument", ex);
23         } catch (InvocationTargetException ex) {
24             throw new RuntimeException("Failed to create service " + name
25                     + ": service constructor threw an exception", ex);
26         }
27 
28         // Register it.
29         mServices.add(service);
30 
31         // Start it.
32         try {
33             service.onStart();
34         } catch (RuntimeException ex) {
35             throw new RuntimeException("Failed to start service " + name
36                     + ": onStart threw an exception", ex);
37         }
38         return service;
39     }

在Android5.0以后SystemServer启动服务的方式发生了改变，在Android4.4以前SystemServer通过new方法创建服务的对象，并把服务注册到SystemManager中；Android5.0以后SystemServer通过SystemServiceManager.startService来启动服务，主要通过反射的方式获取服务的构造方法，并创建服务对象；最后调用服务重写的onStart（）方法。

说明：Android5.0以后所有服务都实现SystemService接口，这样方法服务的统一管理。

2.3 、PMS构造方法

 public PowerManagerService(Context context) {
        super(context);
        mContext = context;
        //启动一个线程，创建一个handler，handler发送的消息由该线程来处理
        mHandlerThread = new ServiceThread(TAG,
                Process.THREAD_PRIORITY_DISPLAY, false /*allowIo*/);
        mHandlerThread.start();
        mHandler = new PowerManagerHandler(mHandlerThread.getLooper());

        synchronized (mLock) {
            //创建两个suspendBlocker对象，获取suspendblocker防止cpu进去休眠
            mWakeLockSuspendBlocker = createSuspendBlockerLocked("PowerManagerService.WakeLocks");
            mDisplaySuspendBlocker = createSuspendBlockerLocked("PowerManagerService.Display");
            mDisplaySuspendBlocker.acquire();
            mHoldingDisplaySuspendBlocker = true;
            mHalAutoSuspendModeEnabled = false;
            mHalInteractiveModeEnabled = true;

            mWakefulness = WAKEFULNESS_AWAKE;
            //初始化电源相关设置，这些方法通过jni调动native方法
            nativeInit();
            nativeSetAutoSuspend(false);
            nativeSetInteractive(true);
            nativeSetFeature(POWER_FEATURE_DOUBLE_TAP_TO_WAKE, 0);
        }
    }

2.4、OnStart()方法

 1     @Override
 2     public void onStart() {
 3         //BinderService继承IPowerManager.Stub，其实就是PowerManager的服务端
 4         //这里其实就是把BinderService对象注册到ServiceManager中
 5         publishBinderService(Context.POWER_SERVICE, new BinderService());
 6         publishLocalService(PowerManagerInternal.class, new LocalService());
 7 
 8         //加入Watchdog监听
 9         Watchdog.getInstance().addMonitor(this);
10         Watchdog.getInstance().addThread(mHandler);
11     }

2.5、systemReady()方法

    public void systemReady(IAppOpsService appOps) {
        synchronized (mLock) {
            mSystemReady = true;
            mAppOps = appOps;
            mDreamManager = getLocalService(DreamManagerInternal.class);
            mDisplayManagerInternal = getLocalService(DisplayManagerInternal.class);
            mPolicy = getLocalService(WindowManagerPolicy.class);
            mBatteryManagerInternal = getLocalService(BatteryManagerInternal.class);

            PowerManager pm = (PowerManager) mContext.getSystemService(Context.POWER_SERVICE);
            //最大、最小、默认的屏幕亮超时时间
            mScreenBrightnessSettingMinimum = pm.getMinimumScreenBrightnessSetting();
            mScreenBrightnessSettingMaximum = pm.getMaximumScreenBrightnessSetting();
            mScreenBrightnessSettingDefault = pm.getDefaultScreenBrightnessSetting();
            //传感器相关，传感器检查到外部事件可以通过发送消息到mHandler的消息队列中处理
            SensorManager sensorManager = new SystemSensorManager(mContext, mHandler.getLooper());

            // The notifier runs on the system server's main looper so as not to interfere
            // with the animations and other critical functions of the power manager.
            mBatteryStats = BatteryStatsService.getService();
            
            //注意上面的注释，notifier运行在system server的主线程中，并且参数中传入了一个SuspendBlocker对象，应该发送通知的时候需要点亮屏幕
            mNotifier = new Notifier(Looper.getMainLooper(), mContext, mBatteryStats,
                    mAppOps, createSuspendBlockerLocked("PowerManagerService.Broadcasts"),
                    mPolicy);
            //无线充电器相关，参数中传入了sensorManager，并且参数中传入了一个SuspendBlocker对象，也是为了有外部事件发生时点亮屏幕
            mWirelessChargerDetector = new WirelessChargerDetector(sensorManager,
                    createSuspendBlockerLocked("PowerManagerService.WirelessChargerDetector"),
                    mHandler);
            //ContentObserver对象，用来监听电源相关设置的改变
            mSettingsObserver = new SettingsObserver(mHandler);

            mLightsManager = getLocalService(LightsManager.class);
            mAttentionLight = mLightsManager.getLight(LightsManager.LIGHT_ID_ATTENTION);

            // Initialize display power management.
            mDisplayManagerInternal.initPowerManagement(
                    mDisplayPowerCallbacks, mHandler, sensorManager);

            // Register for broadcasts from other components of the system.

            //注册一些广播监听器，如电量变化、用户切换(多用户模式，一般手机就是单用户)
            IntentFilter filter = new IntentFilter();
            filter.addAction(Intent.ACTION_BATTERY_CHANGED);
            filter.setPriority(IntentFilter.SYSTEM_HIGH_PRIORITY);
            mContext.registerReceiver(new BatteryReceiver(), filter, null, mHandler);

            filter = new IntentFilter();
            filter.addAction(Intent.ACTION_DREAMING_STARTED);
            filter.addAction(Intent.ACTION_DREAMING_STOPPED);
            mContext.registerReceiver(new DreamReceiver(), filter, null, mHandler);

            filter = new IntentFilter();
            filter.addAction(Intent.ACTION_USER_SWITCHED);
            mContext.registerReceiver(new UserSwitchedReceiver(), filter, null, mHandler);

            filter = new IntentFilter();
            filter.addAction(Intent.ACTION_DOCK_EVENT);
            mContext.registerReceiver(new DockReceiver(), filter, null, mHandler);

            // Register for settings changes.
            //监听系统中对电源的设置，如开启省电模式、默认休眠超时时间、屏幕亮度、充电是否亮屏等等
            final ContentResolver resolver = mContext.getContentResolver();
            resolver.registerContentObserver(Settings.Secure.getUriFor(
                    Settings.Secure.SCREENSAVER_ENABLED),
                    false, mSettingsObserver, UserHandle.USER_ALL);
            .......
            .......
            .......
            // Go.
            //读取资源文件中电源相关设置
            readConfigurationLocked();
            //更新设置中对电源的相关设置
            updateSettingsLocked();
            mDirty |= DIRTY_BATTERY_STATE;
            //更新电源状态，这里统一处理了所有的状态更新，该方法会被频繁调用
            updatePowerStateLocked();
        }
    }

2.6、updatePowerStateLocked()方法

 1     private void updatePowerStateLocked() {
 2         if (!mSystemReady || mDirty == 0) {
 3             return;
 4         }
 5         if (!Thread.holdsLock(mLock)) {
 6             Slog.wtf(TAG, "Power manager lock was not held when calling updatePowerStateLocked");
 7         }
 8 
 9         Trace.traceBegin(Trace.TRACE_TAG_POWER, "updatePowerState");
10         try {
11             // Phase 0: Basic state updates.
12             updateIsPoweredLocked(mDirty);
13             //设置DIRTY_STAY_ON标志位
14             updateStayOnLocked(mDirty);
15             updateScreenBrightnessBoostLocked(mDirty);
16 
17             // Phase 1: Update wakefulness.
18             // Loop because the wake lock and user activity computations are influenced
19             // by changes in wakefulness.
20             final long now = SystemClock.uptimeMillis();
21             int dirtyPhase2 = 0;
22             for (;;) {
23                 int dirtyPhase1 = mDirty;
24                 dirtyPhase2 |= dirtyPhase1;
25                 mDirty = 0;
26 
27                 updateWakeLockSummaryLocked(dirtyPhase1);
28                 updateUserActivitySummaryLocked(now, dirtyPhase1);
29                 if (!updateWakefulnessLocked(dirtyPhase1)) {
30                     break;
31                 }
32             }
33 
34             // Phase 2: Update display power state.
35             boolean displayBecameReady = updateDisplayPowerStateLocked(dirtyPhase2);
36 
37             // Phase 3: Update dream state (depends on display ready signal).
38             updateDreamLocked(dirtyPhase2, displayBecameReady);
39 
40             // Phase 4: Send notifications, if needed.
41             finishWakefulnessChangeIfNeededLocked();
42 
43             // Phase 5: Update suspend blocker.
44             // Because we might release the last suspend blocker here, we need to make sure
45             // we finished everything else first!
46             updateSuspendBlockerLocked();
47         } finally {
48             Trace.traceEnd(Trace.TRACE_TAG_POWER);
49         }
50     }

这里还是需要把代码贴出来比较好，可以直观看到updatePowerStateLocked()有6个阶段

第0阶段：基本状态更新：

2.6.1、updateIsPoweredLocked()

 1     private void updateIsPoweredLocked(int dirty) {
 2         if ((dirty & DIRTY_BATTERY_STATE) != 0) {
 3             final boolean wasPowered = mIsPowered;
 4             final int oldPlugType = mPlugType;
 5             final boolean oldLevelLow = mBatteryLevelLow;
 6             //获取充电标志位、充电器类型、电量百分比、低电量标志位
 7             mIsPowered = mBatteryManagerInternal.isPowered(BatteryManager.BATTERY_PLUGGED_ANY);
 8             mPlugType = mBatteryManagerInternal.getPlugType();
 9             mBatteryLevel = mBatteryManagerInternal.getBatteryLevel();
10             mBatteryLevelLow = mBatteryManagerInternal.getBatteryLevelLow();
11 
12             if (DEBUG_SPEW) {
13                 Slog.d(TAG, "updateIsPoweredLocked: wasPowered=" + wasPowered
14                         + ", mIsPowered=" + mIsPowered
15                         + ", oldPlugType=" + oldPlugType
16                         + ", mPlugType=" + mPlugType
17                         + ", mBatteryLevel=" + mBatteryLevel);
18             }
19             //充电器插拔时间发生、或者充电器类型更变则设置DIRTY_IS_POWERED标志位
20             if (wasPowered != mIsPowered || oldPlugType != mPlugType) {
21                 mDirty |= DIRTY_IS_POWERED;
22 
23                 // Update wireless dock detection state.
24                 //判断是否进行无线充电
25                 final boolean dockedOnWirelessCharger = mWirelessChargerDetector.update(
26                         mIsPowered, mPlugType, mBatteryLevel);
27 
28                 // Treat plugging and unplugging the devices as a user activity.
29                 // Users find it disconcerting when they plug or unplug the device
30                 // and it shuts off right away.
31                 // Some devices also wake the device when plugged or unplugged because
32                 // they don't have a charging LED.
33                 //上面的注释意思是说插拔充电器可以看做是用户行为，当插拔充电器时如果设备没有给出提示则用户会比较疑惑
34                 //特别是在设备没有充电指示灯的时，所以一般插拔充电器时会唤醒设备
35                 final long now = SystemClock.uptimeMillis();
36                 if (shouldWakeUpWhenPluggedOrUnpluggedLocked(wasPowered, oldPlugType,
37                         dockedOnWirelessCharger)) {
38                     //如果设置了插拔充电器时候需要唤醒设备，则在这里唤醒设备
39                     wakeUpNoUpdateLocked(now, "android.server.power:POWER", Process.SYSTEM_UID,
40                             mContext.getOpPackageName(), Process.SYSTEM_UID);
41                 }
42                 userActivityNoUpdateLocked(
43                         now, PowerManager.USER_ACTIVITY_EVENT_OTHER, 0, Process.SYSTEM_UID);
44 
45                 // Tell the notifier whether wireless charging has started so that
46                 // it can provide feedback to the user.
47                 //当无线充电器开始充电时给出提示音，在mNotifier中进行处理，播放一个ogg音频文件，我的三星设备是在/system/media/audio/ui/WirelessChargingStarted.ogg
48                 //该路径下有不少ogg文件，有兴趣的可以看看都是在什么情况下播的
49                 if (dockedOnWirelessCharger) {
50                     mNotifier.onWirelessChargingStarted();
51                 }
52             }
53             //如果电源插拔时间发生、或者是低电量标志位发生变化
54             if (wasPowered != mIsPowered || oldLevelLow != mBatteryLevelLow) {
55                 if (oldLevelLow != mBatteryLevelLow && !mBatteryLevelLow) {
56                     //当设备从低电量切换为非低电量，则设置自动打盹标志为false（因为已经不是低电量了）
57                     if (DEBUG_SPEW) {
58                         Slog.d(TAG, "updateIsPoweredLocked: resetting low power snooze");
59                     }
60                     mAutoLowPowerModeSnoozing = false;
61                 }
62                 //发送广播ACTION_POWER_SAVE_MODE_CHANGED，该广播在系统多处进行处理，在SystemUI中进行处理，如果低电量则给出提示
63                 updateLowPowerModeLocked();
64             }
65         }
66     }

2.6.2、updateScreenBrightnessBoostLocked()

 1     private void updateScreenBrightnessBoostLocked(int dirty) {
 2         if ((dirty & DIRTY_SCREEN_BRIGHTNESS_BOOST) != 0) {
 3             if (mScreenBrightnessBoostInProgress) {
 4                 final long now = SystemClock.uptimeMillis();
 5                 //删除屏幕亮度提升超时广播
 6                 mHandler.removeMessages(MSG_SCREEN_BRIGHTNESS_BOOST_TIMEOUT);
 7                 if (mLastScreenBrightnessBoostTime > mLastSleepTime) {
 8                     final long boostTimeout = mLastScreenBrightnessBoostTime +
 9                             SCREEN_BRIGHTNESS_BOOST_TIMEOUT;
10                     //如果超时还没有发生，则重新发送广播（定时广播)
11                     if (boostTimeout > now) {
12                         Message msg = mHandler.obtainMessage(MSG_SCREEN_BRIGHTNESS_BOOST_TIMEOUT);
13                         msg.setAsynchronous(true);
14                         mHandler.sendMessageAtTime(msg, boostTimeout);
15                         return;
16                     }
17                 }
18                 //运行到这里有2个条件
19                 //mLastScreenBrightnessBoostTime <= mLastSleepTime 说明还在睡眠中
20                 //boostTimeout <= now 说明屏幕提升超时发生
21                 mScreenBrightnessBoostInProgress = false;
22                 mNotifier.onScreenBrightnessBoostChanged();
23                 userActivityNoUpdateLocked(now,
24                         PowerManager.USER_ACTIVITY_EVENT_OTHER, 0, Process.SYSTEM_UID);
25             }
26         }
27     }

第1阶段：基本状态更新：

2.6.3、updateWakeLockSummaryLocked()

 1  @SuppressWarnings("deprecation")
 2     private void updateWakeLockSummaryLocked(int dirty) {
 3         if ((dirty & (DIRTY_WAKE_LOCKS | DIRTY_WAKEFULNESS)) != 0) {
 4             mWakeLockSummary = 0;
 5             //mWakeLocks保存了用户创建的所有wakelock
 6             final int numWakeLocks = mWakeLocks.size();
 7             for (int i = 0; i < numWakeLocks; i++) {
 8                 final WakeLock wakeLock = mWakeLocks.get(i);
 9                 switch (wakeLock.mFlags & PowerManager.WAKE_LOCK_LEVEL_MASK) {
10                     case PowerManager.PARTIAL_WAKE_LOCK:
11                         if (!wakeLock.mDisabled) {
12                             // We only respect this if the wake lock is not disabled.
13                             if(!wakeLock.mPackageName.equals("com.google.android.gms")){
14                                 mWakeLockSummary |= WAKE_LOCK_CPU;
15                             }
16                         }
17                         break;
18                     case PowerManager.FULL_WAKE_LOCK:
19                         mWakeLockSummary |= WAKE_LOCK_SCREEN_BRIGHT | WAKE_LOCK_BUTTON_BRIGHT;
20                         break;
21                     case PowerManager.SCREEN_BRIGHT_WAKE_LOCK:
22                         mWakeLockSummary |= WAKE_LOCK_SCREEN_BRIGHT;
23                         break;
24                     case PowerManager.SCREEN_DIM_WAKE_LOCK:
25                         mWakeLockSummary |= WAKE_LOCK_SCREEN_DIM;
26                         break;
27                     case PowerManager.PROXIMITY_SCREEN_OFF_WAKE_LOCK:
28                         mWakeLockSummary |= WAKE_LOCK_PROXIMITY_SCREEN_OFF;
29                         break;
30                     case PowerManager.DOZE_WAKE_LOCK:
31                         mWakeLockSummary |= WAKE_LOCK_DOZE;
32                         break;
33                     case PowerManager.DRAW_WAKE_LOCK:
34                         mWakeLockSummary |= WAKE_LOCK_DRAW;
35                         break;
36                 }
37             }
38             /**
39                 根据mWakefullness的状态取消某些锁的作用，意思就是说在系统处于特定状态时，有些锁是没有意义的，需要取消mWakeLockSummary中相应的标志位
40             */
41             // Cancel wake locks that make no sense based on the current state.
42             if (mWakefulness != WAKEFULNESS_DOZING) {
43                 mWakeLockSummary &= ~(WAKE_LOCK_DOZE | WAKE_LOCK_DRAW);
44             }
45             /**
46                 注意这里，当mWakefulless状态为asleep时，WAKE_LOCK_SCREEN_BRIGHT、WAKE_LOCK_SCREEN_DIM、WAKE_LOCK_BUTTON_BRIGHT、WAKE_LOCK_PROXIMITY_SCREEN_OFF
47                 这几种WakeLock的标志位都会被清空，标志位被清空作用就是类似系统释放了这些锁；仔细看唯独WAKE_LOCK_CPU标志位不变，说明PARTIAL_WAKE_LOCK在系统休眠的
48                 时候是不是会自动清空的，如果系统中存在PARTIAL_WAKE_LOCK，那么除非手动释放，不然系统将没办法进入休眠
49                 如果第三方的应用获取了PARTIAL_WAKE_LOCK，但是在系统休眠时又不是释放该怎么办呢?在后面调试经验中会给出答案。
50             */
51             if (mWakefulness == WAKEFULNESS_ASLEEP
52                     || (mWakeLockSummary & WAKE_LOCK_DOZE) != 0) {
53                 mWakeLockSummary &= ~(WAKE_LOCK_SCREEN_BRIGHT | WAKE_LOCK_SCREEN_DIM
54                         | WAKE_LOCK_BUTTON_BRIGHT);
55                 if (mWakefulness == WAKEFULNESS_ASLEEP) {
56                     mWakeLockSummary &= ~WAKE_LOCK_PROXIMITY_SCREEN_OFF;
57                 }
58             }
59             /**
60                 根据mWakefullness的状态增加某些锁的作用，就是说当系统处于特定状态时，需要某些锁来保持系统的状态，比如WAKEFULNESS_AWAKE状态肯定是要保持CPU运行的，所以
61                 需要添加WAKE_LOCK_CPU标志位以确保cpu处于运行状态
62             */
63             // Infer implied wake locks where necessary based on the current state.
64             if ((mWakeLockSummary & (WAKE_LOCK_SCREEN_BRIGHT | WAKE_LOCK_SCREEN_DIM)) != 0) {
65                 if (mWakefulness == WAKEFULNESS_AWAKE) {
66                     mWakeLockSummary |= WAKE_LOCK_CPU | WAKE_LOCK_STAY_AWAKE;
67                 } else if (mWakefulness == WAKEFULNESS_DREAMING) {
68                     mWakeLockSummary |= WAKE_LOCK_CPU;
69                 }
70             }
71             if ((mWakeLockSummary & WAKE_LOCK_DRAW) != 0) {
72                 mWakeLockSummary |= WAKE_LOCK_CPU;
73             }
74 
75             if (DEBUG_SPEW) {
76                 Slog.d(TAG, "updateWakeLockSummaryLocked: mWakefulness="
77                         + PowerManagerInternal.wakefulnessToString(mWakefulness)
78                         + ", mWakeLockSummary=0x" + Integer.toHexString(mWakeLockSummary));
79             }
80         }
81     }

2.6.4、updateUserActivitySummaryLocked()

　　这个方法只是更新mUserActivitySummary的值，内容比较简单，这里不再贴代码分析了，读者自行分析吧

2.6.5、updateWakefulnessLocked()

 1     private boolean updateWakefulnessLocked(int dirty) {
 2         boolean changed = false;
 3         if ((dirty & (DIRTY_WAKE_LOCKS | DIRTY_USER_ACTIVITY | DIRTY_BOOT_COMPLETED
 4                 | DIRTY_WAKEFULNESS | DIRTY_STAY_ON | DIRTY_PROXIMITY_POSITIVE
 5                 | DIRTY_DOCK_STATE)) != 0) {
 6                 //注意这里会改变mWakefullness的值，但是mWakefullness的值会影响锁的有效性，因此阶段2的处理在一个for循环中
 7             if (mWakefulness == WAKEFULNESS_AWAKE && isItBedTimeYetLocked()) {
 8                 if (DEBUG_SPEW) {
 9                     Slog.d(TAG, "updateWakefulnessLocked: Bed time...");
10                 }
11                 final long time = SystemClock.uptimeMillis();
12                 if (shouldNapAtBedTimeLocked()) {
13                     changed = napNoUpdateLocked(time, Process.SYSTEM_UID);
14                 } else {
15                     changed = goToSleepNoUpdateLocked(time,
16                             PowerManager.GO_TO_SLEEP_REASON_TIMEOUT, 0, Process.SYSTEM_UID);
17                 }
18             }
19         }
20         return changed;
21     }

第2、3、4、5代码比较简单，这里就不分析了，读者自行分析，下面我们来关注第6阶段

阶段6：

2.6.6、updateSuspendBlockerLocked()

 1     private void updateSuspendBlockerLocked() {
 2         final boolean needWakeLockSuspendBlocker = ((mWakeLockSummary & WAKE_LOCK_CPU) != 0);
 3         final boolean needDisplaySuspendBlocker = needDisplaySuspendBlockerLocked();
 4         final boolean autoSuspend = !needDisplaySuspendBlocker;
 5         final boolean interactive = mDisplayPowerRequest.isBrightOrDim();
 6 
 7         // Disable auto-suspend if needed.
 8         // FIXME We should consider just leaving auto-suspend enabled forever since
 9         // we already hold the necessary wakelocks.
10         if (!autoSuspend && mDecoupleHalAutoSuspendModeFromDisplayConfig) {
11             setHalAutoSuspendModeLocked(false);
12         }
13         /**
14             从上面我们知道有WAKE_LOCK_CPU标志的话就获取一个suspendblocker，这才是正真会阻止cpu待机的东西
15         */
16         // First acquire suspend blockers if needed.
17         if (needWakeLockSuspendBlocker && !mHoldingWakeLockSuspendBlocker) {
18             mWakeLockSuspendBlocker.acquire();
19             mHoldingWakeLockSuspendBlocker = true;
20         }
21         /*
22             只有屏幕亮的时候才需要display suspendblocker，当屏幕灭或者doz的时候这里不会获取suspendblocker
23         */
24         if (needDisplaySuspendBlocker && !mHoldingDisplaySuspendBlocker) {
25             mDisplaySuspendBlocker.acquire();
26             mHoldingDisplaySuspendBlocker = true;
27         }
28 
29         /*
30             设置设备为可交互模式
31         */
32         // Inform the power HAL about interactive mode.
33         // Although we could set interactive strictly based on the wakefulness
34         // as reported by isInteractive(), it is actually more desirable to track
35         // the display policy state instead so that the interactive state observed
36         // by the HAL more accurately tracks transitions between AWAKE and DOZING.
37         // Refer to getDesiredScreenPolicyLocked() for details.
38         if (mDecoupleHalInteractiveModeFromDisplayConfig) {
39             // When becoming non-interactive, we want to defer sending this signal
40             // until the display is actually ready so that all transitions have
41             // completed.  This is probably a good sign that things have gotten
42             // too tangled over here...
43             if (interactive || mDisplayReady) {
44                 setHalInteractiveModeLocked(interactive);
45             }
46         }
47         /*
48             注意这里needWakeLockSuspendBlocker为ture的话是不会释放mWakeLockSuspendBlocker的，所以系统会无法待机
49             这样就能解释的通为什么PARTIAL_WAKE_LOCK级别的锁会导致不能待机了:
50             app-->newWakeLock(PowerManager.PARTIAL_WAKE_LOCK,flag) --->PMS设置mWakeLockSummary的WAKE_LOCK_CPU标志位
51             --->PMS 因为WAKE_LOCK_CPU标志位存在mWakeLockSuspendBlocker.acquire()-->待机失败
52         */
53         // Then release suspend blockers if needed.
54         if (!needWakeLockSuspendBlocker && mHoldingWakeLockSuspendBlocker) {
55             mWakeLockSuspendBlocker.release();
56             mHoldingWakeLockSuspendBlocker = false;
57         }
58         if (!needDisplaySuspendBlocker && mHoldingDisplaySuspendBlocker) {
59             mDisplaySuspendBlocker.release();
60             mHoldingDisplaySuspendBlocker = false;
61         }
62 
63         //如果条件成立的话设置自动待机模式
64         // Enable auto-suspend if needed.
65         if (autoSuspend && mDecoupleHalAutoSuspendModeFromDisplayConfig) {
66             setHalAutoSuspendModeLocked(true);
67         }
68     }

三、PowerManager用法

PowerManager的用法很简单，我们主要看下PowerManager创建锁这部分：

newWakeLock(int levelAndFlags, String tag)

levelAndFlags：就是上边表格中的几个flag，可以看到不同的flag对系统的影响并不一样

PARTIAL_WAKE_LOCK：保持cpu运转状态，屏幕键盘灭，按power键该锁不会被系统自动释放，所以系统无法进去待机休眠

SCREEN_DIM_WAKE_LOCK：保持cpu处于运行状态，屏幕微亮、键盘灭，但是按power键进入待机休眠时会自动释放

SCREEN_BRIGHT_WAKE_LOCK：保持cpu处于运行状态，屏幕亮、键盘灭，但是按power键进入待机休眠时会自动释放

FULL_WAKE_LOCK：保持cpu处于运行状态，屏幕、键盘亮，但是按power键进入待机休眠时会自动释放

注意：官方的文档介绍尽量不要使用WAKE_LOCK，用FLAG_KEEP_SCREEN_ON标志位代替WAKE_LOCK，用如下方式：

1 getWindow().addFlags(WindowManager.LayoutParams.FLAG_KEEP_SCREEN_ON);

当然该方法只是针对当前Activity，如果要整个应用都保持屏幕亮，则可以写了BaseActivity并设置该标志位，其他Activity继承BaseActivity即可。

四、PowerManagerService调试

PMS中最容易出现的问题就是待机待不下去，原因就是上面说的PARTIAL_WAKE_LOCK级别的锁没有释放，按道理说这种锁的释放应该由应用自身来作的，但是一些第三方的应用（Google的一些应用就很多这种锁）没有释放的话该怎么办呢？

下面介绍两种办法：

1、强制不给设置WAKE_LOCK_CPU标志位

 1     private void updateWakeLockSummaryLocked(int dirty) {
 2         if ((dirty & (DIRTY_WAKE_LOCKS | DIRTY_WAKEFULNESS)) != 0) {
 3             mWakeLockSummary = 0;
 4             //mWakeLocks保存了用户创建的所有wakelock
 5             final int numWakeLocks = mWakeLocks.size();
 6             for (int i = 0; i < numWakeLocks; i++) {
 7                 final WakeLock wakeLock = mWakeLocks.get(i);
 8                 switch (wakeLock.mFlags & PowerManager.WAKE_LOCK_LEVEL_MASK) {
 9                     case PowerManager.PARTIAL_WAKE_LOCK:
10                         if (!wakeLock.mDisabled) {
11                             // We only respect this if the wake lock is not disabled.
12                             //com.google.android.gms获取了PARTIAL_WAKE_LOCK，但是不给设置WAKE_LOCK_CPU标志位
13                             if(!wakeLock.mPackageName.equals("com.google.android.gms")){
14                                 mWakeLockSummary |= WAKE_LOCK_CPU;
15                             }else{
16                                 mWakeLockSummary |= WAKE_LOCK_SCREEN_BRIGHT;
17                             }
18                         }

2、让系统自动清楚WAKE_LOCK_CPU标志

1             if (mWakefulness == WAKEFULNESS_ASLEEP
2                     || (mWakeLockSummary & WAKE_LOCK_DOZE) != 0) {
3                 mWakeLockSummary &= ~(WAKE_LOCK_SCREEN_BRIGHT | WAKE_LOCK_SCREEN_DIM
4                         | WAKE_LOCK_BUTTON_BRIGHT |WAKE_LOCK_CPU); //待机休眠时清楚 WAKE_LOCK_CPU
5                 if (mWakefulness == WAKEFULNESS_ASLEEP) {
6                     mWakeLockSummary &= ~WAKE_LOCK_PROXIMITY_SCREEN_OFF;
7                 }
8             }

dumpsysy power可打印PMS中锁信息：

五、总结

总的来说PMS的流程并不复杂，不过需要静下心来分析代码仍然不是一件很容易的事情，本人水平有限，有不足之处请指出，后续我会持续更新修改。

放弃很容易，但是坚持真的很酷，静享此刻，强风吹拂

相关阅读:
android 从相册获取图片
 python 自定义函数
 《设计模式》-总复习(三)
《设计模式》-总复习（二）
《设计模式》-总复习（一）
《设计模式》-策略模式
 《设计模式》-模板模式
 《设计模式》-访问者模式
 《设计模式》-观察者模式
 《设计模式》-命令模式
原文地址：https://www.cnblogs.com/joker8/p/7087321.html