Ubuntu下运行：
timedatectl set-local-rtc 1 --adjust-system-clock
或者Windows下运行：
Reg add HKLMSYSTEMCurrentControlSetControlTimeZoneInformation /v RealTimeIsUniversal /t REG_DWORD /d 1
参考如下：
timedatectl --help 的执行结果如下：
timedatectl [OPTIONS...] COMMAND ...
Query or change system time and date settings.
-h --help Show this help message
--version Show package version
--no-pager Do not pipe output into a pager
--no-ask-password Do not prompt for password
-H --host=[USER@]HOST Operate on remote host
-M --machine=CONTAINER Operate on local container
--adjust-system-clock Adjust system clock when changing local RTC mode
Commands:
status Show current time settings
set-time TIME Set system time
set-timezone ZONE Set system time zone
list-timezones Show known time zones
set-local-rtc BOOL Control whether RTC is in local time
set-ntp BOOL Enable or disable network time synchronization
更详细的参数解释：
能够识别的命令行选项如下： --no-ask-password 在执行特权操作时 不向用户索要密码。 --adjust-system-clock 当使用 set-local-rtc 命令时， 若使用了此选项， 则表示根据RTC时间来更新系统时钟。 若未使用此选项， 则表示根据系统时钟来更新RTC时间。 --monitor 与 timesync-status 命令一起使用， 表示监视 systemd-timesyncd.service(8) 的状态并不断刷新输出。可以使用 Ctrl+C 终止监视。 -a, --all 显示全部的 systemd-timesyncd.service(8) 属性，无论这些属性是否已设置。 -p, --property= 仅显示指定的 systemd-timesyncd.service(8) 属性。若未指定任何属性则显示全部已设置的属性。 参数必须是一个例如 "ServerName" 这样的属性名称。 可以多次使用此选项，以显示多个属性。 --value 当使用 show-timesync 命令显示属性时， 仅显示属性的值(不显示"="与属性名称)。 -H, --host= 操作指定的远程主机。可以仅指定一个主机名(hostname)， 也可以使用 "username@hostname" 格式。 hostname 后面还可以加上 SSH监听端口(以冒号":"分隔)与容器名(以正斜线"/"分隔)， 也就是形如 "hostname:port/container" 的格式， 以表示直接连接到指定主机的指定容器内。 操作将通过SSH协议进行，以确保安全。 可以通过 machinectl -H HOST 命令列出远程主机上的所有容器名称。IPv6地址必须放在方括号([])内。 -M, --machine= 在本地容器内执行操作。 必须明确指定容器的名称。 -h, --help 显示简短的帮助信息并退出。 --version 显示简短的版本信息并退出。 --no-pager 不将程序的输出内容管道(pipe)给分页程序。
参考：http://www.jinbuguo.com/systemd/timedatectl.html
The following options are understood:
--no-ask-password
Do not query the user for authentication for privileged operations.
--adjust-system-clock
If set-local-rtc is invoked and this option is passed, the system clock is
synchronized from the RTC again, taking the new setting into account. Otherwise, the
RTC is synchronized from the system clock.
-H, --host=
Execute the operation remotely. Specify a hostname, or a username and hostname
separated by "@", to connect to. The hostname may optionally be suffixed by a
container name, separated by ":", which connects directly to a specific container on
the specified host. This will use SSH to talk to the remote machine manager instance.
Container names may be enumerated with machinectl -H HOST.
-M, --machine=
Execute operation on a local container. Specify a container name to connect to.
-h, --help
Print a short help text and exit.
--version
Print a short version string and exit.
--no-pager
Do not pipe output into a pager.
The following commands are understood:
status
Show current settings of the system clock and RTC, including whether network time
synchronization is on. Note that whether network time synchronization is on simply
reflects whether the systemd-timesyncd.service unit is enabled. Even if this command
shows the status as off, a different service might still synchronize the clock with
the network.
set-time [TIME]
Set the system clock to the specified time. This will also update the RTC time
accordingly. The time may be specified in the format "2012-10-30 18:17:16".
set-timezone [TIMEZONE]
Set the system time zone to the specified value. Available timezones can be listed
with list-timezones. If the RTC is configured to be in the local time, this will also
update the RTC time. This call will alter the /etc/localtime symlink. See localtime(5)
for more information.
list-timezones
List available time zones, one per line. Entries from the list can be set as the
system timezone with set-timezone.
set-local-rtc [BOOL]
Takes a boolean argument. If "0", the system is configured to maintain the RTC in
universal time. If "1", it will maintain the RTC in local time instead. Note that
maintaining the RTC in the local timezone is not fully supported and will create
various problems with time zone changes and daylight saving adjustments. If at all
possible, keep the RTC in UTC mode. Note that invoking this will also synchronize the
RTC from the system clock, unless --adjust-system-clock is passed (see above). This
command will change the 3rd line of /etc/adjtime, as documented in hwclock(8).
set-ntp [BOOL]
Takes a boolean argument. Controls whether network time synchronization is active and
enabled (if available). This enables and starts, or disables and stops the
systemd-timesyncd.service unit. It does not affect the state of any other, unrelated
network time synchronization services that might be installed on the system. This
command is hence mostly equivalent to: systemctl enable --now
systemd-timesyncd.service and systemctl disable --now systemd-timesyncd.service, but
is protected by a different access policy.
Note that even if time synchronization is turned off with this command, another
unrelated system service might still synchronize the clock with the network. Also note
that, strictly speaking, systemd-timesyncd.service does more than just network time
synchronization, as it ensures a monotonic clock on systems without RTC even if no
network is available. See systemd-timesyncd.service(8) for details about this.