• [转]RHEL6 虚拟机克隆网络问题解决方法


    原文地址:http://bbs.chinaunix.net/thread-1918368-1-1.html

    环境:Virtualbox+RHEL 6 x64
    用VirtualBox的vboxmanager克隆的虚拟机,操作系统RHEL6,启动后发现网卡不能用了。重启网络服务,报以下错误:
    Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization. [FAILED]

    在RHEL5里也发生类似事情,因为复制虚拟机MAC会重新生成,但是操作系统的MAC却写在ifcfg-ethx里,造成了不一致,所以不能启动网络接口,在RHEL5里可以使用kudzu或者注释网卡配置文件的MAC字段来解决这个问题。但是在RHEL6里,kudzu已经被hal服务取代了。虽然lspci能够正常认到网卡,但是却无法使用/etc/init.d/network restart来启动服务。尝试注释ifcfg-eth0的MAC字段,还是报错。查看了下udev的规则,发现了问题的所在。

    [root@Oracle ~]# cat /etc/udev/rules.d/70-persistent-net.rules
    # This file was automatically generated by the /lib/udev/write_net_rules
    # program, run by the persistent-net-generator.rules rules file.
    #
    # You can modify it, as long as you keep each rule on a single
    # line, and change only the value of the NAME= key.

    # net device () (custom name provided by external tool)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:16:31:11", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

    # net device ()
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:32:66:63", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
    [root@Oracle ~]#

    原来UDEV这里把克隆前的MAC当成了当前虚拟机的eth0 MAC,而重新生成的08:00:27:32:66:63是eth1的MAC。

    解决这个问题,只要删除旧的UDEV配置,修改为:
    [root@Oracle ~]# cat /etc/udev/rules.d/70-persistent-net.rules
    # This file was automatically generated by the /lib/udev/write_net_rules
    # program, run by the persistent-net-generator.rules rules file.
    #
    # You can modify it, as long as you keep each rule on a single
    # line, and change only the value of the NAME= key.

    # net device () (custom name provided by external tool)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:32:66:63", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

    重启network服务,一切OK
    [root@Oracle ~]# /etc/init.d/network restart
    Shutting down interface eth0: [ OK ]
    Shutting down loopback interface: [ OK ]
    Bringing up loopback interface: [ OK ]
    Bringing up interface eth0: [ OK ]
    [root@Oracle ~]# ifconfig eth0
    eth0 Link encap:Ethernet HWaddr 08:00:27:32:66:63
    inet addr:172.16.100.3 Bcast:172.16.100.255 Mask:255.255.255.0
    inet6 addr: fe80::a00:27ff:fe32:6663/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:206 errors:0 dropped:0 overruns:0 frame:0
    TX packets:203 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:21157 (20.6 KiB) TX bytes:24515 (23.9 KiB)

  • 相关阅读:
    总结
    webview细节注意
    对图片的处理
    介绍并提高app中WebView的性能
    工作中新接触的问题
    iOS环信
    Framework静态库制作方法
    多线程GCD
    iOS开发之地图与定位
    ARC内存管理机制详解
  • 原文地址:https://www.cnblogs.com/imoing/p/3105863.html
Copyright © 2020-2023  润新知