ltp-ddt nand_ecc_tests

NAND_S_FUNC_ECC_2K_BCH8_8ERRS_NO_OOB_ERR source "common.sh"; nandecc_tests.sh -r "0:0:0xFF"~"1:1:0xFF"~"2:2:0xFF"~"3:3:0xFF"

 

nandecc_tests.sh -r "0:0:0xFF"~"1:1:0xFF"~"2:2:0xFF"~"3:3:0xFF"

nandecc_tests.sh:

usage()
{
cat <<-EOF >&2
    usage: ./${0##*/} [-n dev_node] [-r rules]
    -n dev_node: optional; if not provided, choose one with the biggest size
    -r rules: the rules used to inject error bits
    -t test_type: optional; by default is positive test. you could pass 'negative'
    -e test empty sectors
    -h Help         print this usage
EOF
exit 0
}

 

########################### TEST LOGIC ###############################

# create a random test file

testfile="testfile.bin"
do_cmd dd if=/dev/urandom of="$testfile" bs=1 count=$pagesize

 

# write to nand

do_cmd flash_erase -q "$dev_node" 0 0

test_print_trc "Write testfile to nand..."
do_cmd nandwrite -p "$dev_node" "$testfile"

 

do_cmd nanddump -p -l "$pagesize" "$dev_node"

orig_nanddump="$TMPDIR/testfile_nanddump.original"
orig_nanddump_w_oob="$TMPDIR/testfile_nanddump_w_oob.original"

do_cmd nanddump -l "$pagesize" -f "${orig_nanddump}" "$dev_node" #-l len -f file
do_cmd nanddump -l "$pagesize" -o -f "$orig_nanddump_w_oob" "$dev_node" #-o --oob Dump OOB data

 

# modify the nanddump file
test_print_trc "Modifying nand dump file to prepare for ecc test"
corrupted_nanddump="$TMPDIR/testfile_nanddump.corrupted"
modify_nanddump_file "$orig_nanddump_w_oob" "$corrupted_nanddump" "$rules" #associate with rules

 

# write the corrupted nand file back
test_print_trc "Write the corrupted nanddump file back..."
do_cmd flash_erase -q "$dev_node" 0 0
do_cmd nandwrite -n -o "$dev_node" "$corrupted_nanddump" #  -o, --oob               Input contains oob data

 

# Display the errors being injected
hexdump_original_w_oob="$TMPDIR/original_w_oob"
hexdump_corrupted_w_oob="$TMPDIR/corrupted_w_oob"
do_cmd "hexdump -C $orig_nanddump_w_oob > "$hexdump_original_w_oob" "
do_cmd "hexdump -C $corrupted_nanddump > "$hexdump_corrupted_w_oob" "
test_print_trc "The below are the errors being injected in the nand page"
test_print_trc "diff "$hexdump_original_w_oob" "$hexdump_corrupted_w_oob" "
diff "$hexdump_original_w_oob" "$hexdump_corrupted_w_oob"

sleep 5

 

# Verify steps
test_print_trc "Dumpping nand..."
corrected_nanddump="$TMPDIR/testfile_nanddump.corrected"
do_cmd "nanddump -l "$pagesize" -f "$corrected_nanddump" "$dev_node" " > $TMPDIR/nanddump_msg 2>&1
cat $TMPDIR/nanddump_msg
cat $TMPDIR/nanddump_msg |grep "uncorrectable bitflip(s)" && result=1 || result=0
echo "result is $result"

 

if [ $? -ne 0 ] || [ $result -eq 1 ]; then
  if [ $type = 'negative' ]; then
    test_print_trc "The bit error(s) are not corrected as expected, checking if dut is ok..."
    #check if dut is still stable
    do_cmd "cat /proc/mtd"
    do_cmd "time dd if=/dev/urandom of=$dev_node bs=1M count=10"  
    do_cmd flash_erase -q "$dev_node" 0 0
    exit 0
  else
    test_print_trc "Nand dump from uncorrected page ..."
    uncorrected_nanddump="$TMPDIR/testfile_nanddump.uncorrected"
    do_cmd "nanddump -n -o -l "$pagesize" -f "$uncorrected_nanddump" "$dev_node" "
    do_cmd "hexdump -C "$uncorrected_nanddump" "
    do_cmd flash_erase -q "$dev_node" 0 0
    die "Nand ECC Test failed. Not all errors are corrected"
  fi
else
  test_print_trc "Nand ECC Test Pass"
  do_cmd flash_erase -q "$dev_node" 0 0
  exit 0
fi

 

modify_nanddump_file()

# Modify the nanddump file to flip bits based on $rules
# Input
#   $1: input file
#   $2: rules like "<sector#>:byte_offset:mask"~"<oob>:byte_offset:mask"
#       sector, byte_offset are decimal. 'mask' could be decimal or hex
#       byte_offset starts from 0
# Output
#   modified file
modify_nanddump_file()
{
  inputfile=$1
  outputfile=$2
  rules=$3

  local filesize=`get_filesize $1`
  cp $inputfile $outputfile

  ORIG_IFS=$IFS
  IFS="~"
  for rule in $rules
  do
    # rule is like "sector#:byte_offset:mask" or "oob:offset:mask"
    sector=`echo "$rule" | cut -d":" -f1 | tr [:upper:] [:lower:]`
    byte_offset=`echo "$rule" | cut -d":" -f2`
    mask=`echo "$rule" | cut -d":" -f3`
    if [ $sector = 'oob' ]; then
      offset=$(( $pagesize + $byte_offset ))
      if [ $offset -ge $filesize ]; then
        die "Offset to $inputfile should not be bigger than the filesize"
      fi
    else
      offset=$(( $sector * $sector_size + $byte_offset ))
      if [ $offset -ge $pagesize ];then
        die "Offset to $inputfile for non-oob data should not bigger than pagesize"
      fi
    fi

    # get the original byte and modify it
    orig_byte=`hexdump_onebyte $inputfile $offset`
    mod_byte_dec=$(( 0x$orig_byte ^ $mask )) #xor mask
    mod_byte=`echo "obase=16; $mod_byte_dec" |bc`

    # write the modified byte to replace the original one
    replace_onebyte $outputfile $offset $mod_byte
    
  done
  IFS=$ORIG_IFS

}