二进制安装k8s 1.20
一、集群环境说明
| 主机名 |
IP地址 |
说明 |
| k8s-master01 |
192.168.1.100 |
master节点 |
| k8s-master02 |
192.168.1.101 |
master节点 |
| k8s-master03 |
192.168.1.102 |
master节点 |
| k8s-master-lb（在master节点） |
192.168.1.246 |
keepalived虚拟IP |
| k8s-node01 |
192.168.1.103 |
worker节点 |
| k8s-node02 |
192.168.1.104 |
worker节点 |
| 配置信息 |
备注 |
| 系统版本 |
CentOS 7.9 |
| Docker版本 |
19.03.x |
| Pod网段 |
172.168.0.0/12 |
| Service网段 |
10.96.0.0/12 |
注意：
VIP（虚拟IP）不要和公司内网IP重复，首先去ping一下，不通才可用。VIP需要和主机在同一个局域网内！
二、基础环境配置（以下操作所有节点都得执行）
2.1、配置hosts解析
cat >> /etc/hosts << EFO
192.168.1.100 k8s-master01
192.168.1.101 k8s-master02
192.168.1.102 k8s-master03
192.168.1.246 k8s-master-lb # 如果不是高可用集群，该IP为Master01的IP
192.168.1.103 k8s-node01
192.168.1.104 k8s-node02
EFO
2.2、更换yum源码
curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
sed -i -e '/mirrors.cloud.aliyuncs.com/d' -e '/mirrors.aliyuncs.com/d' /etc/yum.repos.d/CentOS-Base.repo
2.3、安装常用工具
yum install wget jq psmisc vim net-tools telnet yum-utils device-mapper-persistent-data lvm2 git lrzsz -y
2.4、关闭防火墙、selinux、dnsmasq、swap
systemctl disable --now firewalld
systemctl disable --now dnsmasq
systemctl disable --now NetworkManager
setenforce 0
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinux
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config
# 关闭swap分区
swapoff -a && sysctl -w vm.swappiness=0
sed -ri '/^[^#]*swap/s@^@#@' /etc/fstab
2.5、时间同步配置
# 安装ntpdate
rpm -ivh http://mirrors.wlnmp.com/centos/wlnmp-release-centos.noarch.rpm
yum install ntpdate -y
# 更改时区
ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
# 设置定时任务同步时间
echo 'Asia/Shanghai' >/etc/timezone
ntpdate time2.aliyun.com
# 加入到crontab
crontab -e
*/5 * * * * ntpdate time2.aliyun.com
2.6、优化Linux
ulimit -SHn 65535
vim /etc/security/limits.conf
# 末尾添加如下内容
* soft nofile 655360
* hard nofile 131072
* soft nproc 655350
* hard nproc 655350
* soft memlock unlimited
* hard memlock unlimited
# 然后重启Linux
reboot
2.7、所有节点升级系统并重启，此处升级没有升级内核，下节会单独升级内核：
# CentOS7需要升级，CentOS8可以按需升级系统
yum update -y --exclude=kernel* && reboot
三、内核升级
3.1、配置免密登录（Master01上）
Master01节点免密钥登录其他节点，安装过程中生成配置文件和证书均在Master01上操作，集群管理也在Master01上操作，阿里云或者AWS上需要单独一台kubectl服务器。密钥配置如下：
# 一直回车就行
ssh-keygen -t rsa
for i in k8s-master01 k8s-master02 k8s-master03 k8s-node01 k8s-node02;do ssh-copy-id -i .ssh/id_rsa.pub $i;done
3.2、下载安装所有的源码文件：（Master01上）
cd /root/ ; git clone https://github.com/dotbalo/k8s-ha-install.git
3.3、下载升级所需安装包（Master01上）
CentOS7 需要升级内核至4.18+，本地升级的版本为4.19
# 在master01节点下载内核
cd /root
wget http://193.49.22.109/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-devel-4.19.12-1.el7.elrepo.x86_64.rpm
wget http://193.49.22.109/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-4.19.12-1.el7.elrepo.x86_64.rpm
# 从master01节点传到其他节点：
for i in k8s-master02 k8s-master03 k8s-node01 k8s-node02;do scp kernel-ml-4.19.12-1.el7.elrepo.x86_64.rpm kernel-ml-devel-4.19.12-1.el7.elrepo.x86_64.rpm $i:/root/ ; done
3.4、内核升级（所有节点）
# 安装内核
cd /root && yum localinstall -y kernel-ml*
grub2-set-default 0 && grub2-mkconfig -o /etc/grub2.cfg
grubby --args="user_namespace.enable=1" --update-kernel="$(grubby --default-kernel)"
# 检查默认内核是不是4.19
grubby --default-kernel /boot/vmlinuz-4.19.12-1.el7.elrepo.x86_64
# 所有节点重启，然后检查内核是不是4.19
reboot
[root@k8s-node02 ~]# uname -a
Linux k8s-node02 4.19.12-1.el7.elrepo.x86_64 #1 SMP Fri Dec 21 11:06:36 EST 2018 x86_64 x86_64 x86_64 GNU/Linux
3.5、安装ipvsadm（所有节点）
yum install ipvsadm ipset sysstat conntrack libseccomp -y
所有节点配置ipvs模块，在内核4.19+版本nf_conntrack_ipv4已经改为nf_conntrack， 4.18以下使用nf_conntrack_ipv4即可：
# 加入以下内容
cat > /etc/modules-load.d/ipvs.conf << EFO
ip_vs
ip_vs_lc
ip_vs_wlc
ip_vs_rr
ip_vs_wrr
ip_vs_lblc
ip_vs_lblcr
ip_vs_dh
ip_vs_sh
ip_vs_fo
ip_vs_nq
ip_vs_sed
ip_vs_ftp
ip_vs_sh
nf_conntrack # 4.18 改成这个nf_conntrack_ipv4
ip_tables
ip_set
xt_set
ipt_set
ipt_rpfilter
ipt_REJECT
ipip
EFO
# 然后执行
systemctl enable --now systemd-modules-load.service
3.6、开启一些k8s集群中必须的内核参数，配置k8s内核（所有节点）
cat <<EOF > /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
fs.may_detach_mounts = 1
vm.overcommit_memory=1
vm.panic_on_oom=0
fs.inotify.max_user_watches=89100
fs.file-max=52706963
fs.nr_open=52706963
net.netfilter.nf_conntrack_max=2310720
net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.tcp_keepalive_intvl =15
net.ipv4.tcp_max_tw_buckets = 36000
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_max_orphans = 327680
net.ipv4.tcp_orphan_retries = 3
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.ip_conntrack_max = 65536
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_timestamps = 0
net.core.somaxconn = 16384
EOF
# 所有节点配置完内核后，重启服务器，保证重启后内核依旧加载
reboot
[root@k8s-master01 ~]# lsmod | grep --color=auto -e ip_vs -e nf_conntrack
ip_vs_ftp 16384 0
nf_nat 32768 1 ip_vs_ftp
ip_vs_sed 16384 0
ip_vs_nq 16384 0
ip_vs_fo 16384 0
ip_vs_sh 16384 0
ip_vs_dh 16384 0
ip_vs_lblcr 16384 0
ip_vs_lblc 16384 0
ip_vs_wrr 16384 0
ip_vs_rr 16384 0
ip_vs_wlc 16384 0
ip_vs_lc 16384 0
ip_vs 151552 24 ip_vs_wlc,ip_vs_rr,ip_vs_dh,ip_vs_lblcr,ip_vs_sh,ip_vs_fo,ip_vs_nq,ip_vs_lblc,ip_vs_wrr,ip_vs_lc,ip_vs_sed,ip_vs_ftp
nf_conntrack 143360 2 nf_nat,ip_vs
nf_defrag_ipv6 20480 1 nf_conntrack
nf_defrag_ipv4 16384 1 nf_conntrack
libcrc32c 16384 4 nf_conntrack,nf_nat,xfs,ip_vs
四、Docker安装
4.1、安装Docker-ce 19.03（所有节点）
yum install docker-ce-19.03.* -y
4.1.1温馨提示：
由于新版kubelet建议使用systemd，所以可以把docker的CgroupDriver改成systemd
mkdir /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
"exec-opts": ["native.cgroupdriver=systemd"]
}
EOF
4.1.2、所有节点设置开机自启动Docker
systemctl daemon-reload && systemctl enable --now docker
五、K8s及etcd安装
5.1、下载kubernetes安装包（Master01上）
# 注意目前版本是1.20.0，你们安装时需要下载最新的1.20.x版本：
# https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/
[root@k8s-master01 ~]# wget https://dl.k8s.io/v1.20.0/kubernetes-server-linux-amd64.tar.gz
5.2、下载etcd安装包（Master01上）
[root@k8s-master01 ~]# wget https://github.com/etcd-io/etcd/releases/download/v3.4.13/etcd-v3.4.13-linux-amd64.tar.gz
5.3、解压kubernetes（Master01上）
[root@k8s-master01 ~]# tar -xf kubernetes-server-linux-amd64.tar.gz --strip-components=3 -C /usr/local/bin kubernetes/server/bin/kube{let,ctl,-apiserver,-controller-manager,-scheduler,-proxy}
5.4、解压etcd（Master01上）
[root@k8s-master01 ~]# tar -zxvf etcd-v3.4.13-linux-amd64.tar.gz --strip-components=1 -C /usr/local/bin etcd-v3.4.13-linux-amd64/etcd{,ctl}
5.5、版本查看（Master01上）
[root@k8s-master01 ~]# kubelet --version
Kubernetes v1.20.0
[root@k8s-master01 ~]# etcdctl version
etcdctl version: 3.4.13
API version: 3.4
5.6、将组件发送到其他节点（Master01上）
[root@k8s-master01 ~]# MasterNodes='k8s-master02 k8s-master03'
[root@k8s-master01 ~]# WorkNodes='k8s-node01 k8s-node02'
[root@k8s-master01 ~]# for NODE in $MasterNodes; do echo $NODE; scp /usr/local/bin/kube{let,ctl,-apiserver,-controller-manager,-scheduler,-proxy} $NODE:/usr/local/bin/; scp /usr/local/bin/etcd* $NODE:/usr/local/bin/; done
[root@k8s-master01 ~]# for NODE in $WorkNodes; do scp /usr/local/bin/kube{let,-proxy} $NODE:/usr/local/bin/ ; done
5.7、创建/opt/cni/bin目录（所有节点）
mkdir -p /opt/cni/bin
5.8、切换分支（Master01上）
# 切换到1.20.x分支（其他版本可以切换到其他分支）
# 查看所有分支
[root@k8s-master01 ~]# cd k8s-ha-install/
[root@k8s-master01 k8s-ha-install]# git branch -a
* master
remotes/origin/HEAD -> origin/master
remotes/origin/manual-installation
remotes/origin/manual-installation-v1.16.x
remotes/origin/manual-installation-v1.17.x
remotes/origin/manual-installation-v1.18.x
remotes/origin/manual-installation-v1.19.x
remotes/origin/manual-installation-v1.20.x
remotes/origin/master
# 切换分之
git checkout manual-installation-v1.20.x
# 生成证书所需文件，如下所示
[root@k8s-master01 k8s-ha-install]# ls
bootstrap calico CoreDNS dashboard kube-proxy metrics-server-0.4.x metrics-server-0.4.x-kubeadm pki snapshotter
六、生成证书
二进制安装最关键步骤，一步错误全盘皆输，一定要注意每个步骤都要是正确的
6.1、下载生成证书工具（Master01）
wget "https://pkg.cfssl.org/R1.2/cfssl_linux-amd64" -O /usr/local/bin/cfssl
wget "https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64" -O /usr/local/bin/cfssljson
[root@k8s-master01 ~]# mv cfssl_linux-amd64 /usr/local/bin/cfssl
[root@k8s-master01 ~]# mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
[root@k8s-master01 ~]# chmod +x /usr/local/bin/cfssl /usr/local/bin/cfssljson
6.2、生成etcd证书
6.2.1、创建etcd证书目录（所有Master节点）
mkdir /etc/etcd/ssl -p
6.2.1、创建kubernetes证书目录（所有节点）
mkdir -p /etc/kubernetes/pki
6.2.3、生成etcd证书（Master01节点）将证书复制到其他节点
# 生成证书的CSR文件：证书签名请求文件，配置了一些域名、公司、单位
[root@k8s-master01 ~]# cd /root/k8s-ha-install/pki
# 生成etcd CA证书和CA证书的key
[root@k8s-master01 pki]# cfssl gencert -initca etcd-ca-csr.json | cfssljson -bare /etc/etcd/ssl/etcd-ca
2020/12/21 01:58:02 [INFO] generating a new CA key and certificate from CSR
2020/12/21 01:58:02 [INFO] generate received request
2020/12/21 01:58:02 [INFO] received CSR
2020/12/21 01:58:02 [INFO] generating key: rsa-2048
2020/12/21 01:58:03 [INFO] encoded CSR
2020/12/21 01:58:03 [INFO] signed certificate with serial number 140198241947074029848239512164671290627608591138
# 可以在-hostname 参数后面预留几个ip，方便日后扩容
[root@k8s-master01 pki]# cfssl gencert
-ca=/etc/etcd/ssl/etcd-ca.pem
-ca-key=/etc/etcd/ssl/etcd-ca-key.pem
-config=ca-config.json
-hostname=127.0.0.1,k8s-master01,k8s-master02,k8s-master03,192.168.1.100,192.168.1.101,192.168.1.102
-profile=kubernetes
etcd-csr.json | cfssljson -bare /etc/etcd/ssl/etcd
# 执行结果
2020/12/21 02:00:04 [INFO] generate received request
2020/12/21 02:00:04 [INFO] received CSR
2020/12/21 02:00:04 [INFO] generating key: rsa-2048
2020/12/21 02:00:05 [INFO] encoded CSR
2020/12/21 02:00:05 [INFO] signed certificate with serial number 470467884878418179395781489624244078991295464856
6.2.3、将证书复制到其他节点（Master01节点）
MasterNodes='k8s-master02 k8s-master03'
WorkNodes='k8s-node01 k8s-node02'
for NODE in $MasterNodes; do
ssh $NODE "mkdir -p /etc/etcd/ssl"
for FILE in etcd-ca-key.pem etcd-ca.pem etcd-key.pem etcd.pem; do
scp /etc/etcd/ssl/${FILE} $NODE:/etc/etcd/ssl/${FILE}
done
done
6.3、k8s组件证书
6.3.1、生成kubernetes证书（Master01节点）
[root@k8s-master01 ~]# cd /root/k8s-ha-install/pki
[root@k8s-master01 pki]# cfssl gencert -initca ca-csr.json | cfssljson -bare /etc/kubernetes/pki/ca
# 执行结果
2020/12/21 02:05:33 [INFO] generating a new CA key and certificate from CSR
2020/12/21 02:05:33 [INFO] generate received request
2020/12/21 02:05:33 [INFO] received CSR
2020/12/21 02:05:33 [INFO] generating key: rsa-2048
2020/12/21 02:05:34 [INFO] encoded CSR
2020/12/21 02:05:34 [INFO] signed certificate with serial number 41601140313910114593243737048758611445671732018
# 10.96.0.1是k8s service的网段，如果说需要更改k8s service网段，那就需要更改10.96.0.1，
# 如果不是高可用集群，192.168.1.246为Master01的IP
[root@k8s-master01 pki]# cfssl gencert -ca=/etc/kubernetes/pki/ca.pem -ca-key=/etc/kubernetes/pki/ca-key.pem -config=ca-config.json -hostname=10.96.0.1,192.168.1.246,127.0.0.1,kubernetes,kubernetes.default,kubernetes.default.svc,kubernetes.default.svc.cluster,kubernetes.default.svc.cluster.local,192.168.1.100,192.168.1.101,192.168.1.102 -profile=kubernetes apiserver-csr.json | cfssljson -bare /etc/kubernetes/pki/apiserver
# 执行结果
2020/12/21 02:07:26 [INFO] generate received request
2020/12/21 02:07:26 [INFO] received CSR
2020/12/21 02:07:26 [INFO] generating key: rsa-2048
2020/12/21 02:07:26 [INFO] encoded CSR
2020/12/21 02:07:26 [INFO] signed certificate with serial number 538625498609814572541825087295197801303230523180
6.3.2、生成apiserver的聚合证书（Master01节点）
[root@k8s-master01 pki]# cfssl gencert -initca front-proxy-ca-csr.json | cfssljson -bare /etc/kubernetes/pki/front-proxy-ca
# 执行结果
2020/12/21 02:08:45 [INFO] generating a new CA key and certificate from CSR
2020/12/21 02:08:45 [INFO] generate received request
2020/12/21 02:08:45 [INFO] received CSR
2020/12/21 02:08:45 [INFO] generating key: rsa-2048
2020/12/21 02:08:46 [INFO] encoded CSR
2020/12/21 02:08:46 [INFO] signed certificate with serial number 614553480240998616305316696839282255811191572397
[root@k8s-master01 pki]# cfssl gencert -ca=/etc/kubernetes/pki/front-proxy-ca.pem -ca-key=/etc/kubernetes/pki/front-proxy-ca-key.pem -config=ca-config.json -profile=kubernetes front-proxy-client-csr.json | cfssljson -bare /etc/kubernetes/pki/front-proxy-client
# 返回结果（忽略警告）
2020/12/21 02:09:23 [INFO] generate received request
2020/12/21 02:09:23 [INFO] received CSR
2020/12/21 02:09:23 [INFO] generating key: rsa-2048
2020/12/21 02:09:23 [INFO] encoded CSR
2020/12/21 02:09:23 [INFO] signed certificate with serial number 525521597243375822253206665544676632452020336672
2020/12/21 02:09:23 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").
6.3.3、生成controller-manage的证书（Master01节点）
[root@k8s-master01 pki]# cfssl gencert
-ca=/etc/kubernetes/pki/ca.pem
-ca-key=/etc/kubernetes/pki/ca-key.pem
-config=ca-config.json
-profile=kubernetes
manager-csr.json | cfssljson -bare /etc/kubernetes/pki/controller-manager
# 执行结果
2020/12/21 02:10:59 [INFO] generate received request
2020/12/21 02:10:59 [INFO] received CSR
2020/12/21 02:10:59 [INFO] generating key: rsa-2048
2020/12/21 02:10:59 [INFO] encoded CSR
2020/12/21 02:10:59 [INFO] signed certificate with serial number 90004917734039884153079426464391358123145661914
2020/12/21 02:10:59 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").
# 注意，如果不是高可用集群，192.168.1.246:8443改为master01的地址，8443改为apiserver的端口，默认是6443
# set-cluster：设置一个集群项,192.168.1.246是VIP
kubectl config set-cluster kubernetes
--certificate-authority=/etc/kubernetes/pki/ca.pem
--embed-certs=true
--server=https://192.168.1.246:8443
--kubeconfig=/etc/kubernetes/controller-manager.kubeconfig
# 执行结果
Cluster "kubernetes" set.
# 设置一个环境项，一个上下文
[root@k8s-master01 pki]# kubectl config set-context system:kube-controller-manager@kubernetes
--cluster=kubernetes
--user=system:kube-controller-manager
--kubeconfig=/etc/kubernetes/controller-manager.kubeconfig
# 执行结果
Context "system:kube-controller-manager@kubernetes" created.
# set-credentials 设置一个用户项
[root@k8s-master01 pki]# kubectl config set-credentials system:kube-controller-manager
--client-certificate=/etc/kubernetes/pki/controller-manager.pem
--client-key=/etc/kubernetes/pki/controller-manager-key.pem
--embed-certs=true
--kubeconfig=/etc/kubernetes/controller-manager.kubeconfig
# 执行结果
User "system:kube-controller-manager" set.
# 使用某个环境当做默认环境
[root@k8s-master01 pki]# kubectl config use-context system:kube-controller-manager@kubernetes
--kubeconfig=/etc/kubernetes/controller-manager.kubeconfig
# 执行结果
Switched to context "system:kube-controller-manager@kubernetes".
cfssl gencert
-ca=/etc/kubernetes/pki/ca.pem
-ca-key=/etc/kubernetes/pki/ca-key.pem
-config=ca-config.json
-profile=kubernetes
scheduler-csr.json | cfssljson -bare /etc/kubernetes/pki/scheduler
# 执行结果
2020/12/21 02:16:12 [INFO] generate received request
2020/12/21 02:16:12 [INFO] received CSR
2020/12/21 02:16:12 [INFO] generating key: rsa-2048
2020/12/21 02:16:12 [INFO] encoded CSR
2020/12/21 02:16:12 [INFO] signed certificate with serial number 74188665800103042050582037108256409976332653077
2020/12/21 02:16:12 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").
# 注意，如果不是高可用集群，192.168.1.246:8443改为master01的地址，8443改为apiserver的端口，默认是6443
kubectl config set-cluster kubernetes
--certificate-authority=/etc/kubernetes/pki/ca.pem
--embed-certs=true
--server=https://192.168.1.246:8443
--kubeconfig=/etc/kubernetes/scheduler.kubeconfig
kubectl config set-credentials system:kube-scheduler
--client-certificate=/etc/kubernetes/pki/scheduler.pem
--client-key=/etc/kubernetes/pki/scheduler-key.pem
--embed-certs=true
--kubeconfig=/etc/kubernetes/scheduler.kubeconfig
kubectl config set-context system:kube-scheduler@kubernetes
--cluster=kubernetes
--user=system:kube-scheduler
--kubeconfig=/etc/kubernetes/scheduler.kubeconfig
kubectl config use-context system:kube-scheduler@kubernetes
--kubeconfig=/etc/kubernetes/scheduler.kubeconfig
cfssl gencert
-ca=/etc/kubernetes/pki/ca.pem
-ca-key=/etc/kubernetes/pki/ca-key.pem
-config=ca-config.json
-profile=kubernetes
admin-csr.json | cfssljson -bare /etc/kubernetes/pki/admin
# 注意，如果不是高可用集群，192.168.1.246:8443改为master01的地址，8443改为apiserver的端口，默认是6443
kubectl config set-cluster kubernetes --certificate-authority=/etc/kubernetes/pki/ca.pem --embed-certs=true --server=https://192.168.1.246:8443 --kubeconfig=/etc/kubernetes/admin.kubeconfig
kubectl config set-credentials kubernetes-admin --client-certificate=/etc/kubernetes/pki/admin.pem --client-key=/etc/kubernetes/pki/admin-key.pem --embed-certs=true --kubeconfig=/etc/kubernetes/admin.kubeconfig
kubectl config set-context kubernetes-admin@kubernetes --cluster=kubernetes --user=kubernetes-admin --kubeconfig=/etc/kubernetes/admin.kubeconfig
kubectl config use-context kubernetes-admin@kubernetes --kubeconfig=/etc/kubernetes/admin.kubeconfig
6.3.4、创建ServiceAccount Key à secret
[root@k8s-master01 pki]# openssl genrsa -out /etc/kubernetes/pki/sa.key 2048
# 执行结果
Generating RSA private key, 2048 bit long modulus
..............................+++
.............................................................+++
e is 65537 (0x10001)
[root@k8s-master01 pki]# openssl rsa -in /etc/kubernetes/pki/sa.key -pubout -out /etc/kubernetes/pki/sa.pub
# 执行结果
writing RSA key
6.3.5、发送证书至其他节点
for NODE in k8s-master02 k8s-master03; do
for FILE in $(ls /etc/kubernetes/pki | grep -v etcd); do
scp /etc/kubernetes/pki/${FILE} $NODE:/etc/kubernetes/pki/${FILE};
done;
for FILE in admin.kubeconfig controller-manager.kubeconfig scheduler.kubeconfig; do
scp /etc/kubernetes/${FILE} $NODE:/etc/kubernetes/${FILE};
done;
done;
6.3.6、查看证书文件
[root@k8s-master01 pki]# ls /etc/kubernetes/pki/
admin.csr apiserver.csr ca.csr controller-manager.csr front-proxy-ca.csr front-proxy-client.csr sa.key scheduler-key.pem
admin-key.pem apiserver-key.pem ca-key.pem controller-manager-key.pem front-proxy-ca-key.pem front-proxy-client-key.pem sa.pub scheduler.pem
admin.pem apiserver.pem ca.pem controller-manager.pem front-proxy-ca.pem front-proxy-client.pem scheduler.csr
[root@k8s-master01 pki]# ls /etc/kubernetes/pki/ |wc -l
23
七、Kubernetes系统组件配置
7.1、Etcd配置（所有Master节点）
etcd配置大致相同，注意修改每个Master节点的etcd配置的主机名和IP地址
7.1.1、Master01上
[root@k8s-master01 ~]# vim /etc/etcd/etcd.config.yml
name: 'k8s-master01'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://192.168.1.100:2380'
listen-client-urls: 'https://192.168.1.100:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://192.168.1.100:2380'
advertise-client-urls: 'https://192.168.1.100:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://192.168.1.100:2380,k8s-master02=https://192.168.1.101:2380,k8s-master03=https://192.168.1.102:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
peer-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
peer-client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false
7.1.2、Master02上
[root@k8s-master02 ~]# vim /etc/etcd/etcd.config.yml
name: 'k8s-master02'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://192.168.1.101:2380'
listen-client-urls: 'https://192.168.1.101:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://192.168.1.101:2380'
advertise-client-urls: 'https://192.168.1.101:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://192.168.1.100:2380,k8s-master02=https://192.168.1.101:2380,k8s-master03=https://192.168.1.102:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
peer-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
peer-client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false
7.1.3、Master03上
[root@k8s-master03 ~]# vim /etc/etcd/etcd.config.yml
name: 'k8s-master03'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://192.168.1.102:2380'
listen-client-urls: 'https://192.168.1.102:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://192.168.1.102:2380'
advertise-client-urls: 'https://192.168.1.102:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://192.168.1.100:2380,k8s-master02=https://192.168.1.101:2380,k8s-master03=https://192.168.1.102:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
peer-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
peer-client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false
7.2、 创建Service
7.2.1、创建etcd service并启动（所有Master节点）
vim /usr/lib/systemd/system/etcd.service
[Unit]
Description=Etcd Service
Documentation=https://coreos.com/etcd/docs/latest/
After=network.target
[Service]
Type=notify
ExecStart=/usr/local/bin/etcd --config-file=/etc/etcd/etcd.config.yml
Restart=on-failure
RestartSec=10
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
Alias=etcd3.service
7.2.2、创建etcd的证书目录（所有Master节点）
cd /etc/etcd/ssl && scp * k8s-master02:`pwd` && scp * k8s-master03:`pwd`
mkdir /etc/kubernetes/pki/etcd
ln -s /etc/etcd/ssl/* /etc/kubernetes/pki/etcd/
systemctl daemon-reload
systemctl enable --now etcd
7.2.3、查看集群状态（任意master）
[root@k8s-master03 ~]# export ETCDCTL_API=3
[root@k8s-master03 ~]# etcdctl --endpoints="192.168.1.102:2379,192.168.1.101:2379,192.168.1.100:2379" --cacert=/etc/kubernetes/pki/etcd/etcd-ca.pem --cert=/etc/kubernetes/pki/etcd/etcd.pem --key=/etc/kubernetes/pki/etcd/etcd-key.pem endpoint status --write-out=table
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
| ENDPOINT | ID | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
| 192.168.1.102:2379 | a77e5ca7bd4dc035 | 3.4.13 | 20 kB | false | false | 465 | 9 | 9 | |
| 192.168.1.101:2379 | e3adc675ac3b3dbd | 3.4.13 | 20 kB | false | false | 465 | 9 | 9 | |
| 192.168.1.100:2379 | 47a087175e3f17b3 | 3.4.13 | 20 kB | true | false | 465 | 9 | 9 | |
+--------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
八、高可用配置
高可用配置（注意：如果不是高可用集群，haproxy和keepalived无需安装）
如果在云上安装也无需执行此章节的步骤，可以直接使用云上的lb，比如阿里云slb，腾讯云elb等
Slb -> haproxy -> apiserver
8.1、安装keepalived和haproxy（所有Master节点）
yum install keepalived haproxy -y
8.2、Master配置HAProxy，Master节点都配置一样
vim /etc/haproxy/haproxy.cfg
global
maxconn 2000
ulimit-n 16384
log 127.0.0.1 local0 err
stats timeout 30s
defaults
log global
mode http
option httplog
timeout connect 5000
timeout client 50000
timeout server 50000
timeout http-request 15s
timeout http-keep-alive 15s
frontend k8s-master
bind 0.0.0.0:8443
bind 127.0.0.1:8443
mode tcp
option tcplog
tcp-request inspect-delay 5s
default_backend k8s-master
backend k8s-master
mode tcp
option tcplog
option tcp-check
balance roundrobin
default-server inter 10s downinter 5s rise 2 fall 2 slowstart 60s maxconn 250 maxqueue 256 weight 100
server k8s-master01 192.168.1.100:6443 check
server k8s-master02 192.168.1.101:6443 check
server k8s-master03 192.168.1.102:6443 check
8.3、配置KeepAlived（Master节点）
注意每个节点的IP和网卡（interface参数）
8.3.1、Master01
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
script "/etc/keepalived/check_apiserver.sh"
interval 5
weight -5
fall 2
rise 1
}
vrrp_instance VI_1 {
state MASTER
interface ens33
mcast_src_ip 192.168.1.100
virtual_router_id 51
priority 101
nopreempt
advert_int 2
authentication {
auth_type PASS
auth_pass K8SHA_KA_AUTH
}
virtual_ipaddress {
192.168.1.246
}
track_script {
chk_apiserver
} }
8.3.2、Master02
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
script "/etc/keepalived/check_apiserver.sh"
interval 5
weight -5
fall 2
rise 1
}
vrrp_instance VI_1 {
state BACKUP
interface ens33
mcast_src_ip 192.168.1.101
virtual_router_id 51
priority 100
nopreempt
advert_int 2
authentication {
auth_type PASS
auth_pass K8SHA_KA_AUTH
}
virtual_ipaddress {
192.168.1.246
}
track_script {
chk_apiserver
} }
8.3.3、Master03
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
script "/etc/keepalived/check_apiserver.sh"
interval 5
weight -5
fall 2
rise 1
}
vrrp_instance VI_1 {
state BACKUP
interface ens33
mcast_src_ip 192.168.1.102
virtual_router_id 51
priority 100
nopreempt
advert_int 2
authentication {
auth_type PASS
auth_pass K8SHA_KA_AUTH
}
virtual_ipaddress {
192.168.1.246
}
track_script {
chk_apiserver
} }
8.3.4、健康检查脚本（所有master节点）
cat > /etc/keepalived/check_apiserver.sh << EFO
#!/bin/bash
err=0
for k in $(seq 1 3)
do
check_code=$(pgrep haproxy)
if [[ $check_code == "" ]]; then
err=$(expr $err + 1)
sleep 1
continue
else
err=0
break
fi
done
if [[ $err != "0" ]]; then
echo "systemctl stop keepalived"
/usr/bin/systemctl stop keepalived
exit 1
else
exit 0
fi
EFO
# 授权
chmod +x /etc/keepalived/check_apiserver.sh
8.3.5、节点启动haproxy和keepalived（所有master节点）
systemctl daemon-reload
systemctl enable --now haproxy
systemctl enable --now keepalived
8.3.6、VIP测试 （master01）
重要：如果安装了keepalived和haproxy，需要测试keepalived是否是正常的
# 看到有VIP绑定到ens33网卡上了
[root@k8s-master01 ~]# ip a | grep ens33
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
inet 192.168.1.100/24 brd 192.168.1.255 scope global ens33
inet 192.168.1.246/32 scope global ens33
# 任意节点，检查haproxy
telnet 192.168.1.246 8443
如果ping不通且telnet没有出现 "]"，则认为VIP不可以，不可在继续往下执行，需要排查keepalived的问题，比如防火墙和selinux，haproxy和keepalived的状态，监听端口等
所有节点查看防火墙状态必须为disable和inactive：systemctl status firewalld
所有节点查看selinux状态，必须为disable：getenforce
master节点查看haproxy和keepalived状态：systemctl status keepalived haproxy
master节点查看监听端口：netstat -lntp
九、Kubernetes组件配置
9.1、Apiserver
所有Master节点创建kube-apiserver service，# 注意，如果不是高可用集群，192.168.1.246改为master01的地址
注意本文档使用的k8s service网段为10.96.0.0/12，该网段不能和宿主机的网段、Pod网段的重复，请按需修改
9.1.1、Master01配置
[root@k8s-master01 ~]# vim /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-apiserver
--v=2
--logtostderr=true
--allow-privileged=true
--bind-address=0.0.0.0
--secure-port=6443
--insecure-port=0
--advertise-address=192.168.1.100 # 主机IP
--service-cluster-ip-range=10.96.0.0/12 # service网段
--service-node-port-range=30000-32767
--etcd-servers=https://192.168.1.100:2379,https://192.168.1.101:2379,https://192.168.1.102:2379
--etcd-cafile=/etc/etcd/ssl/etcd-ca.pem
--etcd-certfile=/etc/etcd/ssl/etcd.pem
--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem
--client-ca-file=/etc/kubernetes/pki/ca.pem
--tls-cert-file=/etc/kubernetes/pki/apiserver.pem
--tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem
--kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem
--kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem
--service-account-key-file=/etc/kubernetes/pki/sa.pub
--service-account-signing-key-file=/etc/kubernetes/pki/sa.key
--service-account-issuer=https://kubernetes.default.svc.cluster.local
--kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota
--authorization-mode=Node,RBAC
--enable-bootstrap-token-auth=true
--requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem
--proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem
--proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem
--requestheader-allowed-names=aggregator
--requestheader-group-headers=X-Remote-Group
--requestheader-extra-headers-prefix=X-Remote-Extra-
--requestheader-username-headers=X-Remote-User
# --token-auth-file=/etc/kubernetes/token.csv
Restart=on-failure
RestartSec=10s
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
9.1.2、Master01配置
[root@k8s-master02 ~]# vim /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-apiserver
--v=2
--logtostderr=true
--allow-privileged=true
--bind-address=0.0.0.0
--secure-port=6443
--insecure-port=0
--advertise-address=192.168.1.101 # 主机IP
--service-cluster-ip-range=10.96.0.0/12 # servicer IP
--service-node-port-range=30000-32767
--etcd-servers=https://192.168.1.100:2379,https://192.168.1.101:2379,https://192.168.1.102:2379
--etcd-cafile=/etc/etcd/ssl/etcd-ca.pem
--etcd-certfile=/etc/etcd/ssl/etcd.pem
--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem
--client-ca-file=/etc/kubernetes/pki/ca.pem
--tls-cert-file=/etc/kubernetes/pki/apiserver.pem
--tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem
--kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem
--kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem
--service-account-key-file=/etc/kubernetes/pki/sa.pub
--service-account-signing-key-file=/etc/kubernetes/pki/sa.key
--service-account-issuer=https://kubernetes.default.svc.cluster.local
--kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota
--authorization-mode=Node,RBAC
--enable-bootstrap-token-auth=true
--requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem
--proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem
--proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem
--requestheader-allowed-names=aggregator
--requestheader-group-headers=X-Remote-Group
--requestheader-extra-headers-prefix=X-Remote-Extra-
--requestheader-username-headers=X-Remote-User
# --token-auth-file=/etc/kubernetes/token.csv
Restart=on-failure
RestartSec=10s
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
9.1.3、Master01配置
[root@k8s-master03 ~]# vim /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-apiserver
--v=2
--logtostderr=true
--allow-privileged=true
--bind-address=0.0.0.0
--secure-port=6443
--insecure-port=0
--advertise-address=192.168.1.102 # 主机IP
--service-cluster-ip-range=10.96.0.0/12 # service IP
--service-node-port-range=30000-32767
--etcd-servers=https://192.168.1.100:2379,https://192.168.1.101:2379,https://192.168.1.102:2379
--etcd-cafile=/etc/etcd/ssl/etcd-ca.pem
--etcd-certfile=/etc/etcd/ssl/etcd.pem
--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem
--client-ca-file=/etc/kubernetes/pki/ca.pem
--tls-cert-file=/etc/kubernetes/pki/apiserver.pem
--tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem
--kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem
--kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem
--service-account-key-file=/etc/kubernetes/pki/sa.pub
--service-account-signing-key-file=/etc/kubernetes/pki/sa.key
--service-account-issuer=https://kubernetes.default.svc.cluster.local
--kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota
--authorization-mode=Node,RBAC
--enable-bootstrap-token-auth=true
--requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem
--proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem
--proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem
--requestheader-allowed-names=aggregator
--requestheader-group-headers=X-Remote-Group
--requestheader-extra-headers-prefix=X-Remote-Extra-
--requestheader-username-headers=X-Remote-User
# --token-auth-file=/etc/kubernetes/token.csv
Restart=on-failure
RestartSec=10s
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
9.1.4、启动apiserver（所有Master节点）
systemctl daemon-reload && systemctl enable --now kube-apiserver
# 检测kube-server状态
systemctl status kube-apiserver
# 执行结果
● kube-apiserver.service - Kubernetes API Server
Loaded: loaded (/usr/lib/systemd/system/kube-apiserver.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2020-12-21 03:50:34 CST; 56s ago
Docs: https://github.com/kubernetes/kubernetes
# 以下日志不需要理会，是正常的日志
balancer_conn_wrappers.go:78] pickfirstBalancer: HandleSubConnStateChange: 0xc01124e0e0, {READY <nil>}
Dec 21 03:51:19 k8s-master01 kube-apiserver[10428]: I1221 03:51:19.699478 10428 controlbuf.go:508] transport: loopyWriter.run returning. connection error: desc = "transport is closing"
9.2、配置kube-controller-manager service （所有Master节点）
注意本文档使用的k8s Pod网段为172.16.0.0/12，该网段不能和宿主机的网段、k8s Service网段的重复，请按需修改
9.2.1、三Master配置文件节点相同
vim /usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-controller-manager
--v=2
--logtostderr=true
--address=127.0.0.1
--root-ca-file=/etc/kubernetes/pki/ca.pem
--cluster-signing-cert-file=/etc/kubernetes/pki/ca.pem
--cluster-signing-key-file=/etc/kubernetes/pki/ca-key.pem
--service-account-private-key-file=/etc/kubernetes/pki/sa.key
--kubeconfig=/etc/kubernetes/controller-manager.kubeconfig
--leader-elect=true
--use-service-account-credentials=true
--node-monitor-grace-period=40s
--node-monitor-period=5s
--pod-eviction-timeout=2m0s
--controllers=*,bootstrapsigner,tokencleaner
--allocate-node-cidrs=true
--cluster-cidr=172.16.0.0/12
--requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem
--node-cidr-mask-size=24
Restart=always
RestartSec=10s
[Install]
WantedBy=multi-user.target
9.2.2、启动（所有matser节点）
systemctl daemon-reload && systemctl enable --now kube-controller-manager
9.2.3、查看状态（所有matser节点）
systemctl status kube-controller-manager
● kube-controller-manager.service - Kubernetes Controller Manager
Loaded: loaded (/usr/lib/systemd/system/kube-controller-manager.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2020-12-21 03:59:21 CST; 28s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 13594 (kube-controller)
9.3、配置kube-scheduler service（所有Master节点）
9.3.1、所有master节点配置文件相同
vim /usr/lib/systemd/system/kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-scheduler
--v=2
--logtostderr=true
--address=127.0.0.1
--leader-elect=true
--kubeconfig=/etc/kubernetes/scheduler.kubeconfig
Restart=always
RestartSec=10s
[Install]
WantedBy=multi-user.target
9.3.2、启动
systemctl daemon-reload && systemctl enable --now kube-scheduler
9.3.3、查看状态
systemctl status kube-scheduler
● kube-scheduler.service - Kubernetes Scheduler
Loaded: loaded (/usr/lib/systemd/system/kube-scheduler.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2020-12-21 04:03:50 CST; 17s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 10915 (kube-scheduler)
十、TLS Bootstrapping配置
10.1、创建bootstrap（Master01节点）
注意，如果不是高可用集群，192.168.1.246:8443改为master01的地址，8443改为apiserver的端口，默认是6443
[root@k8s-master01 ~]# cd /root/k8s-ha-install/bootstrap
kubectl config set-cluster kubernetes --certificate-authority=/etc/kubernetes/pki/ca.pem --embed-certs=true --server=https://192.168.1.246:8443 --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config set-credentials tls-bootstrap-token-user --token=c8ad9c.2e4d610cf3e7426e --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config set-context tls-bootstrap-token-user@kubernetes --cluster=kubernetes --user=tls-bootstrap-token-user --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config use-context tls-bootstrap-token-user@kubernetes --kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
注意：如果要修改bootstrap.secret.yaml的token-id和token-secret，需要保证下图红圈内的字符串一致的，并且位数是一样的。还要保证上个命令的黄色字体：c8ad9c.2e4d610cf3e7426e与你修改的字符串要一致
apiVersion: v1
kind: Secret
metadata:
name: bootstrap-token-c8ad9c
namespace: kube-system
type: bootstrap.kubernetes.io/token
stringData:
description: "The default bootstrap token generated by 'kubelet '."
token-id: c8ad9c #这个跟metadata.name 后面那个一样
[root@k8s-master01 ~]# cd /root/k8s-ha-install/bootstrap
[root@k8s-master01 bootstrap]# mkdir -p /root/.kube ; cp /etc/kubernetes/admin.kubeconfig /root/.kube/config
[root@k8s-master01 bootstrap]# kubectl create -f bootstrap.secret.yaml
secret/bootstrap-token-c8ad9c created
clusterrolebinding.rbac.authorization.k8s.io/kubelet-bootstrap created
clusterrolebinding.rbac.authorization.k8s.io/node-autoapprove-bootstrap created
clusterrolebinding.rbac.authorization.k8s.io/node-autoapprove-certificate-rotation created
clusterrole.rbac.authorization.k8s.io/system:kube-apiserver-to-kubelet created
clusterrolebinding.rbac.authorization.k8s.io/system:kube-apiserver created
十一、Node节点配置
11.1、复制证书至Node节点
[root@k8s-master01 ~]# cd /etc/kubernetes/
for NODE in k8s-master02 k8s-master03 k8s-node01 k8s-node02; do
ssh $NODE mkdir -p /etc/kubernetes/pki /etc/etcd/ssl /etc/etcd/ssl
for FILE in etcd-ca.pem etcd.pem etcd-key.pem; do
scp /etc/etcd/ssl/$FILE $NODE:/etc/etcd/ssl/
done
for FILE in pki/ca.pem pki/ca-key.pem pki/front-proxy-ca.pem bootstrap-kubelet.kubeconfig; do
scp /etc/kubernetes/$FILE $NODE:/etc/kubernetes/${FILE}
done
done
11.2、Kubelet配置
11.2.1、创建相关目录（所有节点）
mkdir -p /var/lib/kubelet /var/log/kubernetes /etc/systemd/system/kubelet.service.d /etc/kubernetes/manifests/
11.2.2、配置kubelet service（所有节点）
vim /usr/lib/systemd/system/kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service
[Service]
ExecStart=/usr/local/bin/kubelet
Restart=always
StartLimitInterval=0
RestartSec=10
[Install]
WantedBy=multi-user.target
11.2.3、配置kubelet service的配置文件（所有节点）
vim /etc/systemd/system/kubelet.service.d/10-kubelet.conf
[Service]
Environment="KUBELET_KUBECONFIG_ARGS=--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig --kubeconfig=/etc/kubernetes/kubelet.kubeconfig"
Environment="KUBELET_SYSTEM_ARGS=--network-plugin=cni --cni-conf-dir=/etc/cni/net.d --cni-bin-dir=/opt/cni/bin"
Environment="KUBELET_CONFIG_ARGS=--config=/etc/kubernetes/kubelet-conf.yml --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause-amd64:3.2"
Environment="KUBELET_EXTRA_ARGS=--node-labels=node.kubernetes.io/node='' "
ExecStart=
ExecStart=/usr/local/bin/kubelet $KUBELET_KUBECONFIG_ARGS $KUBELET_CONFIG_ARGS $KUBELET_SYSTEM_ARGS $KUBELET_EXTRA_ARGS
11.2.4、kubelet的配置文件（所有节点）启动所有节点kubelet
注意：如果更改了k8s的service网段，需要更改kubelet-conf.yml 的clusterDNS:配置，改成k8s Service网段的第十个地址，比如10.96.0.10（k8s的service网段开始设置的是10.96.0.0/12）
vim /etc/kubernetes/kubelet-conf.yml
apiVersion: kubelet.config.k8s.io/v1beta1
kind: KubeletConfiguration
address: 0.0.0.0
port: 10250
readOnlyPort: 10255
authentication:
anonymous:
enabled: false
webhook:
cacheTTL: 2m0s
enabled: true
x509:
clientCAFile: /etc/kubernetes/pki/ca.pem
authorization:
mode: Webhook
webhook:
cacheAuthorizedTTL: 5m0s
cacheUnauthorizedTTL: 30s
cgroupDriver: systemd
cgroupsPerQOS: true
clusterDNS:
- 10.96.0.10
clusterDomain: cluster.local
containerLogMaxFiles: 5
containerLogMaxSize: 10Mi
contentType: application/vnd.kubernetes.protobuf
cpuCFSQuota: true
cpuManagerPolicy: none
cpuManagerReconcilePeriod: 10s
enableControllerAttachDetach: true
enableDebuggingHandlers: true
enforceNodeAllocatable:
- pods
eventBurst: 10
eventRecordQPS: 5
evictionHard:
imagefs.available: 15%
memory.available: 100Mi
nodefs.available: 10%
nodefs.inodesFree: 5%
evictionPressureTransitionPeriod: 5m0s
failSwapOn: true
fileCheckFrequency: 20s
hairpinMode: promiscuous-bridge
healthzBindAddress: 127.0.0.1
healthzPort: 10248
httpCheckFrequency: 20s
imageGCHighThresholdPercent: 85
imageGCLowThresholdPercent: 80
imageMinimumGCAge: 2m0s
iptablesDropBit: 15
iptablesMasqueradeBit: 14
kubeAPIBurst: 10
kubeAPIQPS: 5
makeIPTablesUtilChains: true
maxOpenFiles: 1000000
maxPods: 110
nodeStatusUpdateFrequency: 10s
oomScoreAdj: -999
podPidsLimit: -1
registryBurst: 10
registryPullQPS: 5
resolvConf: /etc/resolv.conf
rotateCertificates: true
runtimeRequestTimeout: 2m0s
serializeImagePulls: true
staticPodPath: /etc/kubernetes/manifests
streamingConnectionIdleTimeout: 4h0m0s
syncFrequency: 1m0s
volumeStatsAggPeriod: 1m0s
11.2.5、启动kubelet（所有节点）
systemctl daemon-reload
systemctl enable --now kubelet
# 查看此时系统日志
tail -f /var/log/messages
11.2.6、查看集群状态（matser01上）
[root@k8s-master01 ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-master01 NotReady <none> 3m48s v1.20.0
k8s-master02 NotReady <none> 3m48s v1.20.0
k8s-master03 NotReady <none> 3m48s v1.20.0
k8s-node01 NotReady <none> 3m47s v1.20.0
k8s-node02 NotReady <none> 3m48s v1.20.0
11.3、kube-proxy配置
注意，如果不是高可用集群，192.168.1.246:8443改为master01的地址，8443改为apiserver的端口，默认是6443
11.3.1、Master01执行
[root@k8s-master01 ~]# cd /root/k8s-ha-install
kubectl -n kube-system create serviceaccount kube-proxy
kubectl create clusterrolebinding system:kube-proxy --clusterrole system:node-proxier --serviceaccount kube-system:kube-proxy
SECRET=$(kubectl -n kube-system get sa/kube-proxy
--output=jsonpath='{.secrets[0].name}')
JWT_TOKEN=$(kubectl -n kube-system get secret/$SECRET
--output=jsonpath='{.data.token}' | base64 -d)
PKI_DIR=/etc/kubernetes/pki
K8S_DIR=/etc/kubernetes
kubectl config set-cluster kubernetes --certificate-authority=/etc/kubernetes/pki/ca.pem --embed-certs=true --server=https://192.168.1.246:8443 --kubeconfig=${K8S_DIR}/kube-proxy.kubeconfig
kubectl config set-credentials kubernetes --token=${JWT_TOKEN} --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config set-context kubernetes --cluster=kubernetes --user=kubernetes --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config use-context kubernetes --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
11.3.2、发送kube-proxy的systemd Service文件发送到其他节点（master01上）
如果更改了集群Pod的网段，需要更改kube-proxy/kube-proxy.conf的clusterCIDR: 172.16.0.0/12参数为pod的网段。
[root@k8s-master01 ~]# vim /root/k8s-ha-install/kube-proxy/kube-proxy.conf
clusterCIDR: 172.16.0.0/12
分发配置文件（master01上）
[root@k8s-master01 ~]# cd /root/k8s-ha-install
for NODE in k8s-master01 k8s-master02 k8s-master03; do
scp ${K8S_DIR}/kube-proxy.kubeconfig $NODE:/etc/kubernetes/kube-proxy.kubeconfig
scp kube-proxy/kube-proxy.conf $NODE:/etc/kubernetes/kube-proxy.conf
scp kube-proxy/kube-proxy.service $NODE:/usr/lib/systemd/system/kube-proxy.service
done
for NODE in k8s-node01 k8s-node02; do
scp /etc/kubernetes/kube-proxy.kubeconfig $NODE:/etc/kubernetes/kube-proxy.kubeconfig
scp kube-proxy/kube-proxy.conf $NODE:/etc/kubernetes/kube-proxy.conf
scp kube-proxy/kube-proxy.service $NODE:/usr/lib/systemd/system/kube-proxy.service
done
11..3.3、启动kube-proxy（所有节点）
systemctl daemon-reload && systemctl enable --now kube-proxy
十二、安装Calico
Calico的安装请必须听视频课程和最后一章升级Calico的视频
12.1、安装Calico（在master01上）
[root@k8s-master01 ~]# cd /root/k8s-ha-install/calico/
# 修改calico-etcd.yaml的以下位置
sed -i 's#etcd_endpoints: "http://<ETCD_IP>:<ETCD_PORT>"#etcd_endpoints: "https://192.168.1.100:2379,https://192.168.1.101:2379,https://192.168.1.102:2379"#g' calico-etcd.yaml
ETCD_CA=`cat /etc/kubernetes/pki/etcd/etcd-ca.pem | base64 | tr -d '
'`
ETCD_CERT=`cat /etc/kubernetes/pki/etcd/etcd.pem | base64 | tr -d '
'`
ETCD_KEY=`cat /etc/kubernetes/pki/etcd/etcd-key.pem | base64 | tr -d '
'`
sed -i "s@# etcd-key: null@etcd-key: ${ETCD_KEY}@g; s@# etcd-cert: null@etcd-cert: ${ETCD_CERT}@g; s@# etcd-ca: null@etcd-ca: ${ETCD_CA}@g" calico-etcd.yaml
sed -i 's#etcd_ca: ""#etcd_ca: "/calico-secrets/etcd-ca"#g; s#etcd_cert: ""#etcd_cert: "/calico-secrets/etcd-cert"#g; s#etcd_key: "" #etcd_key: "/calico-secrets/etcd-key" #g' calico-etcd.yaml
# 更改此处为自己的pod网段
POD_SUBNET="172.168.0.0/12"
sed -i 's@# - name: CALICO_IPV4POOL_CIDR@- name: CALICO_IPV4POOL_CIDR@g; s@# value: "192.168.0.0/16"@ value: '"${POD_SUBNET}"'@g' calico-etcd.yaml
12.2、apply
[root@k8s-master01 calico]# kubectl apply -f calico-etcd.yaml
# 执行结果
secret/calico-etcd-secrets created
configmap/calico-config created
clusterrole.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrole.rbac.authorization.k8s.io/calico-node created
clusterrolebinding.rbac.authorization.k8s.io/calico-node created
daemonset.apps/calico-node created
serviceaccount/calico-node created
deployment.apps/calico-kube-controllers created
serviceaccount/calico-kube-controllers created
12.3、查看容器状态
如果容器状态异常可以使用kubectl describe 或者logs查看容器的日志
[root@k8s-master01 calico]# kubectl get po -n kube-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-5f6d4b864b-pq2qw 0/1 Pending 0 45s
calico-node-75blv 0/1 Init:0/2 0 46s
calico-node-hw27b 0/1 Init:0/2 0 46s
calico-node-k2wdf 0/1 Init:0/2 0 46s
calico-node-l58lz 0/1 Init:0/2 0 46s
calico-node-v2qlq 0/1 Init:0/2 0 46s
coredns-867d46bfc6-8vzrk 0/1 Pending 0 10m
十三、安装CoreDNS
13.1、安装对应版本（推荐）
如果更改了k8s service的网段需要将coredns的serviceIP改成k8s service网段的第十个IP
cd /root/k8s-ha-install/
[root@k8s-master01 k8s-ha-install]# sed -i "s#10.96.0.10#10.96.0.10#g" CoreDNS/coredns.yaml
13.2、安装coredns
[root@k8s-master01 k8s-ha-install]# kubectl create -f CoreDNS/coredns.yaml
# 执行结果
serviceaccount/coredns created
clusterrole.rbac.authorization.k8s.io/system:coredns created
clusterrolebinding.rbac.authorization.k8s.io/system:coredns created
configmap/coredns created
deployment.apps/coredns created
service/kube-dns created
13.3、安装最新版CoreDNS（不建议）
git clone https://github.com/coredns/deployment.git
cd deployment/kubernetes
# ./deploy.sh -s -i 10.96.0.10 | kubectl apply -f -
serviceaccount/coredns created
clusterrole.rbac.authorization.k8s.io/system:coredns created
clusterrolebinding.rbac.authorization.k8s.io/system:coredns created
configmap/coredns created
deployment.apps/coredns created
service/kube-dns created
查看状态
# kubectl get po -n kube-system -l k8s-app=kube-dns
NAME READY STATUS RESTARTS AGE
coredns-85b4878f78-h29kh 1/1 Running 0 8h
十四、安装Metrics Server
在新版的Kubernetes中系统资源的采集均使用Metrics-server，可以通过Metrics采集节点和Pod的内存、磁盘、CPU和网络的使用率
14.1、安装metrics server
[root@k8s-master01 ~]# cd /root/k8s-ha-install/metrics-server-0.4.x/
[root@k8s-master01 metrics-server-0.4.x]# kubectl create -f .
# 执行结果
serviceaccount/metrics-server created
clusterrole.rbac.authorization.k8s.io/system:aggregated-metrics-reader created
clusterrole.rbac.authorization.k8s.io/system:metrics-server created
rolebinding.rbac.authorization.k8s.io/metrics-server-auth-reader created
clusterrolebinding.rbac.authorization.k8s.io/metrics-server:system:auth-delegator created
clusterrolebinding.rbac.authorization.k8s.io/system:metrics-server created
service/metrics-server created
deployment.apps/metrics-server created
apiservice.apiregistration.k8s.io/v1beta1.metrics.k8s.io created
14.2、等待metrics server启动然后查看状态
[root@k8s-master01 ~]# kubectl top node
NAME CPU(cores) CPU% MEMORY(bytes) MEMORY%
k8s-master01 384m 19% 1110Mi 59%
k8s-master02 334m 16% 1086Mi 58%
k8s-master03 324m 16% 1043Mi 55%
k8s-node01 208m 10% 573Mi 30%
k8s-node02 180m 9% 534Mi 28%
十五、安装dashboard
Dashboard用于展示集群中的各类资源，同时也可以通过Dashboard实时查看Pod的日志和在容器中执行一些命令等。
15.1、安装指定版本dashboard
[root@k8s-master01 ~]# cd /root/k8s-ha-install/dashboard/
[root@k8s-master01 dashboard]# kubectl create -f .
serviceaccount/admin-user created
clusterrolebinding.rbac.authorization.k8s.io/admin-user created
namespace/kubernetes-dashboard created
serviceaccount/kubernetes-dashboard created
service/kubernetes-dashboard created
secret/kubernetes-dashboard-certs created
secret/kubernetes-dashboard-csrf created
secret/kubernetes-dashboard-key-holder created
configmap/kubernetes-dashboard-settings created
role.rbac.authorization.k8s.io/kubernetes-dashboard created
clusterrole.rbac.authorization.k8s.io/kubernetes-dashboard created
rolebinding.rbac.authorization.k8s.io/kubernetes-dashboard created
clusterrolebinding.rbac.authorization.k8s.io/kubernetes-dashboard created
deployment.apps/kubernetes-dashboard created
service/dashboard-metrics-scraper created
deployment.apps/dashboard-metrics-scraper created
15.2、安装最新版
# 官方GitHub地址：https://github.com/kubernetes/dashboard
# 可以在官方dashboard查看到最新版dashboard
kubectl apply -f https://raw.githubusercontent.com/kubernetes/dashboard/v2.0.3/aio/deploy/recommended.yaml
# 创建管理员用户vim admin.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
name: admin-user
namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
name: admin-user
annotations:
rbac.authorization.kubernetes.io/autoupdate: "true"
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: cluster-admin
subjects:
- kind: ServiceAccount
name: admin-user
namespace: kube-system
# 安装
kubectl apply -f admin.yaml -n kube-system
15.3、登录dashboard
# 更改dashboard的svc为NodePort
[root@k8s-master01 ~]# kubectl edit svc kubernetes-dashboard -n kubernetes-dashboard
将ClusterIP更改为NodePort
# 查看端口号
[root@k8s-master01 ~]# kubectl get svc kubernetes-dashboard -n kubernetes-dashboard
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes-dashboard NodePort 10.96.77.112 <none> 443:30902/TCP 4m10s
# 根据自己的实例端口号，通过任意安装了kube-proxy的宿主机或者VIP的IP+端口即可访问到dashboard
页面访问：https://192.168.1.246:30902/
15.4、查看token值
[root@k8s-master01 ~]# kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep admin-user | awk '{print $1}')
十六、集群验证
16.1、安装busybox（master01上）
cat<<EOF | kubectl apply -f -
apiVersion: v1
kind: Pod
metadata:
name: busybox
namespace: default
spec:
containers:
- name: busybox
image: busybox:1.28
command:
- sleep
- "3600"
imagePullPolicy: IfNotPresent
restartPolicy: Always
EOF
16.2、验证步骤（matser01上）
1. Pod必须能解析Service
2. Pod必须能解析跨namespace的Service
3. 每个节点都必须要能访问Kubernetes的kubernetes svc 443和kube-dns的service 53
4. Pod和Pod之前要能通
a) 同namespace能通信
b) 跨namespace能通信
c) 跨机器能通信
16.3、步骤演示（matser01上）
# 首先查看po是否安装成功
[root@k8s-master01 ~]# kubectl get po
NAME READY STATUS RESTARTS AGE
busybox 1/1 Running 0 3m11s
# 查看svc是否正常
[root@k8s-master01 ~]# kubectl get svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 163m
# 查看Pod是否能能解析Service
[root@k8s-master01 ~]# kubectl exec busybox -n default -- nslookup kubernetes
Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local
Name: kubernetes
Address 1: 10.96.0.1 kubernetes.default.svc.cluster.local
# 查看Pod是否能解析跨namespace的Service
[root@k8s-master01 ~]# kubectl exec busybox -n default -- nslookup kube-dns.kube-system
Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local
Name: kube-dns.kube-system
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local
# 跟我以上结果一致就成功了
16.4、使用telnet命令验证
# 所有节点安装telnet命令,有的话忽略
yum install -y telnet
# 所有机器 10.96.0.1 443 kubernetes svc 443
# 所有机器 10.96.0.10 53 kube-dns的service 53
# 不会自动断开就是成功了
telnet 10.96.0.1 443
telnet 10.96.0.10 53
Trying 10.96.0.1...
Connected to 10.96.0.1.
Escape character is '^]'.
16.5、使用curl命令验证（所有机器）
[root@k8s-master01 ~]# curl 10.96.0.10:53
curl: (52) Empty reply from server
16.6、容器验证（master01上）
[root@k8s-master01 ~]# kubectl get po -n kube-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-5f6d4b864b-pq2qw 1/1 Running 0 62m
calico-node-75blv 1/1 Running 0 62m
calico-node-hw27b 1/1 Running 0 62m
calico-node-k2wdf 1/1 Running 0 62m
calico-node-l58lz 1/1 Running 0 62m
calico-node-v2qlq 1/1 Running 0 62m
coredns-867d46bfc6-8vzrk 1/1 Running 0 72m
metrics-server-595f65d8d5-kgn8c 1/1 Running 0 60m
[root@k8s-master01 ~]# kubectl get po -n kube-system -owide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
calico-kube-controllers-5f6d4b864b-pq2qw 1/1 Running 0 63m 192.168.1.100 k8s-master01 <none> <none>
calico-node-75blv 1/1 Running 0 63m 192.168.1.103 k8s-node01 <none> <none>
calico-node-hw27b 1/1 Running 0 63m 192.168.1.101 k8s-master02 <none> <none>
calico-node-k2wdf 1/1 Running 0 63m 192.168.1.100 k8s-master01 <none> <none>
calico-node-l58lz 1/1 Running 0 63m 192.168.1.102 k8s-master03 <none> <none>
calico-node-v2qlq 1/1 Running 0 63m 192.168.1.104 k8s-node02 <none> <none>
coredns-867d46bfc6-8vzrk 1/1 Running 0 73m 172.161.125.2 k8s-node01 <none> <none>
metrics-server-595f65d8d5-kgn8c 1/1 Running 0 62m 172.161.125.1 k8s-node01 <none> <none>
# 能进去就ok
[root@k8s-master01 ~]# kubectl exec -it calico-node-v2qlq -n kube-system -- sh
sh-4.4#
# 进入node01，然后能ping通node02就行
[root@k8s-master01 ~]# kubectl exec -it calico-node-v2qlq -n kube-system -- bash
[root@k8s-node02 /]# ping 192.168.1.104
PING 192.168.1.104 (192.168.1.104) 56(84) bytes of data.
64 bytes from 192.168.1.104: icmp_seq=1 ttl=64 time=0.123 ms
64 bytes from 192.168.1.104: icmp_seq=2 ttl=64 time=0.090 ms
^C
--- 192.168.1.104 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 46ms
rtt min/avg/max/mdev = 0.090/0.106/0.123/0.019 ms
十七、生产环境关键性配置
17.1、关键性配置请参考视频，不要直接配置！
# 所有节点都改
vim /etc/docker/daemon.json
{ "registry-mirrors": [
"https://registry.docker-cn.com",
"http://hub-mirror.c.163.com",
"https://docker.mirrors.ustc.edu.cn"
],
"exec-opts": ["native.cgroupdriver=systemd"],
"max-concurrent-downloads": 10, "max-concurrent-uploads": 5, "log-opts": { "max-size": "300m", "max-file": "2" }, "live-restore": true }
max-concurrent-downloads # 下载并发数
max-concurrent-uploads # 上传并发数
max-size # 日志文件最大到多少切割 （此处是300m）
max-file # 日志文件保留个数 （此处是2个）
live-restore # 开启这个参数，重启docker不会影响上面的参数
# 所有节点改完重启docker
systemctl daemon-reload && systemctl restart docker
vim /usr/lib/systemd/system/kube-controller-manager.service
# 找个位置加上,在三个master节点
--experimental-cluster-signing-duration=876000h0m0s
# 改完重启
systemctl daemon-reload && systemctl restart kube-controller-manager
# 所有节点，更换成以下的配置文件
[root@k8s-node02 ~]# cat /etc/systemd/system/kubelet.service.d/10-kubelet.conf
[Service]
Environment="KUBELET_KUBECONFIG_ARGS=--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig --kubeconfig=/etc/kubernetes/kubelet.kubeconfig"
Environment="KUBELET_SYSTEM_ARGS=--network-plugin=cni --cni-conf-dir=/etc/cni/net.d --cni-bin-dir=/opt/cni/bin"
Environment="KUBELET_CONFIG_ARGS=--config=/etc/kubernetes/kubelet-conf.yml --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause-amd64:3.2"
Environment="KUBELET_EXTRA_ARGS=--node-labels=node.kubernetes.io/node='' --tls-cipher-suites=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 --image-pull-progress-deadline=30m "
ExecStart=
ExecStart=/usr/local/bin/kubelet $KUBELET_KUBECONFIG_ARGS $KUBELET_CONFIG_ARGS $KUBELET_SYSTEM_ARGS $KUBELET_EXTRA_ARGS
# 所有节点、添加如下配置----- 注意请更具生成环境配置
vim /etc/kubernetes/kubelet-conf.yml
rotateServerCertificates: true
allowedUnsafeSysctls:
- "net.core*"
- "net.ipv4.*"
kubeReserved:
cpu: "10m"
memory: 10Mi
ephemeral-storage: 10Mi
systemReserved:
cpu: "1"
memory: 20Mi
ephemeral-storage: 1Gi
# 改完重启
systemctl daemon-reload && systemctl restart kubelet
# 查看日志没报错就行
[root@k8s-master01 ~]# tail -f /var/log/messages
# 角色名字更改
[root@k8s-master01 ~]# kubectl label node k8s-master01 node-role.kubernetes.io/matser=''
node/k8s-master01 labeled
[root@k8s-master01 ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-master01 Ready matser 129m v1.20.0 # 成功更改
k8s-master02 Ready <none> 129m v1.20.0
k8s-master03 Ready <none> 129m v1.20.0
k8s-node01 Ready <none> 129m v1.20.0
k8s-node02 Ready <none> 129m v1.20.0
18、安装总结
1、 kubeadm
2、 二进制
3、 自动化安装
a) Ansible
i. Master节点安装不需要写自动化。
ii. 添加Node节点，playbook。
4、 安装需要注意的细节
a) 上面的细节配置
b) 生产环境中etcd一定要和系统盘分开，一定要用ssd硬盘。
c) Docker数据盘也要和系统盘分开，有条件的话可以使用ssd硬盘