• hdu5489 Removed Interval


    Time Limit: 4000/2000 MS (Java/Others)    Memory Limit: 65536/65536 K (Java/Others)
    Total Submission(s): 757    Accepted Submission(s): 282


    Problem Description
    Given a sequence of numbers A=a1,a2,,aN, a subsequence b1,b2,,bk of A is referred as increasing if b1<b2<<bk. LY has just learned how to find the longest increasing subsequence (LIS).
    Now that he has to select L consecutive numbers and remove them from A for some mysterious reasons. He can choose arbitrary starting position of the selected interval so that the length of the LIS of the remaining numbers is maximized. Can you help him with this problem?
     

    Input
    The first line of input contains a number T indicating the number of test cases (T100).
    For each test case, the first line consists of two numbers N and L as described above (1N100000,0LN). The second line consists of N integers indicating the sequence. The absolute value of the numbers is no greater than 109.
    The sum of N over all test cases will not exceed 500000.
     

    Output
    For each test case, output a single line consisting of “Case #X: Y”. X is the test case number starting from 1. Y is the maximum length of LIS after removing the interval.
     

    Sample Input
    2 5 2 1 2 3 4 5 5 3 5 4 3 2 1
     

    Sample Output
    Case #1: 3

    Case #2: 1

    这题想了很长时间,题意是求切去长度为l的连续子序列后,剩下的序列的最长上升子序列,切的起始位置随意定。

    可以记录两个函数

    f[i]:以a[i]为尾端的lis的最大长度。

    g[i]:以a[i]为起始点的lis的最大长度。两者都包含a[i]。

    这样对于每一个点,我们可以根据i, 找到 [0,i−L−1]之间的一个值,使得这个值小于a[i],且长度最大,可以用线段树来维护。然后用maxx=max(maxx,ans+g[i]),即前半段加上后半段就行了。

    #include<iostream>
    #include<stdio.h>
    #include<stdlib.h>
    #include<string.h>
    #include<math.h>
    #include<vector>
    #include<map>
    #include<set>
    #include<queue>
    #include<stack>
    #include<string>
    #include<algorithm>
    using namespace std;
    #define maxn 100060
    int f[maxn],g[maxn],pos[maxn],a[maxn],c[maxn],a1[maxn],h[maxn];
    struct node{
        int l,r,maxnum;
    }b[4*maxn];
    
    void build(int l,int r,int i)
    {
        int mid;
        b[i].l=l;b[i].r=r;b[i].maxnum=0;
        if(l==r)return;
        mid=(l+r)/2;
        build(l,mid,i*2);
        build(mid+1,r,i*2+1);
    }
    
    void update(int idx,int num,int i)
    {
        int mid;
        if(b[i].l==idx && b[i].r==idx){
            b[i].maxnum=max(b[i].maxnum,num);return;
        }
        mid=(b[i].l+b[i].r)/2;
        if(idx<=mid)update(idx,num,i*2);
        else update(idx,num,i*2+1);
        b[i].maxnum=max(b[i*2].maxnum,b[i*2+1].maxnum);
    }
    
    int question(int l,int r,int i)
    {
        int mid;
        if(l>r)return 0;
        if(b[i].l==l && b[i].r==r){
            return b[i].maxnum;
        }
        mid=(b[i].l+b[i].r)/2;
        if(r<=mid) return question(l,r,i*2);
        else if(l>mid)return question(l,r,i*2+1);
        else{
            int lv=question(l,mid,i*2);
            int rv=question(mid+1,r,i*2+1);
            return max(lv,rv);
        }
    
    }
    
    int main()
    {
        int n,m,i,j,T,l,tot,len,maxx,ans,num1=0,k;
        scanf("%d",&T);
        while(T--)
        {
            scanf("%d%d",&n,&l);
            tot=0;
            for(i=1;i<=n;i++){
                scanf("%d",&a[i]);
                pos[i]=a[i];
            }
            sort(pos+1,pos+1+n);
            tot=unique(pos+1,pos+1+n)-pos-1;
            for(i=1;i<=n;i++)a[i]=lower_bound(pos+1,pos+1+tot,a[i])-pos;
            f[1]=1;len=1;c[1]=a[1];
            for(i=2;i<=n;i++){
                if(a[i]>c[len]){
                    len++;f[i]=len;
                    c[len]=a[i];continue;
                }
                j=lower_bound(c+1,c+1+len,a[i])-c;
                c[j]=a[i];
                f[i]=j; //这里很重要,是j,不是len,因为求的是以a[i]为结尾的最长长度,不是前i个的最长长度
            }
    
            for(i=1;i<=n;i++){
                a1[i]=-a[n+1-i];
            }
    
            g[1]=1;len=1;c[1]=a1[1];
            for(i=2;i<=n;i++){
                if(a1[i]>c[len]){
                    len++;g[i]=len;
                    c[len]=a1[i];continue;
                }
                j=lower_bound(c+1,c+1+len,a1[i])-c;
                c[j]=a1[i];
                g[i]=j;
            }
            reverse(g+1,g+1+n);
    
            build(1,100000,1);
            maxx=0;
            for(i=l+1;i<=n;i++){
                ans=question(1,a[i]-1,1);
                update(a[i-l],f[i-l],1);
                maxx=max(maxx,ans+g[i]);
            }
            if(n-l>=1){
                maxx=max(maxx,f[n-l]);
            }
            num1++;
            printf("Case #%d: %d
    ",num1,maxx);
        }
        return 0;
    }
    /*
    2
    10 2
    1 2 3 9 8 7 4 5 6 7
    */
    

     
  • 相关阅读:
    学习笔记-Python基础4-九九乘法表练习
    学习笔记-Python基础4-函数
    学习笔记-Python基础3-程序结构:顺序、分支、循环
    JS根据获取的navigator.userAgent,判断用户打开页面的终端
    代理模式,CGLIB 与Spring AOP实现原理
    ueditor不过滤保存html
    ecstore 新增input控件方法
    ecstore前台模板保留css样式
    ecstore 当前网址
    mysql 导入数据过大报错
  • 原文地址:https://www.cnblogs.com/herumw/p/9464647.html
Copyright © 2020-2023  润新知