• Android 耳机插入过程分析


    Android 耳机插入过程分析

    参考链接:
    https://www.jianshu.com/p/d82a8dabb3e7
    
    初始化:
    10-26 07:40:43.932  1414  1414 I SystemServer: StartWiredAccessoryManager
    10-26 07:40:43.936  1414  1414 W WiredAccessoryManager: This kernel does not have usb audio support
    10-26 07:40:43.937  1414  1414 W WiredAccessoryManager: This kernel does not have HDMI audio support
    10-26 07:40:43.937  1414  1414 W WiredAccessoryManager: This kernel does not have DP audio support
    10-26 07:40:43.937  1414  1414 D SystemServerTiming: StartWiredAccessoryManager took to complete: 6ms
    10-26 07:40:46.375  1414  1414 V WiredAccessoryManager: notifyWiredAccessoryChanged: when=0 bits= mask=54
    10-26 07:40:46.375  1414  1414 V WiredAccessoryManager: newName=h2w newState=0 headsetState=0 prev headsetState=0
    10-26 07:40:46.375  1414  1414 E WiredAccessoryManager: No state change.
    10-26 07:40:46.375  1414  1414 V WiredAccessoryManager: init()
    
    耳机插入
    10-26 11:26:48.552  1414  1684 V WiredAccessoryManager: notifyWiredAccessoryChanged: when=13604972191000 bits=SW_HEADPHONE_INSERT SW_MICROPHONE_INSERT mask=94
    10-26 11:26:48.552  1414  1684 V WiredAccessoryManager: newName=h2w newState=1 headsetState=1 prev headsetState=0
    10-26 11:26:48.554  1414  1684 I WiredAccessoryManager: MSG_NEW_DEVICE_STATE
    10-26 11:26:48.555  1414  1414 V WiredAccessoryManager: headsetName:  connected
    
    耳机拔出
    10-26 11:26:53.134  1414  1684 V WiredAccessoryManager: notifyWiredAccessoryChanged: when=13609554723000 bits= mask=94
    10-26 11:26:53.134  1414  1684 V WiredAccessoryManager: newName=h2w newState=0 headsetState=0 prev headsetState=1
    10-26 11:26:53.136  1414  1684 I WiredAccessoryManager: MSG_NEW_DEVICE_STATE
    10-26 11:26:53.137  1414  1414 V WiredAccessoryManager: headsetName:  disconnected
    
    
    高通读取外设插入方式有两种:
    1. UEvent:
    读取/sys/class/switch/h2w/state文件等状态
    2. InputEvent:
    读取/dev/input/event
    
    通过属性值,判断采用何种方式。
    frameworksasecore
    es
    esvaluesconfig.xml
    <bool name="config_useDevInputEventForAudioJack">true</bool>
    
    getevent
    add device 1: /dev/input/event7
      name:     "msm8953-snd-card-mtp Button Jack"
    add device 2: /dev/input/event6
      name:     "msm8953-snd-card-mtp Headset Jack"
    add device 3: /dev/input/event2
      name:     "goodix-ts"
    add device 4: /dev/input/event3
      name:     "hbtp_vm"
    could not get driver version for /dev/input/mouse0, Not a typewriter
    add device 5: /dev/input/event0
      name:     "qpnp_pon"
    could not get driver version for /dev/input/mice, Not a typewriter
    add device 6: /dev/input/event1
      name:     "tsu6721"
    add device 7: /dev/input/event4
      name:     "keyremap_virtual"
    add device 8: /dev/input/event5
      name:     "gpio-keys"
      
    插入:
    /dev/input/event6: 0005 0002 00000001
    /dev/input/event6: 0005 0004 00000001
    /dev/input/event6: 0005 0007 00000001
    /dev/input/event6: 0000 0000 00000000
    
    拔出:
    /dev/input/event6: 0005 0002 00000000
    /dev/input/event6: 0005 0004 00000000
    /dev/input/event6: 0005 0007 00000000
    /dev/input/event6: 0000 0000 00000000
    
    getevent -l
    /dev/input/event6: EV_SW        SW_HEADPHONE_INSERT  00000001
    /dev/input/event6: EV_SW        SW_MICROPHONE_INSERT 00000001
    /dev/input/event6: EV_SW        SW_JACK_PHYSICAL_INS 00000001
    /dev/input/event6: EV_SYN       SYN_REPORT           00000000
    
    /dev/input/event6: EV_SW        SW_HEADPHONE_INSERT  00000000
    /dev/input/event6: EV_SW        SW_MICROPHONE_INSERT 00000000
    /dev/input/event6: EV_SW        SW_JACK_PHYSICAL_INS 00000000
    /dev/input/event6: EV_SYN       SYN_REPORT           00000000
    
    代码跟踪
    frameworksaseservicescorejavacomandroidserverinputInputManagerService.java
    mUseDevInputEventForAudioJack =
                    context.getResources().getBoolean(R.bool.config_useDevInputEventForAudioJack);
    				
    
            if (mUseDevInputEventForAudioJack && (switchMask & SW_JACK_BITS) != 0) {
                mWiredAccessoryCallbacks.notifyWiredAccessoryChanged(whenNanos, switchValues,
                        switchMask);
            }
    			
    frameworksaseservicescorejavacomandroidserverWiredAccessoryManager.java
        public void notifyWiredAccessoryChanged(long whenNanos, int switchValues, int switchMask) {
            if (LOG) Slog.v(TAG, "notifyWiredAccessoryChanged: when=" + whenNanos
                    + " bits=" + switchCodeToString(switchValues, switchMask)
                    + " mask=" + Integer.toHexString(switchMask));
    
            synchronized (mLock) {
                int headset;
                mSwitchValues = (mSwitchValues & ~switchMask) | switchValues;
                switch (mSwitchValues &
                    (SW_HEADPHONE_INSERT_BIT | SW_MICROPHONE_INSERT_BIT | SW_LINEOUT_INSERT_BIT)) {
                    case 0:
                        headset = 0;
                        break;
    
                    case SW_HEADPHONE_INSERT_BIT:
                        headset = BIT_HEADSET_NO_MIC;
                        break;
    
                    case SW_LINEOUT_INSERT_BIT:
                        headset = BIT_LINEOUT;
                        break;
    
                    case SW_HEADPHONE_INSERT_BIT | SW_MICROPHONE_INSERT_BIT:
                        headset = BIT_HEADSET;
                        break;
    
                    case SW_MICROPHONE_INSERT_BIT:
                        headset = BIT_HEADSET;
                        break;
    
                    default:
                        headset = 0;
                        break;
                }
    
                updateLocked(NAME_H2W,
                    (mHeadsetState & ~(BIT_HEADSET | BIT_HEADSET_NO_MIC | BIT_LINEOUT)) | headset);
            }
        }
    		
        private void updateLocked(String newName, int newState) {
            // Retain only relevant bits
            int headsetState = newState & SUPPORTED_HEADSETS;
            int usb_headset_anlg = headsetState & BIT_USB_HEADSET_ANLG;
            int usb_headset_dgtl = headsetState & BIT_USB_HEADSET_DGTL;
            int h2w_headset = headsetState & (BIT_HEADSET | BIT_HEADSET_NO_MIC | BIT_LINEOUT);
            boolean h2wStateChange = true;
            boolean usbStateChange = true;
            if (LOG) Slog.v(TAG, "newName=" + newName
                    + " newState=" + newState
                    + " headsetState=" + headsetState
                    + " prev headsetState=" + mHeadsetState);
    
            if (mHeadsetState == headsetState) {
                Log.e(TAG, "No state change.");
                return;
            }
    
            // reject all suspect transitions: only accept state changes from:
            // - a: 0 headset to 1 headset
            // - b: 1 headset to 0 headset
            if (h2w_headset == (BIT_HEADSET | BIT_HEADSET_NO_MIC | BIT_LINEOUT)) {
                Log.e(TAG, "Invalid combination, unsetting h2w flag");
                h2wStateChange = false;
            }
            // - c: 0 usb headset to 1 usb headset
            // - d: 1 usb headset to 0 usb headset
            if (usb_headset_anlg == BIT_USB_HEADSET_ANLG && usb_headset_dgtl == BIT_USB_HEADSET_DGTL) {
                Log.e(TAG, "Invalid combination, unsetting usb flag");
                usbStateChange = false;
            }
            if (!h2wStateChange && !usbStateChange) {
                Log.e(TAG, "invalid transition, returning ...");
                return;
            }
    
            mWakeLock.acquire();
            // 发送数据给
            Log.i(TAG, "MSG_NEW_DEVICE_STATE");
            Message msg = mHandler.obtainMessage(MSG_NEW_DEVICE_STATE, headsetState,
                    mHeadsetState, "");
            mHandler.sendMessage(msg);
    
            mHeadsetState = headsetState;
        }
    
        private final Handler mHandler = new Handler(Looper.myLooper(), null, true) {
            @Override
            public void handleMessage(Message msg) {
                switch (msg.what) {
                    case MSG_NEW_DEVICE_STATE:
                        setDevicesState(msg.arg1, msg.arg2, (String)msg.obj);
                        mWakeLock.release();
                        break;
                    case MSG_SYSTEM_READY:
                        onSystemReady();
                        mWakeLock.release();
                        break;
                }
            }
        };
    
        private void setDevicesState(
                int headsetState, int prevHeadsetState, String headsetName) {
            synchronized (mLock) {
                int allHeadsets = SUPPORTED_HEADSETS;
                for (int curHeadset = 1; allHeadsets != 0; curHeadset <<= 1) {
                    if ((curHeadset & allHeadsets) != 0) {
                        setDeviceStateLocked(curHeadset, headsetState, prevHeadsetState, headsetName);
                        allHeadsets &= ~curHeadset;
                    }
                }
            }
        }
    
        private void setDeviceStateLocked(int headset,
                int headsetState, int prevHeadsetState, String headsetName) {
            if ((headsetState & headset) != (prevHeadsetState & headset)) {
                int outDevice = 0;
                int inDevice = 0;
                int state;
    
                if ((headsetState & headset) != 0) {
                    state = 1;
                } else {
                    state = 0;
                }
    
                if (headset == BIT_HEADSET) {
                    outDevice = AudioManager.DEVICE_OUT_WIRED_HEADSET;
                    inDevice = AudioManager.DEVICE_IN_WIRED_HEADSET;
                } else if (headset == BIT_HEADSET_NO_MIC){
                    outDevice = AudioManager.DEVICE_OUT_WIRED_HEADPHONE;
                } else if (headset == BIT_LINEOUT){
                    outDevice = AudioManager.DEVICE_OUT_LINE;
                } else if (headset == BIT_USB_HEADSET_ANLG) {
                    outDevice = AudioManager.DEVICE_OUT_ANLG_DOCK_HEADSET;
                } else if (headset == BIT_USB_HEADSET_DGTL) {
                    outDevice = AudioManager.DEVICE_OUT_DGTL_DOCK_HEADSET;
                } else if (headset == BIT_HDMI_AUDIO) {
                    outDevice = AudioManager.DEVICE_OUT_HDMI;
                } else {
                    Slog.e(TAG, "setDeviceState() invalid headset type: "+headset);
                    return;
                }
    
                if (LOG) {
                    Slog.v(TAG, "headsetName: " + headsetName +
                            (state == 1 ? " connected" : " disconnected"));
                }
        	    // 发送给audio manager.
                if (outDevice != 0) {
                  mAudioManager.setWiredDeviceConnectionState(outDevice, state, "", headsetName);
                }
                if (inDevice != 0) {
                  mAudioManager.setWiredDeviceConnectionState(inDevice, state, "", headsetName);
                }
            }
        }
    
  • 相关阅读:
    HTML的基本骨架
    2017.7.27
    2017.7.26
    2017.7.25
    2017.7.24
    2017.7.22
    2017.7.21
    Javascript Step by Step
    Javascript Step by Step
    Javascript Step by Step
  • 原文地址:https://www.cnblogs.com/helloworldtoyou/p/9868890.html
Copyright © 2020-2023  润新知