• 使用Matlab调取股票历史数据


    function stocks = hist_stock_data(start_date, end_date, varargin)
    % HIST_STOCK_DATA     Obtain historical stock data
    %   hist_stock_data(X,Y,'Ticker1','Ticker2',...) retrieves historical stock
    %   data for the ticker symbols Ticker1, Ticker2, etc... between the dates
    %   specified by X and Y.  X and Y can either be strings in the format
    %   ddmmyyyy or Matlab datenums, where X is the beginning date and Y is the
    %   ending date.  The program returns the stock data in a structure giving
    %   the Date, Open, High, Low, Close, Volume, and Adjusted Close price
    %   adjusted for dividends and splits.
    %
    %   hist_stock_data(X,Y,'tickers.txt') retrieves historical stock data
    %   using the ticker symbols found in the user-defined text file.  Ticker
    %   symbols must be separated by line feeds.
    %
    %   hist_stock_data(X,Y,{'Ticker1' 'Ticker2'}) combined the ticker symbols
    %   into a single cell array when calling hist_stock_data (sometimes easier
    %   for calling the funtion with a cell array of ticker symbols).
    %
    %   hist_stock_data(X,Y,'Ticker1','frequency',FREQ) retrieves historical
    %   stock data using the frequency specified by FREQ, which must be either
    %   'd' for daily, 'wk' for weekly, or 'mo' for monthly.
    %
    %   hist_stock_data(X,Y,'Ticker1','type','div') retrieves dividend data. If
    %   anything but 'div' is specified then it will default to retrieving
    %   historical prices.
    %
    %   EXAMPLES
    %       stocks = hist_stock_data('23012003','15042008','GOOG','C');
    %           Returns the structure array 'stocks' that holds historical
    %           stock data for Google and CitiBank for dates from January
    %           23, 2003 to April 15, 2008.
    %
    %       stocks = hist_stock_data('12101997','18092001','tickers.txt');
    %           Returns the structure arrary 'stocks' which holds historical
    %           stock data for the ticker symbols listed in the text file
    %           'tickers.txt' for dates from October 12, 1997 to September 18,
    %           2001.  The text file must be a column of ticker symbols
    %           separated by new lines.
    %
    %       stocks = hist_stock_data(now-10, now, {'GOOG' 'C'});
    %           Get stock data for approximately the last 10 days for the two
    %           tickers specified in the cell array.
    %
    %       stocks = hist_stock_data('12101997','18092001','C','frequency','w')
    %           Returns historical stock data for Citibank using the date range
    %           specified with a frequency of weeks.  Possible values for
    %           frequency are d (daily), wk (weekly), or mo (monthly).  If not
    %           specified, the default frequency is daily.
    %
    %       stocks = hist_stock_data('12101997','18092001','C','type','div')
    %            Returned historical dividend data for Citibank between Oct 12,
    %            1997 and September 18, 2001.
    %
    %   DATA STRUCTURE
    %       INPUT           DATA STRUCTURE      FORMAT
    %       X (start date)  ddmmyyyy            String
    %       Y (end date)    ddmmyyyy            String
    %       Ticker          NA                  String 
    %       ticker.txt      NA                  Text file
    %       FREQ            NA                  String; 'd', 'wk', or 'mo'
    %       TYPE            NA                  String; 'div'
    %
    %   OUTPUT FORMAT
    %       All data is output in the structure 'stocks'.  Each structure
    %       element will contain the ticker name, then vectors consisting of
    %       the organized data sorted by date, followed by the Open, High, Low,
    %       Close, Volume, then Adjusted Close prices.
    %
    %   DATA FEED
    %       The historical stock data is obtained using Yahoo! Finance website.
    %       By using Yahoo! Finance, you agree not to redistribute the
    %       information found therein.  Therefore, this program is for personal
    %       use only, and any information that you obtain may not be
    %       redistributed.
    %
    %   NOTE
    %       This program uses the Matlab command urlread in a very basic form.
    %       If the program gives you an error and does not retrieve the stock
    %       information, it is most likely because there is a problem with the
    %       urlread command.  You may have to tweak the code to let the program
    %       connect to the internet and retrieve the data.
    
    stocks = struct([]); % initialize data structure %% Parse inputs % Format start and end dates into Posix times. This is the number of % seconds since Jan 1, 1970. This previously used the posixtime function, % but since that is relatively new, it now does the calculation using % Matlab datenum's, which are in units of days, then converting to seconds. origDate = datenum('01-Jan-1970 00:00:00', 'dd-mmm-yyyy HH:MM:SS'); % Convert input dates to Matlab datenums, if necessary if ischar(start_date) startDate = (datenum(start_date, 'ddmmyyyy') - origDate) * 24 * 60 * 60; else startDate = (floor(start_date) - origDate) * 24 * 60 * 60; end if ischar(end_date) endDate = (datenum(end_date, 'ddmmyyyy') - origDate) * 24 * 60 * 60; else endDate = (floor(end_date) - origDate) * 24 * 60 * 60; end % determine if user specified frequency temp = find(strcmp(varargin,'frequency') == 1); % search for frequency if isempty(temp) % if not given freq = 'd'; % default is daily else % if user supplies frequency freq = varargin{temp+1}; % assign to user input varargin(temp:temp+1) = []; % remove from varargin end clear temp % determine if user specified event type temp = find(strcmp(varargin,'type') == 1); % search for frequency if isempty(temp) % if not given event = 'history'; % default is historical prices else % if user supplies frequency event = varargin{temp+1}; % assign to user input varargin(temp:temp+1) = []; % remove from varargin end clear temp % If the first cell of varargin is itself a cell array, assume it is a cell % array of ticker symbols if iscell(varargin{1}) tickers = varargin{1}; % Otherwise, check to see if it's a .txt file elseif ~isempty(strfind(varargin{1},'.txt')) fid = fopen(varargin{1}, 'r'); tickers = textscan(fid, '%s'); tickers = tickers{:}; fclose(fid); % Otherwise, assume it's either a single ticker or a list of tickers else tickers = varargin; end %% Get historical data h = waitbar(0, 'Please Wait...'); % create waitbar idx = 1; % idx for current stock data % Cycle through each ticker symbol and retrieve historical data for i = 1:length(tickers) % Update waitbar to display current ticker waitbar((i-1)/length(tickers), h, ... sprintf('Retrieving stock data for %s (%0.2f%%)', ... tickers{i}, (i-1)*100/length(tickers))) % Create url string for retrieving data url = sprintf(['https://query1.finance.yahoo.com/v7/finance/download/', ... '%s?period1=%d&period2=%d&interval=1%s&events=%s&crumb=dqdli/qZEvR'], ... tickers{i}, startDate, endDate, freq, event); % Call data from Yahoo Finance [temp, status] = urlread(url,'post',{'matlabstockdata@yahoo.com', 'historical stocks'}); % If data was downloaded successfully, then proceed to process it. % Otherwise, ignore this ticker symbol if status % Put data into appropriate variables if strcmp(event, 'history') % If historical prices % Parse out the historical data data = textscan(temp, '%s%f%f%f%f%f%f', 'delimiter', ',', ... 'Headerlines', 1); [stocks(idx).Date, stocks(idx).Open, stocks(idx).High, ... stocks(idx).Low, stocks(idx).Close, ... stocks(idx).AdjClose, stocks(idx).Volume] = deal(data{:}); % If dividends else % Parse out the dividend data data = textscan(temp, '%s%f', 'delimiter', ',', ... 'Headerlines', 1); [stocks(idx).Date, stocks(idx).Dividend] = deal(data{:}); end stocks(idx).Ticker = tickers{i}; % Store ticker symbol idx = idx + 1; % Increment stock index end % update waitbar waitbar(i/length(tickers),h) end close(h) % close waitbar

      公司名称为对应公司的NYSE(New York Stock Exchange纽约证券交易所)的编号,比如McDonald: MCD, Google:GOOG

    原作者:Josiah Renfree(2008)

  • 相关阅读:
    field_automation源码分析
    uvm设计分析——field automation
    uvm设计分析——tlm
    gedit emacs
    C语言---数据结构(内建,数组,自定义)
    C语言---选择结构和循环结构
    C语言---变量与函数
    C语言---指针
    C语言--函数
    009-多线程-锁-JUC锁-Semaphore 信号量【控制一定数量的许可(permit)的方式,来达到限制通用资源访问的目的】
  • 原文地址:https://www.cnblogs.com/hanani/p/10068874.html
Copyright © 2020-2023  润新知