• linux 系统优化


    net.ipv4.tcp_fin_timeout = 2
    net.ipv4.tcp_tw_reuse = 1
    net.ipv4.tcp_tw_recycle = 1
    net.ipv4.tcp_syncookies = 1
    net.ipv4.tcp_keepalive_time = 600
    net.ipv4.ip_local_port_range = 4000    65000
    net.ipv4.tcp_max_syn_backlog = 16384
    net.ipv4.tcp_max_tw_buckets = 36000
    net.ipv4.route.gc_timeout = 100
    net.ipv4.tcp_syn_retries = 1
    net.ipv4.tcp_synack_retries = 1
    net.core.somaxconn = 16384
    net.core.netdev_max_backlog = 16384
    net.ipv4.tcp_max_orphans = 16384
    net.ipv4.ip_forward = 1
    net.ipv4.icmp_echo_ignore_all=1

    #CTCDN系统优化参数
    #关闭ipv6
    net.ipv6.conf.all.disable_ipv6 = 1
    net.ipv6.conf.default.disable_ipv6 = 1
    #决定检查过期多久邻居条目
    net.ipv4.neigh.default.gc_stale_time=120
    #使用arp_announce / arp_ignore解决ARP映射问题
    net.ipv4.conf.default.arp_announce = 2
    net.ipv4.conf.all.arp_announce=2
    net.ipv4.conf.lo.arp_announce=2 # 避免放大
    net.ipv4.icmp_echo_ignore_broadcasts = 1 # 开启恶意icmp错误消息保护
    net.ipv4.icmp_ignore_bogus_error_responses = 1
    #关闭路由转发

    #关闭路由转发
    net.ipv4.ip_forward = 0
    net.ipv4.conf.all.send_redirects = 0
    net.ipv4.conf.default.send_redirects = 0
    #开启反向路径过滤
    net.ipv4.conf.all.rp_filter = 1
    net.ipv4.conf.default.rp_filter = 1
    #处理无源路由的包
    net.ipv4.conf.all.accept_source_route = 0
    net.ipv4.conf.default.accept_source_route = 0
    #关闭sysrq功能
    kernel.sysrq = 0
    #core文件名中添加pid作为扩展名
    kernel.core_uses_pid = 1 # 开启SYN洪水保护
    net.ipv4.tcp_syncookies = 1
    #修改消息队列长度
    kernel.msgmnb = 65536
    kernel.msgmax = 65536
    #设置最大内存共享段大小bytes
    kernel.shmmax = 68719476736
    kernel.shmall = 4294967296
    #timewait的数量,默认180000
    net.ipv4.tcp_max_tw_buckets = 6000
    net.ipv4.tcp_sack = 1
    net.ipv4.tcp_window_scaling = 1
    net.ipv4.tcp_rmem = 4096 87380 4194304
    net.ipv4.tcp_wmem = 4096 16384 4194304
    net.core.wmem_default = 8388608
    net.core.rmem_default = 8388608
    net.core.rmem_max = 16777216
    net.core.wmem_max = 16777216
    #每个网络接口接收数据包的速率比内核处理这些包的速率快时,允许送到队列的数据包的最大数目
    net.core.netdev_max_backlog = 262144
    #限制仅仅是为了防止简单的DoS ***
    net.ipv4.tcp_max_orphans = 3276800
    #未收到客户端确认信息的连接请求的最大值
    net.ipv4.tcp_max_syn_backlog = 262144
    net.ipv4.tcp_timestamps = 0
    #内核放弃建立连接之前发送SYNACK 包的数量
    net.ipv4.tcp_synack_retries = 1
    #内核放弃建立连接之前发送SYN 包的数量
    net.ipv4.tcp_syn_retries = 1
    #启用timewait 快速回收
    net.ipv4.tcp_tw_recycle = 1

  • 相关阅读:
    nginx 域名跳转一例~~~(rewrite、proxy)
    军哥 LNMP 常见问题
    Zabbix安装
    PHP远程连接mysql
    Zend Studio 下载
    军哥LNMP优化
    网络流量监控分析工具 Ntopng 安装
    Linux VPS禁止某个IP访问
    DDoS deflate
    MySQL数据库的优化
  • 原文地址:https://www.cnblogs.com/gaoyuechen/p/16565475.html
Copyright © 2020-2023  润新知