开启IPV6:
sed -i "s/net.ipv6.conf.all.disable_ipv6 = 1/net.ipv6.conf.all.disable_ipv6 = 0/g" /etc/sysctl.conf
sed -i "s/net.ipv6.conf.default.disable_ipv6 = 1/net.ipv6.conf.default.disable_ipv6 = 0/g" /etc/sysctl.conf
sysctl -p
配置IPV6 IP：
root@cn-sh-fx-bcache-03:~ # cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The bond0 network interface
auto bond0
iface bond0 inet static
slaves eth0 eth1
bond-mode 4
bond-miimon 100
bond-lacp-rate 1
bond-xmit-hash-policy 2
address (v4 IP)
netmask (v4 掩码)
gateway (v4 网关)
iface bond0 inet6 static
address (v6地址)
netmask （v6掩码）
up route -A inet6 add default gw (v6网关_ dev bond0
查看v6的路由
ip -6 route show
测试：
ping6 IPV6