1. 为什么学习 Python
Python 语言简单易懂,上手容易,随着 AI 风潮,越来越火。
2. 解释型和编译型语言的区别
编译型语言:把做好的源程序全部编译成二进制的可运行程序。然后,可直接运行这个程序。如:C,C++
解释型语言:把做好的源程序翻译一句,然后执行一句,直至结束!如:Python,
(Java 有些特殊,java程序也需要编译,但是没有直接编译称为机器语言,而是编译称为字节码,然后用解释方式执行字节码。)
3. 简述下 Python 中的字符串、列表、元组和字典
字符串(str):字符串是用引号括起来的任意文本,是编程语言中最常用的数据类型。
列表(list):列表是有序的集合,可以向其中添加或删除元素。
元组(tuple):元组也是有序集合,但是是无法修改的。即元组是不可变的。
字典(dict):字典是无序的集合,是由 key-value 组成的。
集合(set):是一组 key 的集合,每个元素都是唯一,不重复且无序的。
4. 简述上述数据类型的常用方法
字符串
-
切片
mystr='luobodazahui'mystr[1:3]
output
'uo'
-
format
mystr2 = "welcome to luobodazahui, dear {name}" mystr2.format(name="baby")
output
'welcome to luobodazahui, dear baby'
-
join
可以用来连接字符串,将字符串、元组、列表中的元素以指定的字符(分隔符)连接生成一个新的字符串。
mylist = ['luo', 'bo', 'da', 'za', 'hui'] mystr3 = '-'.join(mylist) print(mystr3)
outout
'luo-bo-da-za-hui'
-
replace
String.replace(old,new,count) 将字符串中的 old 字符替换为 New 字符,count 为替换的个数
mystr4 = 'luobodazahui-haha' print(mystr4.replace('haha', 'good'))
output
luobodazahui-good
-
split
切割字符串,得到一个列表。
mystr5 = 'luobo,dazahui good' # 以空格分割 print(mystr5.split()) # 以h分割 print(mystr5.split('h')) # 以逗号分割 print(mystr5.split(','))
output
['luobo,dazahui', 'good'] ['luobo,daza', 'ui good'] ['luobo', 'dazahui good']
列表
-
切片
同字符串
-
append 和 extend
向列表中国添加元素
mylist1 = [1, 2] mylist2 = [3, 4] mylist3 = [1, 2] mylist1.append(mylist2) print(mylist1) mylist3.extend(mylist2) print(mylist3)
outout
[1, 2, [3, 4]] [1, 2, 3, 4]
-
删除元素
del:根据下标进行删除
pop:删除最后一个元素
remove:根据元素的值进行删除
mylist4 = ['a', 'b', 'c', 'd'] del mylist4[0] print(mylist4) mylist4.pop() print(mylist4) mylist4.remove('c') print(mylist4)
output
['b', 'c', 'd'] ['b', 'c'] ['b']
-
元素排序
sort:是将list按特定顺序重新排列,默认为由小到大,参数 reverse=True 可改为倒序,由大到小。
reverse:是将list逆置。
mylist5 = [1, 5, 2, 3, 4] mylist5.sort() print(mylist5) mylist5.reverse() print(mylist5)
output
[1, 2, 3, 4, 5] [5, 4, 3, 2, 1]
字典
-
清空字典
dict.clear()
dict1 = {'key1':1, 'key2':2} dict1.clear() print(dict1)
output
{}
-
指定删除
使用 pop 方法来指定删除字典中的某一项
dict1 = {'key1':1, 'key2':2} d1 = dict1.pop('key1') print(d1) print(dict1)
output
1 {'key2': 2}
-
遍历字典
dict2 = {'key1':1, 'key2':2} mykey = [key for key in dict2] print(mykey) myvalue = [value for value in dict2.values()] print(myvalue) key_value = [(k, v) for k, v in dict2.items() ] print(key_value)
output
['key1', 'key2'] [1, 2] [('key1', 1), ('key2', 2)]
-
fromkeys
用于创建一个新字典,以序列中元素做字典的键,value 为字典所有键对应的初始值
keys = ['zhangfei', 'guanyu', 'liubei', 'zhaoyun'] dict.fromkeys(keys, 0)
output
{'zhangfei': 0, 'guanyu': 0, 'liubei': 0, 'zhaoyun': 0}
5. 简述 Python 中的字符串编码
计算机在最初的设计中,采用了8个比特(bit)作为一个字节(byte)的方式。一个字节能表示的最大的整数就是255(二进制11111111=十进制255),如果要表示更大的整数,就必须用更多的字节。
最早,计算机只有 ASCII 编码,即只包含大小写英文字母、数字和一些符号,这些对于其他语言,如中文,日文显然是不够用的。后来又发明了Unicode,Unicode把所有语言都统一到一套编码里,这样就不会再有乱码问题了。当需要保存到硬盘或者需要传输的时候,就转换为UTF-8编码。UTF-8 是隶属于 Unicode 的可变长的编码方式。
在 Python 中,以 Unicode 方式编码的字符串,可以使用 encode() 方法来编码成指定的 bytes,也可以通过 decode() 方法来把 bytes 编码成字符串。
encode
"中文".encode('utf-8')
output
b'xe4xb8xadxe6x96x87'
decode
b'xe4xb8xadxe6x96x87'.decode('utf-8')
output
'中文'
6. 一行代码实现数值交换
a = 1
b = 2
a, b = b, a
print(a, b)
output
2 1
7. is和==的区别
先来看个例子
c = d = [1,2]
e = [1,2]
print(c is d)
print(c == d)
print(c is e)
print(c == e)
output
True
True
False
True
== 是比较操作符,只是判断对象的值(value)是否一致,而 is 则判断的是对象之间的身份(内存地址)是否一致。对象的身份,可以通过 id() 方法来查看。
id(c)
id(d)
id(e)
output
188748080
188748080
388558288
可以看出,只有 id 一致时,is 比较才会返回 True,而当 value 一致时,== 比较就会返回 True
8. Python 函数中的参数类型
位置参数,默认参数,可变参数,关键字参数
9. *arg和**kwarg作用
允许我们在调用函数的时候传入多个实参
def test(*arg, **kwarg):
if arg:
print("arg:", arg)
if kwarg:
print("kearg:", kwarg)
test('ni', 'hao', key='world')
output
arg: ('ni', 'hao')
kearg: {'key': 'world'}
可以看出:
*arg会把位置参数转化为tuple
**kwarg会把关键字参数转化为dict
10. 一行代码实现1-100之和
sum(range(1, 101))
11. 获取当前时间
import time
import datetime
print(datetime.datetime.now())
print(time.strftime('%Y-%m-%d %H:%M:%S'))
output
12019-06-07 18:12:11.1653302
2019-06-07 18:12:11
12. PEP8 规范
简单列举10条:
- 尽量以免单独使用小写字母'l',大写字母'O',以及大写字母'I'等容易混淆的字母。
- 函数命名使用全部小写的方式,可以使用下划线。
- 常量命名使用全部大写的方式,可以使用下划线。
- 使用 has 或 is 前缀命名布尔元素,如: is_connect = True; has_member = False
- 不要在行尾加分号, 也不要用分号将两条命令放在同一行。
- 不要使用反斜杠连接行。
- 顶级定义之间空2行, 方法定义之间空1行,顶级定义之间空两行。
- 如果一个类不继承自其它类, 就显式的从 object 继承。
- 内部使用的类、方法或变量前,需加前缀'_'表明此为内部使用的。
- 要用断言来实现静态类型检测。
13. Python 的深浅拷贝
浅拷贝
import copy
list1 = [1, 2, 3, [1, 2]]
list2 = copy.copy(list1)
list2.append('a')
list2[3].append('a')
print(list1)
print(list2)
output
[1, 2, 3, [1, 2, 'a']]
[1, 2, 3, [1, 2, 'a'], 'a']
能够看出,浅拷贝只成功”独立“拷贝了列表的外层,而列表的内层列表,还是共享的
深拷贝
import copy
list1 = [1, 2, 3, [1, 2]]
list3 = copy.deepcopy(list1)
list3.append('a')
list3[3].append('a')
print(list1)
print(list3)
output
[1, 2, 3, [1, 2]]
[1, 2, 3, [1, 2, 'a'], 'a']
深拷贝使得两个列表完全独立开来,每一个列表的操作,都不会影响到另一个。
14. 查看下面代码的输出
def num():
return [lambda x:i*x for i in range(4)]
print([m(1) for m in num()])
output
[3, 3, 3, 3]
通过运行结果,可以看出 i 的取值为3,很神奇
15. 可变类型与不可变类型
可变数据类型:list、dict、set
不可变数据类型:int/float、str、tuple
16. 打印九九乘法表
for i in range(1, 10):
for j in range(1, i+1):
print("%s*%s=%s " %(i, j, i*j), end="")
print()
output
1*1=1
2*1=2 2*2=4
3*1=3 3*2=6 3*3=9
4*1=4 4*2=8 4*3=12 4*4=16
5*1=5 5*2=10 5*3=15 5*4=20 5*5=25
6*1=6 6*2=12 6*3=18 6*4=24 6*5=30 6*6=36
7*1=7 7*2=14 7*3=21 7*4=28 7*5=35 7*6=42 7*7=49
8*1=8 8*2=16 8*3=24 8*4=32 8*5=40 8*6=48 8*7=56 8*8=64
9*1=9 9*2=18 9*3=27 9*4=36 9*5=45 9*6=54 9*7=63 9*8=72 9*9=81
print 函数,默认是会换行的,其有一个默认参数 end,如果像例子中,我们把 end 参数显示的置为"",那么 print 函数执行完后,就不会换行了,这样就达到了九九乘法表的效果了。
17. filter、map、reduce 的作用
filter 函数用于过滤序列,它接收一个函数和一个序列,把函数作用在序列的每个元素上,然后根据返回值是True还是False决定保留还是丢弃该元素。
mylist = [1, 2, 3, 4, 5, 6, 7, 8, 9]
list(filter(lambda x: x%2 == 1, mylist))
output
[1, 3, 5, 7, 9]
保留奇数列表
map 函数传入一个函数和一个序列,并把函数作用到序列的每个元素上,返回一个可迭代对象
mylist = [1, 2, 3, 4, 5, 6, 7, 8, 9]
list(map(lambda x: x*2, mylist))
output
[2, 4, 6, 8, 10, 12, 14, 16, 18]
reduce 函数用于递归计算,同样需要传入一个函数和一个序列,并把函数和序列元素的计算结果与下一个元素进行计算。
from functools import reduce
reduce(lambda x, y: x+y, range(101))
output
15050
可以看出,上面的三个函数与匿名函数相结合使用,可以写出强大简洁的代码。
18. re 的 match 和 search 区别
match()函数只检测要匹配的字符是不是在 string 的开始位置匹配,search()会扫描整个 string 查找匹配
19. 面向对象中new__ 和__init 区别
new是在实例创建之前被调用的,因为它的任务就是创建实例然后返回该实例对象,是个静态方法。
init是当实例对象创建完成后被调用的,然后设置对象属性的一些初始值,通常用在初始化一个类实例的时候。是一个实例方法。
1、new至少要有一个参数 cls,代表当前类,此参数在实例化时由 Python 解释器自动识别。
2、new__必须要有返回值,返回实例化出来的实例,这点在自己实现*new*时要特别注意,可以 return 父类(通过 super(当前类名, cls))*new*出来的实例,或者直接是 object 的__new出来的实例。
3、init__有一个参数 self,就是这个*new*返回的实例,*init*在*new*的基础上可以完成一些其它初始化的动作,__init不需要返回值。
4、如果new__创建的是当前类的实例,会自动调用*init*函数,通过 return 语句里面调用的*new*函数的第一个参数是 cls 来保证是当前类实例,如果是其他类的类名,;那么实际创建返回的就是其他类的实例,其实就不会调用当前类的*init*函数,也不会调用其他类的__init函数。
20. 三元运算规则
a, b = 1, 2
# 若果 a>b 成立 就输出 a-b 否则 a+b
h = a-b if a>b else a+b
output
13
21. 生成随机数
print(random.random())
print(random.randint(1, 100))
print(random.uniform(1,5))
output
10.03765019937131564
218
31.8458555362279228
22. zip 函数用法
zip() 函数将可迭代的对象作为参数,将对象中对应的元素打包成一个个元组,然后返回由这些元组组成的列表
list1 = ['zhangfei', 'guanyu', 'liubei', 'zhaoyun']
list2 = [0, 3, 2, 4]
list(zip(list1, list2))
output
[('zhangfei', 0), ('guanyu', 3), ('liubei', 2), ('zhaoyun', 4)]
23. range 和 xrange 的区别
range([start,] stop[, step]),根据 start 与 stop 指定的范围以及 step 设定的步长,生成一个序列。
而 xrange 生成一个生成器,可以很大的节约内存。
24. with 方法打开文件的作用
开文件在进行读写的时候可能会出现一些异常状况,如果按照常规的 f.open 写法,我们需要 try,except,finally,做异常判断,并且文件最终不管遇到什么情况,都要执行 finally f.close() 关闭文件,with 方法帮我们实现了 finally 中 f.close。
25. 什么是正则的贪婪匹配
Python 中默认是贪婪匹配模式。
贪婪模式:正则表达式一般趋向于最大长度匹配。
非贪婪模式:在整个表达式匹配成功的前提下,尽可能少的匹配。
26. 为什么不建议函数的默认参数传入可变对象
例如:
def test(L=[]):
L.append('test')
print(L)
output
test() # ['test']
test() # ['test', 'test']
默认参数是一个列表,是可变对象[],Python 在函数定义的时候,默认参数 L 的值就被计算出来了,是[],每次调用函数,如果 L 的值变了,那么下次调用时,默认参数的值就已经不再是[]了。
27. 字符串转列表
mystr = '1,2,3'
mystr.split(',')
output
['1', '2', '3']
28. 字符串转整数
mylist = ['1', '2', '3']list(map(lambda x: int(x), mylist))
output
[1, 2, 3]
29. 删除列表中的重复值
mylist = [1, 2, 3, 4, 5, 5]
list(set(mylist))
30. 字符串单词统计
from collections import Counter
mystr = 'sdfsfsfsdfsd,were,hrhrgege.sdfwe!sfsdfs'
Counter(mystr)
output
Counter({'s': 9,
'd': 5,
'f': 7,
',': 2,
'w': 2,
'e': 5,
'r': 3,
'h': 2,
'g': 2,
'.': 1,
'!': 1})
31. 列表推导,求奇偶数
[x for x in range(10) if x%2 == 1]
output
[1, 3, 5, 7, 9]
32. 一行代码展开列表
list1 = [[1,2],[3,4],[5,6]]
[j for i in list1 for j in i]
output
[1, 2, 3, 4, 5, 6]
33. 实现二分法查找函数
二分查找算法也称折半查找,基本思想就是折半,对比大小后再折半查找,必须是有序序列才可以使用二分查找。
递归算法
def binary_search(data, item):
# 递归
n = len(data)
if n > 0:
mid = n // 2
if data[mid] == item:
return True
elif data[mid] > item:
return binary_search(data[:mid], item)
else:
return binary_search(data[mid+1:], item)
return False
list1 = [1,4,5,66,78,99,100,101,233,250,444,890]
binary_search(list1, 999)
非递归算法
def binary_search(data, item):
# 非递归
n = len(data)
first = 0
last = n - 1
while first <= last:
mid = (first + last)//2
if data[mid] == item:
return True
elif data[mid] > item:
last = mid - 1
else:
first = mid + 1
return False
list1 = [1,4,5,66,78,99,100,101,233,250,444,890]
binary_search(list1, 99)
34. 字典和 json 转换
字典转 json
import json
dict1 = {'zhangfei':1, "liubei":2, "guanyu": 4, "zhaoyun":3}
myjson = json.dumps(dict1)
myjson
output
'{"zhangfei": 1, "liubei": 2, "guanyu": 4, "zhaoyun": 3}'
json 转字典
mydict = json.loads(myjson)
mydict
output
{'zhangfei': 1, 'liubei': 2, 'guanyu': 4, 'zhaoyun': 3}
35. 列表推导式、字典推导式和生成器
import random
td_list=[i for i in range(10)]
print("列表推导式", td_list, type(td_list))
ge_list = (i for i in range(10))
print("生成器", ge_list)
dic = {k:random.randint(4, 9)for k in ["a", "b", "c", "d"]}
print("字典推导式",dic,type(dic))
output
列表推导式 [0, 1, 2, 3, 4, 5, 6, 7, 8, 9] <class 'list'>
生成器 <generator object <genexpr> at 0x0139F070>
字典推导式 {'a': 6, 'b': 5, 'c': 8, 'd': 9} <class 'dict'>
36. 简述 read、readline、readlines 的区别
read 读取整个文件
readline 读取下一行,使用生成器方法
readlines 读取整个文件到一个迭代器以供我们遍历
37. 打乱一个列表
list2 = [1, 2, 3, 4, 5, 6]
random.shuffle(list2)
print(list2)
output
[4, 6, 5, 1, 2, 3]
38. 反转字符串
str1 = 'luobodazahui'
str1[::-1]
output
'iuhazadoboul'
39. 单下划线和双下划线的作用
__foo__
:一种约定,Python 内部的名字,用来区别其他用户自定义的命名,以防冲突,就是例如init__()和*del*()及__call()这些特殊方法。
_foo
:一种约定,用来指定变量私有。不能用 from module import * 导入,其他方面和公有变量一样访问。
__foo
:这个有真正的意义:解析器用classname__foo 来代替这个名字,以区别和其他类相同的命名,它无法直接像公有成员一样随便访问,通过对象名.类名__xxx 这样的方式可以访问。
40. 新式类和旧式类
a. 在 python 里凡是继承了 object 的类,都是新式类
b. Python3 里只有新式类
c. Python2 里面继承 object 的是新式类,没有写父类的是经典类
d. 经典类目前在 Python 里基本没有应用
41. Python 面向对象中的继承有什么特点
a. 同时支持单继承与多继承,当只有一个父类时为单继承,当存在多个父类时为多继承。
b. 子类会继承父类所有的属性和方法,子类也可以覆盖父类同名的变量和方法。
c. 在继承中基类的构造(__init__()
)方法不会被自动调用,它需要在其派生类的构造中专门调用。
d. 在调用基类的方法时,需要加上基类的类名前缀,且需要带上 self 参数变量。区别于在类中调用普通函数时并不需要带上 self 参数。
42. super 函数的作用
super() 函数是用于调用父类(超类)的一个方法。
class A():
def funcA(self):
print("this is func A")
class B(A):
def funcA_in_B(self):
super(B, self).funcA()
def funcC(self):
print("this is func C")
ins = B()
ins.funcA_in_B()
ins.funcC()
output
this is func A
this is func C
43. 类中的各种函数
主要分为实例方法、类方法和静态方法
实例方法:
定义:第一个参数必须是实例对象,该参数名一般约定为“self”,通过它来传递实例的属性和方法(也可以传类的属性和方法);
调用:只能由实例对象调用。
类方法:
定义:使用装饰器@classmethod。第一个参数必须是当前类对象,该参数名一般约定为“cls”,通过它来传递类的属性和方法(不能传实例的属性和方法);
调用:实例对象和类对象都可以调用。
静态方法:
定义:使用装饰器@staticmethod。参数随意,没有“self”和“cls”参数,但是方法体中不能使用类或实例的任何属性和方法;
调用:实例对象和类对象都可以调用。
静态方法是类中的函数,不需要实例。静态方法主要是用来存放逻辑性的代码,主要是一些逻辑属于类,但是和类本身没有交互。即在静态方法中,不会涉及到类中的方法和属性的操作。可以理解为将静态方法存在此类的名称空间中。
类方法是将类本身作为对象进行操作的方法。他和静态方法的区别在于:不管这个方式是从实例调用还是从类调用,它都用第一个参数把类传递过来。
44. 如何判断是函数还是方法
与类和实例无绑定关系的 function 都属于函数(function)
与类和实例有绑定关系的 function 都属于方法(method)
普通函数:
def func1():
passprint(func1)
output
<function func1 at 0x01379348>
类中的函数:
class People(object):
def func2(self):
pass
@staticmethod
def func3():
pass
@classmethod
def func4(cls):
pass
people = People()
print(people.func2)
print(people.func3)
print(people.func4)
output
<bound method People.func2 of <__main__.People object at 0x013B8C90>>
<function People.func3 at 0x01379390>
<bound method People.func4 of <class '__main__.People'>>
45. isinstance 的作用以及与 type()的区别
isinstance() 函数来判断一个对象是否是一个已知的类型,类似 type()。
区别:
type() 不会认为子类是一种父类类型,不考虑继承关系。
isinstance() 会认为子类是一种父类类型,考虑继承关系。
class A(object):
pass
class B(A):
pass
a = A()
b = B()
print(isinstance(a, A))
print(isinstance(b, A))
print(type(a) == A)
print(type(b) == A)
output
True
True
True
False
46. 单例模式与工厂模式
单例模式:主要目的是确保某一个类只有一个实例存在。
工厂模式:包涵一个超类,这个超类提供一个抽象化的接口来创建一个特定类型的对象,而不是决定哪个对象可以被创建。
47. 查看目录下的所有文件
import os
print(os.listdir('.'))
48. 计算1到5组成的互不重复的三位数
# 1到5组成的互不重复的三位数
k = 0
for i in range(1, 6):
for j in range(1, 6):
for z in range(1, 6):
if (i != j) and (i != z) and (j != z):
k += 1
if k%6:
print("%s%s%s" %(i, j, z), end="|")
else:
print("%s%s%s" %(i, j, z))
output
123|124|125|132|134|135
142|143|145|152|153|154
213|214|215|231|234|235
241|243|245|251|253|254
312|314|315|321|324|325
341|342|345|351|352|354
412|413|415|421|423|425
431|432|435|451|452|453
512|513|514|521|523|524
531|532|534|541|542|543
49. 去除字符串首尾空格
str1 = " hello nihao "
str1.strip()
output
'hello nihao'
50. 去除字符串中间的空格
str2 = "hello you are good"
print(str2.replace(" ", ""))
"".join(str2.split(" "))
output
helloyouaregood
'helloyouaregood'