zabbix Simple-check

说明

Simple check一般用于被监控的对象上无法安装客户端的情况，通过检测网络通讯状态及端口状态来监控对象的存活情况。

icmpping[<target>,<packets>,<interval>,<size>,<timeout>]	Checks if server is accessible by ICMP ping. 0 - ICMP ping fails. 1 - ICMP ping successful. One of zabbix_server processes performs ICMP pings once per PingerFrequency seconds. 使用PING命令检测通讯状态，返回0表示不通，返回1表示通过
icmppingloss[<target>,<packets>,<interval>,<size>,<timeout>]	Returns percentage of lost ICMP ping packets. 返回丢失包占的比例
icmppingsec[<target>,<packets>,<interval>,<size>,<timeout>,<mode>]	Returns ICMP ping response time in seconds. Example: 0.02 返回PING影响时间
net.tcp.service.perf[service,<ip>,<port>]	Check performance of service. 0 - service is down, sec - number of seconds spent on connection to the service. If <ip> is missing, IP or DNS name is taken from host definition. If <port> is missing, default service port is used. 检查服务性能
net.tcp.service[service,<ip>,<port>]	Check if service is available. 0 - service is down, 1 - service is running. If <ip> is missing, IP or DNS name is taken from host definition. If <port> is missing, default service port is used. 检查服务是否运行

1、icmpping[<target>,<packets>,<interval>,<size>,<timeout>]　　

添加示例：　　icmpping[192.168.1.1,4,1000,32,10000]　　　　

对应项解析：　目标ip,包个数，相邻包时间间隔，每个包大小（bytes）,超时时间（时间默认都是ms）

2、icmppingsec[<target>,<packets>,<interval>,<size>,<timeout>,<mode>]

添加示例：icmppingsec[<1.1.1.1,4,100,32,10000,avg]

对应项解析：　目标ip,包个数，相邻包时间间隔，每个包大小（bytes）,超时时间（时间默认都是ms)，模式分为max/min/avg 三种模式

3、net.tcp.service[service,<ip>,<port>]

添加示例：net.tcp.service[http,1.1.1.1,80]

对应项解析：服务，ip，端口

可以单独创建一个simple check 的模板，供所有的不能装agent 的主机使用。