• centos编译 Compiling FFmpeg on CentOS RHEL Fedora


    This guide is based on a minimal installation of the latest CentOS release, and will provide a local, non-system installation of FFmpeg with support for several external encoding libraries. These instructions should also work for recent Red Hat Enterprise Linux (RHEL) and Fedora. This is a non-invasive guide and undoing all steps is simple and is shown at the end of this page.


    Get the Dependencies

    These are required compiling, but you can remove them when you are done if you prefer (except make; it should be installed by default and many things depend on it).

    # yum install autoconf automake cmake freetype-devel gcc gcc-c++ git libtool make mercurial nasm pkgconfig zlib-devel bzip2 
    In your home directory make a new directory to put all of the source code into:
    mkdir ~/ffmpeg_sources 

    Compilation & Installation

    Note: If you do not require certain encoders you may skip the relevant section and then remove the appropriate ./configure option in FFmpeg. For example, if libvorbis is not needed, then skip that section and then remove --enable-libvorbis from the Install FFmpeg section.

    Yasm

    Yasm is an assembler used by x264 and FFmpeg.

    cd ~/ffmpeg_sources git clone --depth 1 git://github.com/yasm/yasm.git cd yasm autoreconf -fiv ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" make && make install make distclean 

    libx264

    H.264 video encoder. See the H.264 Encoding Guide for more information and usage examples.

    Requires ffmpeg to be configured with --enable-gpl --enable-libx264.

    cd ~/ffmpeg_sources git clone --depth 1 git://git.videolan.org/x264 cd x264 
    PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig"./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --enable-static
    make && make install make distclean

    libx265

    H.265/HEVC video encoder. See the H.265 Encoding Guide for more information and usage examples.

    Requires ffmpeg to be configured with --enable-gpl --enable-libx265.

    cd ~/ffmpeg_sources hg clone https://bitbucket.org/multicoreware/x265 cd ~/ffmpeg_sources/x265/build/linux cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$HOME/ffmpeg_build" -DENABLE_SHARED:bool=off ../../source make make install 

    libfdk_aac

    AAC audio encoder.

    Requires ffmpeg to be configured with --enable-libfdk-aac (and --enable-nonfree if you also included --enable-gpl).

    cd ~/ffmpeg_sources git clone --depth 1 git://git.code.sf.net/p/opencore-amr/fdk-aac cd fdk-aac autoreconf -fiv ./configure --prefix="$HOME/ffmpeg_build" --disable-shared make && make install && make distclean 

    libmp3lame

    MP3 audio encoder.

    Requires ffmpeg to be configured with --enable-libmp3lame.

    cd ~/ffmpeg_sources curl -L -O http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz tar xzvf lame-3.99.5.tar.gz cd lame-3.99.5 ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --disable-shared --enable-nasm make make install make distclean 

    libopus

    Opus audio decoder and encoder.

    Requires ffmpeg to be configured with --enable-libopus.

    cd ~/ffmpeg_sources git clone git://git.opus-codec.org/opus.git cd opus autoreconf -fiv ./configure --prefix="$HOME/ffmpeg_build" --disable-shared make make install make distclean 

    libogg

    Ogg bitstream library. Required by libtheora and libvorbis.

    cd ~/ffmpeg_sources curl -O http://downloads.xiph.org/releases/ogg/libogg-1.3.2.tar.gz tar xzvf libogg-1.3.2.tar.gz cd libogg-1.3.2 ./configure --prefix="$HOME/ffmpeg_build" --disable-shared make make install make distclean 

    libvorbis

    Vorbis audio encoder. Requires libogg.

    Requires ffmpeg to be configured with --enable-libvorbis.

    cd ~/ffmpeg_sources curl -O http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.4.tar.gz tar xzvf libvorbis-1.3.4.tar.gz cd libvorbis-1.3.4 LDFLAGS="-L$HOME/ffmeg_build/lib" CPPFLAGS="-I$HOME/ffmpeg_build/include" ./configure --prefix="$HOME/ffmpeg_build" --with-ogg="$HOME/ffmpeg_build" --disable-shared make make install make distclean 

    libvpx

    VP8/VP9 video encoder.

    Requires ffmpeg to be configured with --enable-libvpx.


    地址要改为https://github.com/webmproject/libvpx/   git clone https://github.com/webmproject/libvpx


    cd ~/ffmpeg_sources git clone --depth 1 https://chromium.googlesource.com/webm/libvpx.git cd libvpx ./configure --prefix="$HOME/ffmpeg_build" --disable-examples make make install make clean 

    FFmpeg

    cd ~/ffmpeg_sources git clone --depth 1 git://source.ffmpeg.org/ffmpeg cd ffmpeg PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" ./configure --prefix="$HOME/ffmpeg_build" --extra-cflags="-I$HOME/ffmpeg_build/include" --extra-ldflags="-L$HOME/ffmpeg_build/lib" --bindir="$HOME/bin" --pkg-config-flags="--static" --enable-gpl --enable-nonfree --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 make && make install && make distclean hash -r 

    Compilation is now complete and ffmpeg (also ffprobeffserverlame, and x264) should now be ready to use. The rest of this guide shows how to update or remove FFmpeg.


    编译完成后,会:


    Tip: Keep the ffmpeg_sources directory and all contents if you intend to update as shown below. Otherwise you can delete this directory.


    Updating

    Development of FFmpeg is active and an occasional update can give you new features and bug fixes. First, remove the old files and then update the dependencies:

    rm -rf ~/ffmpeg_build ~/bin/{ffmpeg,ffprobe,ffserver,lame,vsyasm,x264,x265,yasm,ytasm} # yum install autoconf automake cmake gcc gcc-c++ git libtool make mercurial nasm pkgconfig zlib-devel 

    Update Yasm

    cd ~/ffmpeg_sources/yasm make distclean git pull 

    Then run ./configuremake, and make install as shown in the Install yasm section.

    Update x264

    cd ~/ffmpeg_sources/x264 make distclean git pull 

    Then run ./configuremake, and make install as shown in the Install x264 section.

    Update x265

    cd ~/ffmpeg_sources/x265 rm -rf ~/ffmpeg_sources/x265/build/linux/* hg update cd ~/ffmpeg_sources/x265/build/linux 

    Then run cmakemake, and make install as shown in the Install x265 section.

    Update libfdk_aac

    cd ~/ffmpeg_sources/fdk_aac make distclean git pull 

    Then run ./configuremake, and make install as shown in the Install libfdk_aac section.

    Update libvpx

    cd ~/ffmpeg_sources/libvpx make clean git pull 

    Then run ./configuremake, and make install as shown in the Install libvpx section.

    Update FFmpeg

    cd ~/ffmpeg_sources/ffmpeg make distclean git pull 

    Then run ./configuremake, and make install as shown in the Install FFmpeg section.


    Reverting changes made by this guide

    rm -rf ~/ffmpeg_build ~/ffmpeg_sources ~/bin/{ffmpeg,ffprobe,ffserver,lame,vsyasm,x264,yasm,ytasm} # yum erase autoconf automake cmake gcc gcc-c++ git libtool mercurial nasm pkgconfig zlib-devel hash -r 

    If You Need Help

    Feel free to ask your questions at the #ffmpeg IRC channel or the ​ffmpeg-user mailing list.


    Also See

  • 相关阅读:
    剑指Offers 题目1384:二维数组中的查找
    剪切板获取图片并上传
    VSCode TSlint + Prettier 实现代码的格式化
    Element Table 合并列
    Linux下安装Redis
    transfer 增加拖拽排序组件封装
    在VSCode中使用Git处理文件冲突(pull不能从服务器拉取代码)
    Vue的 transition在v-for的嵌套下怎么用
    Vant的picker组件放在popup中,导致ref获取不到
    小工具
  • 原文地址:https://www.cnblogs.com/elesos/p/6867909.html
Copyright © 2020-2023  润新知