iOS常用第三方库之Masonry

一、前言

　　关于苹果的布局一直是我比较纠结的问题，是写代码来控制布局，还是使用storyboard来控制布局呢？以前我个人开发的时候很少使用代码去写约束，因为太麻烦了。所以最终选择的都是AutoLayout进行布局，然后拖线设置约束。不过好多公司进行iOS开发的时候都会去动态的修改约束，而且有的会使用约束去创建一些动画，所以不太去用storyboard进行开发（还有就是使用storyboard几个人合作的时候比较麻烦）。反倒更多的是写代码开发看起来更加的高效。所以好多开发者都开始去使用Masonry。它是一个封装的第三方类库，作用就是来简化开发者写布局约束。

二、“安装”Masonry

　　因为它是一个第三方的类库，我们可以从这里下载，然后解压将Masonry那个文件夹拖入自己的项目文件夹下即可。

三、开始使用Masonry

　　我们在使用它的时候，最好在AppDelegate.m的

- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions；

方法中去自定义加载自己的控制器。例如我写的时候就是这样：

- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
    self.window = [[UIWindow alloc] initWithFrame:[UIScreen mainScreen].bounds];
    self.window.backgroundColor = [UIColor whiteColor];
    UINavigationController *nav = [[UINavigationController alloc] initWithRootViewController:[[ViewController alloc] init]];
    self.window.rootViewController = nav;
    [self.window makeKeyAndVisible];
    return YES;
}

直接加载的我自己写的ViewController。（建议把系统自带的Main.stoaryboard删除掉，如果运行报错自己修改，问题不大）。

先来一个不用Masonry写的最简单的布局：（目的是在视图中添加一个视图）

- (void)viewDidLoad {
    [super viewDidLoad];
    self.title  = @"Basic View";
    UIView *view1 = [[UIView alloc] init];
    view1.translatesAutoresizingMaskIntoConstraints = NO;
    view1.backgroundColor = [UIColor greenColor];
    [superview addSubview:view1];
    
    UIEdgeInsets padding = UIEdgeInsetsMake(74, 10, 10, 10);
    
    [superview addConstraints:@[
                                
                                //view1 constraints
                                [NSLayoutConstraint constraintWithItem:view1
                                                             attribute:NSLayoutAttributeTop
                                                             relatedBy:NSLayoutRelationEqual
                                                                toItem:superview
                                                             attribute:NSLayoutAttributeTop
                                                            multiplier:1.0
                                                              constant:padding.top],
                                
                                [NSLayoutConstraint constraintWithItem:view1
                                                             attribute:NSLayoutAttributeLeft
                                                             relatedBy:NSLayoutRelationEqual
                                                                toItem:superview
                                                             attribute:NSLayoutAttributeLeft
                                                            multiplier:1.0
                                                              constant:padding.left],
                                
                                [NSLayoutConstraint constraintWithItem:view1
                                                             attribute:NSLayoutAttributeBottom
                                                             relatedBy:NSLayoutRelationEqual
                                                                toItem:superview
                                                             attribute:NSLayoutAttributeBottom
                                                            multiplier:1.0
                                                              constant:-padding.bottom],
                                
                                [NSLayoutConstraint constraintWithItem:view1
                                                             attribute:NSLayoutAttributeRight
                                                             relatedBy:NSLayoutRelationEqual
                                                                toItem:superview
                                                             attribute:NSLayoutAttributeRight
                                                            multiplier:1
                                                              constant:-padding.right],
                                
                                ]];

}

运行效果如下：

这就是我们用系统的NSLayoutConstraint写的一个view，然后将这个view加载到根view中。现在我们用Masonry来实现和上边一样的效果：

第一步、导入类库

#import "Masonry.h"

然后修改代码如下：

- (void)viewDidLoad {
    [super viewDidLoad];
    self.title  = @"Basic View";
    UIView *superview = self.view;
    
    UIView *view1 = [[UIView alloc] init];
    view1.translatesAutoresizingMaskIntoConstraints = NO;
    view1.backgroundColor = [UIColor greenColor];
    [superview addSubview:view1];
    
    UIEdgeInsets padding = UIEdgeInsetsMake(74, 10, 10, 10);
    [view1 mas_makeConstraints:^(MASConstraintMaker *make) {
        make.top.equalTo(superview.mas_top).offset(padding.top);
        make.left.equalTo(superview.mas_left).offset(padding.left);
        make.bottom.equalTo(superview.mas_bottom).offset(-padding.bottom);
        make.right.equalTo(superview.mas_right).offset(-padding.right);
    }];
}

上面的效果和原来用NSLayoutConstraint实现的效果是一样的，所以就不再贴图。

我们可以看到，我们使用的一个mas_makConstrints块来进行约束设置。view1指代的就是要添加约束的view（也可以是button，label等等）。然后make的top，left,bottom,right就相当于view1的上下左右，然后equalTo（）括号内的就是相对的view，然后offset是偏移量。

还可以更简单的实现：

- (void)viewDidLoad {
    [super viewDidLoad];
    self.title  = @"Basic View";
    UIView *superview = self.view;
    
    UIView *view1 = [[UIView alloc] init];
    view1.translatesAutoresizingMaskIntoConstraints = NO;
    view1.backgroundColor = [UIColor greenColor];
    [superview addSubview:view1];
    
    UIEdgeInsets padding = UIEdgeInsetsMake(74, 10, 10, 10);
    [view1 mas_makeConstraints:^(MASConstraintMaker *make) {
        make.edges.equalTo(superview).with.insets(padding);
    }];
//    [view1 mas_makeConstraints:^(MASConstraintMaker *make) {
//        make.top.equalTo(superview.mas_top).offset(padding.top);
//        make.left.equalTo(superview.mas_left).offset(padding.left);
//        make.bottom.equalTo(superview.mas_bottom).offset(-padding.bottom);
//        make.right.equalTo(superview.mas_right).offset(-padding.right);
//    }];
}

以上的三种方式都是实现上边图种的效果。

MASViewAttribute	NSLayoutAttribute
view.mas_left	NSLayoutAttributeLeft
view.mas_right	NSLayoutAttributeRight
view.mas_top	NSLayoutAttributeTop
view.mas_bottom	NSLayoutAttributeBottom
view.mas_leading	NSLayoutAttributeLeading
view.mas_trailing	NSLayoutAttributeTrailing
view.mas_width	NSLayoutAttributeWidth
view.mas_height	NSLayoutAttributeHeight
view.mas_centerX	NSLayoutAttributeCenterX
view.mas_centerY	NSLayoutAttributeCenterY
view.mas_baseline	NSLayoutAttributeBaseline

以上的属性对应相应的NSLayoutAttribute。

下面就来看它的使用吧。（先上效果图，然后再上代码）

使用一、简单的三个视图的布局

这个时我直接自定义了一个ZGBasicView视图，然后添加到了ViewController中。

关键代码如下：

//
//  ZGBasicView.m
//  MasonryDemo
//
//  Created by zhanggui on 15/10/26.
//  Copyright © 2015年 zhanggui. All rights reserved.
//

#import "ZGBasicView.h"
#import "View+MASShorthandAdditions.h"
@implementation ZGBasicView

/*
// Only override drawRect: if you perform custom drawing.
// An empty implementation adversely affects performance during animation.
- (void)drawRect:(CGRect)rect {
    // Drawing code
}
*/
- (id)init {
    self = [super init];
    if (!self) {
        return nil;
    }
//        self.translatesAutoresizingMaskIntoConstraints = YES;
        //红色视图
        UIView *redView = [UIView new];
        redView.backgroundColor = [UIColor redColor];
        redView.layer.borderColor = [UIColor blackColor].CGColor;
        redView.layer.borderWidth = 2;
        [self addSubview:redView];
        //绿色视图
        UIView *greenView = [[UIView alloc] init];
        greenView.backgroundColor = [UIColor greenColor];
        greenView.layer.borderColor = [UIColor blackColor].CGColor;
        greenView.layer.borderWidth = 2;
        [self addSubview:greenView];
     
        //蓝色视图
        UIView *blueView = [[UIView alloc] init];
        blueView.backgroundColor = [UIColor blueColor];
        blueView.layer.borderWidth = 2;
        blueView.layer.borderColor = [UIColor blackColor].CGColor;
        
        [self addSubview:blueView];
        
        
        int padding = 10;
        UIView *superview = self;
      
        
        //with is semantic and option
        [redView mas_makeConstraints:^(MASConstraintMaker *make) {
            make.top.equalTo(superview.mas_top).offset(padding); //with with
            make.left.equalTo(greenView.mas_right).offset(padding); //without with
            make.bottom.equalTo(blueView.mas_top).offset(-padding);
            make.right.equalTo(superview.mas_right).offset(-padding);
            make.width.equalTo(greenView.mas_width);
            
            make.height.equalTo(@[greenView, blueView]); //can pass array of views
        }];
        [greenView mas_makeConstraints:^(MASConstraintMaker *make) {
            make.top.equalTo(superview.mas_top).offset(padding);
            make.left.equalTo(superview.mas_left).offset(padding);
            make.bottom.equalTo(blueView.mas_top).offset(-padding);
            make.right.equalTo(redView.mas_left).offset(-padding);
            make.width.equalTo(redView.mas_width);
            
            make.height.equalTo(redView.mas_height);
//            make.height.equalTo(blueView.mas_height);
        }];
        [blueView mas_makeConstraints:^(MASConstraintMaker *make) {
            make.top.equalTo(greenView.mas_bottom).offset(padding);
            make.left.equalTo(superview.mas_left).offset(padding);
            make.bottom.equalTo(superview.mas_bottom).offset(-padding);
            make.right.equalTo(superview.mas_right).offset(-padding);
            make.height.equalTo(greenView.mas_height); //can pass array of attributes
        }];
    return self;
}
@end

三个视图之间的关系。

场景二、更新视图

效果图如下：

实现代码如下：（这里也是自定义了一个View,然后将这个view加入到了根视图中）

//
//  UpdateConstraintsView.m
//  MasonryDemo
//
//  Created by zhanggui on 15/10/26.
//  Copyright © 2015年 zhanggui. All rights reserved.
//

#import "UpdateConstraintsView.h"
#import "Masonry.h"

@interface UpdateConstraintsView ()

@property (nonatomic,strong)UIButton *myButton;
@property (nonatomic,assign)CGSize buttonSize;
@end
@implementation UpdateConstraintsView

- (id)init {
    self = [super init];
    if (self) {
        self.myButton = [UIButton buttonWithType:UIButtonTypeSystem];
        [self.myButton setTitle:@"更新约束" forState:UIControlStateNormal];
        self.myButton.layer.borderColor = [UIColor blackColor].CGColor;
        self.myButton.layer.borderWidth = 2;
        [self.myButton addTarget:self action:@selector(changeAction:) forControlEvents:UIControlEventTouchUpInside];
        [self addSubview:self.myButton];
        self.buttonSize = CGSizeMake(100, 100);
    }
    return self;
}
/**
 Returns whether the receiver depends on the constraint-based layout system.
 YES if the view must be in a window using constraint-based layout to function properly, NO otherwise.
 */
+ (BOOL)requiresConstraintBasedLayout {
    return YES;
}
/**
 Updates constraints for the view.
 Custom views that set up constraints themselves should do so by overriding this method. When your custom view notes that a change has been made to the view that invalidates one of its constraints, it should immediately remove that constraint, and then call setNeedsUpdateConstraints to note that constraints need to be updated. Before layout is performed, your implementation of updateConstraints will be invoked, allowing you to verify that all necessary constraints for your content are in place at a time when your custom view’s properties are not changing.
 You must not invalidate any constraints as part of your constraint update phase. You also must not invoke a layout or drawing phase as part of constraint updating.
 Important:Important
 Call [super updateConstraints] as the final step in your implementation.
 苹果推荐在这个方法里面添加或者更新约束
 */
- (void)updateConstraints {
    [self.myButton mas_updateConstraints:^(MASConstraintMaker *make) {
        make.center.equalTo(self);
        make.width.equalTo(@(self.buttonSize.width)).priorityLow();  //设置优先级以及width
        make.height.equalTo(@(self.buttonSize.height)).priorityLow();
        //设置myButton的大小小于等于自身view的大小
        make.width.lessThanOrEqualTo(self);
        make.height.lessThanOrEqualTo(self);
    }];
    [super updateConstraints];
}
- (void)changeAction:(UIButton *)button {
    self.buttonSize = CGSizeMake(self.buttonSize.width*1.2, self.buttonSize.height*1.2);

    //告诉约束他们需要更新
    [self setNeedsUpdateConstraints];
    //update constraints now
    [self updateConstraintsIfNeeded];
    //设置更新大小动画
    [UIView animateWithDuration:0.5 animations:^{
        /**
         Lays out the subviews immediately.
         Use this method to force the layout of subviews before drawing. Using the view that receives the message as the root view, this method lays out the view subtree starting at the root.
         */
        [self layoutIfNeeded];
    }];
}
@end

这里主要使用了mas_updateConstraints：方法

场景三、让约束复原

实现代码如下：

//
//  ReBackConstraintsView.m
//  MasonryDemo
//可以恢复原来的约束
//  Created by zhanggui on 15/10/26.
//  Copyright © 2015年 zhanggui. All rights reserved.
//

#import "ReBackConstraintsView.h"
#import "Masonry.h"
@interface ReBackConstraintsView ()
@property (nonatomic,strong)UIButton *myButton;
@property (nonatomic,assign)BOOL isAtTop;

@end

@implementation ReBackConstraintsView

- (id)init {
    self = [super init];
    if (self) {
        self.myButton = [UIButton buttonWithType:UIButtonTypeSystem];;
        [self.myButton setTitle:@"Move Me!" forState:UIControlStateNormal];
        self.myButton.layer.borderColor = UIColor.greenColor.CGColor;
        self.myButton.layer.borderWidth = 3;
        
        [self.myButton addTarget:self action:@selector(moveAction:) forControlEvents:UIControlEventTouchUpInside];
        [self addSubview:self.myButton];
        
        self.isAtTop = YES;
        

    }
    return self;
}
+ (BOOL)requiresConstraintBasedLayout {
    return YES;
}
- (void)updateConstraints {
    [self.myButton mas_remakeConstraints:^(MASConstraintMaker *make) {
        make.width.equalTo(@(100));
        make.height.equalTo(@(100));
        if (self.isAtTop) {
            make.left.equalTo(self.mas_left).offset(10);
            make.top.equalTo(self.mas_top).offset(10);
        }else {
            make.bottom.equalTo(self.mas_bottom).offset(-10);
            make.right.equalTo(self.mas_right).offset(-10);
            
            
            
            
        }

    }];
    
    [super updateConstraints];
}
- (void)moveAction:(UIButton *)myButton {
    self.isAtTop = !self.isAtTop;
    //告诉约束他们需要更新
    [self setNeedsUpdateConstraints];
    //立刻更新视图约束
    [self updateConstraintsIfNeeded];
    [UIView animateWithDuration:0.3 animations:^{
        [self layoutIfNeeded];
    }];
}
/*
// Only override drawRect: if you perform custom drawing.
// An empty implementation adversely affects performance during animation.
- (void)drawRect:(CGRect)rect {
    // Drawing code
}
*/

@end

这里主要使用了mas_remakeConstraints:方法。

场景四、两个视图的嵌套

实现代码：

//
//  NestConstraintsView.m
//  MasonryDemo
//
//  Created by zhanggui on 15/10/26.
//  Copyright © 2015年 zhanggui. All rights reserved.
//

#import "NestConstraintsView.h"
#import "Masonry.h"
@implementation NestConstraintsView

- (id)init {
    self = [super init];
    if (self) {
        UIView *bigView = [[UIView alloc] init];
        bigView.backgroundColor = [UIColor blackColor];
        [self addSubview:bigView];
        
        UIView *smallView = [[UIView alloc] init];
        smallView.backgroundColor = [UIColor redColor];
        [self addSubview:smallView];
        
        [bigView mas_makeConstraints:^(MASConstraintMaker *make) {
            make.top.equalTo(self).offset(20);
            make.left.equalTo(self).offset(20);
            make.bottom.equalTo(self).offset(-20);
            make.right.equalTo(self).offset(-20);
        }];
        [smallView mas_makeConstraints:^(MASConstraintMaker *make) {
            make.top.equalTo(bigView.mas_top).offset(40);
            make.left.equalTo(bigView.mas_left).offset(40);
            make.bottom.equalTo(bigView.mas_bottom).offset(-40);
            make.right.equalTo(bigView.mas_right).offset(-40);
        }];
    }
    return self;
}
@end

这里和第一个场景一样，都是最基本的实现约束的添加，只不过相对参照物不同。

场景五、多个view一起布局（以组为单位布局）

效果：

实现代码：

//
//  GroupButtonView.m
//  MasonryDemo
//
//  Created by zhanggui on 15/10/26.
//  Copyright © 2015年 zhanggui. All rights reserved.
//

#import "GroupButtonView.h"
#import "Masonry.h"
@implementation GroupButtonView

- (instancetype)init {
    self  = [super init];
    if (self) {
        NSArray *strArr = @[@"10",@"20",@"50",@"100",@"200",@"300"];
        NSMutableArray *mutableArr = [[NSMutableArray alloc] initWithCapacity:6];
        for (int i=0; i<3; i++) {
            UIButton *button = [[UIButton alloc] init];
            [button setTitle:strArr[i] forState:UIControlStateNormal];
            [button setTitleColor:[UIColor blackColor] forState:UIControlStateNormal];
            button.layer.borderColor = [UIColor blackColor].CGColor;
            [button addTarget:self action:@selector(show:) forControlEvents:UIControlEventTouchUpInside];
            button.layer.borderWidth = 2;
            [self addSubview:button];
            [mutableArr addObject:button];
        }

                [mutableArr mas_distributeViewsAlongAxis:MASAxisTypeHorizontal withFixedSpacing:20 leadSpacing:20 tailSpacing:20];
                [mutableArr mas_makeConstraints:^(MASConstraintMaker *make) {
                    make.top.equalTo(@120);
                    make.height.equalTo(@75);
                }];
        /**
         *  -----------------------
         */
        NSMutableArray *marr = [NSMutableArray new];
        for (int i=3; i<6; i++) {
            UIButton *button = [[UIButton alloc] init];
            [button setTitle:strArr[i] forState:UIControlStateNormal];
            [button setTitleColor:[UIColor blackColor] forState:UIControlStateNormal];
            button.layer.borderColor = [UIColor blackColor].CGColor;
            [button addTarget:self action:@selector(show:) forControlEvents:UIControlEventTouchUpInside];
            button.layer.borderWidth = 2;
            [self addSubview:button];
            [marr addObject:button];
        }
        
        [marr mas_distributeViewsAlongAxis:MASAxisTypeHorizontal withFixedSpacing:20 leadSpacing:20 tailSpacing:20];
        [marr mas_makeConstraints:^(MASConstraintMaker *make) {
            make.top.equalTo(@200);
            make.height.equalTo(@75);
        }];

        
        }
    return self;
}
- (void)show:(UIButton *)button
{
    NSLog(@"%@",button.titleLabel.text);
}
@end

在这里，我们主要就是用到了mas_distributeViewsAlongAxis:...这个方法，来万曾一组视图的布局。

场景六、自己写的一个简单的登录界面

效果如下：

代码如下：

//
//  ViewController.m
//  MasonryDemo
//
//  Created by zhanggui on 15/10/8.
//  Copyright © 2015年 zhanggui. All rights reserved.
//

#import "ViewController.h"
#import "Masonry.h"
#import "ZGBasicView.h"
#import "UpdateConstraintsView.h"
#import "ReBackConstraintsView.h"
#import "NestConstraintsView.h"
#import "GroupButtonView.h"
#import "LoginView.h"
#import "ArrayView.h"
@interface ViewController ()

@end

@implementation ViewController

- (void)viewDidLoad {
    [super viewDidLoad];
    self.title  = @"登录";
    
    [self loginView];
//    [self addArrayView];


}
- (void)loginView {
    LoginView *loginView = [[LoginView alloc] init];
    self.view = loginView;
//    loginView.frame = self.view.frame;
//    [self.view addSubview:loginView];
}
- (void)addArrayView {
    ArrayView *arrView = [[ArrayView alloc] init];
    self.view = arrView;
}
- (void)groupButtonView {
    GroupButtonView *nestView = [[GroupButtonView alloc] init];
    nestView.frame = self.view.frame;
//    self.view = nestView;
    [self.view addSubview:nestView];
}
- (void)nestConstraintsView {
    NestConstraintsView *nestView = [[NestConstraintsView alloc] init];
    self.view = nestView;

}
- (void)reBackConstraints {
    ReBackConstraintsView *rebackView = [[ReBackConstraintsView alloc] init];
    self.view = rebackView;
}
- (void)updateConstraintsView {
    UpdateConstraintsView *updateView = [[UpdateConstraintsView alloc] init];
    self.view = updateView;
}
- (void)simpleView {
    ZGBasicView *basicView = [[ZGBasicView alloc] init];
//    [self.view addSubview:basicView];
    self.view = basicView;
}
- (void)firstSimpleView {
    UIView *superview = self.view;
    UIView *view1 = [[UIView alloc] init];
    view1.translatesAutoresizingMaskIntoConstraints = NO;
    view1.backgroundColor = [UIColor greenColor];
    [superview addSubview:view1];
    
    UIEdgeInsets padding = UIEdgeInsetsMake(74, 10, 10, 10);
    [view1 mas_makeConstraints:^(MASConstraintMaker *make) {
        make.edges.equalTo(superview).with.insets(padding);
    }];
    //    [view1 mas_makeConstraints:^(MASConstraintMaker *make) {
    //        make.top.equalTo(superview.mas_top).offset(padding.top);
    //        make.left.equalTo(superview.mas_left).offset(padding.left);
    //        make.bottom.equalTo(superview.mas_bottom).offset(-padding.bottom);
    //        make.right.equalTo(superview.mas_right).offset(-padding.right);
    //    }];
}
@end

大家可以简单的看一下，写的比较简单，应该很容易理解的。（横屏的距离上边的高度没有处理太好，将就着看吧）

简单就介绍这么多了。

附：

　　1、源码下载地址：http://pan.baidu.com/s/1o6083G2

　　2、Masonry Git地址：https://github.com/SnapKit/Masonry