今天安装k8sV1.16的版本时候，执行突然发现命令不对，之前安装V1.15的时候是可以的，可能是版本升级的原因。
解决：
unknown flag: --experimental-upload-certs，将–experimental-upload-certs 替换为 --upload-certs
[root@k8s-master opt]# kubeadm init --config=kubeadm-config.yaml --experimental-upload-certs | tee kubeadm-init.log Error: unknown flag: --experimental-upload-certs Usage: kubeadm init [flags] kubeadm init [command] Available Commands: phase Use this command to invoke single phase of the init workflow Flags: --apiserver-advertise-address string The IP address the API Server will advertise it's listening on. If not set the default network interface will be used. --apiserver-bind-port int32 Port for the API Server to bind to. (default 6443) --apiserver-cert-extra-sans strings Optional extra Subject Alternative Names (SANs) to use for the API Server serving certificate. Can be both IP addresses and DNS names. --cert-dir string The path where to save and store the certificates. (default "/etc/kubernetes/pki") --certificate-key string Key used to encrypt the control-plane certificates in the kubeadm-certs Secret. --config string Path to a kubeadm configuration file. --control-plane-endpoint string Specify a stable IP address or DNS name for the control plane. --cri-socket string Path to the CRI socket to connect. If empty kubeadm will try to auto-detect this value; use this option only if you have more than one CRI installed or if you have non-standard CRI socket. --dry-run Don't apply any changes; just output what would be done. -k, --experimental-kustomize string The path where kustomize patches for static pod manifests are stored. --feature-gates string A set of key=value pairs that describe feature gates for various features. Options are: IPv6DualStack=true|false (ALPHA - default=false) -h, --help help for init --ignore-preflight-errors strings A list of checks whose errors will be shown as warnings. Example: 'IsPrivilegedUser,Swap'. Value 'all' ignores errors from all checks. --image-repository string Choose a container registry to pull control plane images from (default "k8s.gcr.io") --kubernetes-version string Choose a specific Kubernetes version for the control plane. (default "stable-1") --node-name string Specify the node name. --pod-network-cidr string Specify range of IP addresses for the pod network. If set, the control plane will automatically allocate CIDRs for every node. --service-cidr string Use alternative range of IP address for service VIPs. (default "10.96.0.0/12") --service-dns-domain string Use alternative domain for services, e.g. "myorg.internal". (default "cluster.local") --skip-certificate-key-print Don't print the key used to encrypt the control-plane certificates. --skip-phases strings List of phases to be skipped --skip-token-print Skip printing of the default bootstrap token generated by 'kubeadm init'. --token string The token to use for establishing bidirectional trust between nodes and control-plane nodes. The format is [a-z0-9]{6}.[a-z0-9]{16} - e.g. abcdef.0123456789abcdef --token-ttl duration The duration before the token is automatically deleted (e.g. 1s, 2m, 3h). If set to '0', the token will never expire (default 24h0m0s) --upload-certs Upload control-plane certificates to the kubeadm-certs Secret. Global Flags: --add-dir-header If true, adds the file directory to the header --log-file string If non-empty, use this log file --log-file-max-size uint Defines the maximum size a log file can grow to. Unit is megabytes. If the value is 0, the maximum file size is unlimited. (default 1800) --rootfs string [EXPERIMENTAL] The path to the 'real' host root filesystem. --skip-headers If true, avoid header prefixes in the log messages --skip-log-headers If true, avoid headers when opening log files -v, --v Level number for the log level verbosity Use "kubeadm init [command] --help" for more information about a command. unknown flag: --experimental-upload-certs To see the stack trace of this error execute with --v=5 or higher [root@k8s-master opt]# kubeadm init --config=kubeadm-config.yaml --upload-certs | tee kubeadm-init.log [init] Using Kubernetes version: v1.16.1 [preflight] Running pre-flight checks [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/ [preflight] Pulling images required for setting up a Kubernetes cluster [preflight] This might take a minute or two, depending on the speed of your internet connection [preflight] You can also perform this action in beforehand using 'kubeadm config images pull' [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env" [kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml" [kubelet-start] Activating the kubelet service [certs] Using certificateDir folder "/etc/kubernetes/pki" [certs] Generating "ca" certificate and key [certs] Generating "apiserver" certificate and key [certs] apiserver serving cert is signed for DNS names [k8s-master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.180.121] [certs] Generating "apiserver-kubelet-client" certificate and key [certs] Generating "front-proxy-ca" certificate and key [certs] Generating "front-proxy-client" certificate and key [certs] Generating "etcd/ca" certificate and key [certs] Generating "etcd/server" certificate and key [certs] etcd/server serving cert is signed for DNS names [k8s-master localhost] and IPs [192.168.180.121 127.0.0.1 ::1] [certs] Generating "etcd/peer" certificate and key [certs] etcd/peer serving cert is signed for DNS names [k8s-master localhost] and IPs [192.168.180.121 127.0.0.1 ::1] [certs] Generating "etcd/healthcheck-client" certificate and key [certs] Generating "apiserver-etcd-client" certificate and key [certs] Generating "sa" key and public key [kubeconfig] Using kubeconfig folder "/etc/kubernetes" [kubeconfig] Writing "admin.conf" kubeconfig file