Cobbler本机使用VM装机配置方法

一、需要在本地VM虚拟机上安装好Cobbler服务

安装服务及配置方法参见链接：https://www.cnblogs.com/cyleon/p/11460061.html

二、本地配置VM网络

网络适配器 --> 网络连接 --> 桥接模式（复制物理网络连接状态）

 三、配置cobbler主机的IP，服务的IP以及dhcp的IP

# 修改本地IP地址
[root@cobbler ~]# ifconfig eth0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.25.15  netmask 255.255.255.0  broadcast 192.168.25.255
        inet6 fe80::20c:29ff:fef6:5998  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:f6:59:98  txqueuelen 1000  (Ethernet)
        RX packets 537020  bytes 44218405 (42.1 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1996013  bytes 3004167768 (2.7 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

# 修改cobbler服务IP地址
[root@cobbler ~]# for i in 70 98 ;do awk "NR==$i" /etc/cobbler/settings ;done
next_server: 192.168.25.15
server: 192.168.25.15

#　修改线上环境的IP地址
[root@cobbler ~]# sed -n '21,28p' /etc/cobbler/dhcp.template 
subnet 192.168.25.0 netmask 255.255.255.0 {
     option routers             192.168.25.1;
     option domain-name-servers 114.114.114.114;
     option subnet-mask         255.255.255.0;
     range dynamic-bootp        192.168.25.100 192.168.25.254;
     default-lease-time         21600;
     max-lease-time             43200;
     next-server                $next_server;

[root@cobbler ~]# systemctl restart cobbler
[root@cobbler ~]# cobbler sync

四、本地网卡指定固定的IP地址

 接上交换机，启动需要安装系统的服务器即可进行安装。