查询Table name, Column name, 拼接执行sql文本, 游标, 存储过程, 临时表

018_Proc_UpdateTranslations.sql:

SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO

if (exists (select * from sys.objects where name = 'UpdateTranslationsForTable'))
    drop proc [UpdateTranslationsForTable]
go

CREATE PROCEDURE [dbo].[UpdateTranslationsForTable]
    (
    @tableName NVARCHAR(128)    
    )
AS
BEGIN
-- --- 
SET NOCOUNT ON
-- --- 
-- --- 
DECLARE @translationTableName NVARCHAR(128)
DECLARE @sql NVARCHAR(4000)

-- --- 
SET @tableName = REPLACE(@tableName, '''', '''''') -- injection protection
IF @tableName = '_dynamicText'
    BEGIN
        SET @translationTableName = @tableName
    END
ELSE
    BEGIN
        SET @translationTableName = @tableName + 'Translation'
    END


        -- ---------------------------------------------------------------------------
        -- --- Build strings of columns that we will insert into / select from
        -- --- Certain columns are NOT to be translated and those are listed here.
        -- --- 
        -- ---------------------------------------------------------------------------
        DECLARE @colTbl TABLE (rowId INT NOT NULL IDENTITY(1,1), columnName NVARCHAR(128), maxLen INT NULL, appendQ TINYINT NOT NULL, PRIMARY KEY (rowId))
        -- --- 
        INSERT INTO @colTbl (columnName, maxLen, appendQ)
        SELECT column_name, character_maximum_length, 
            CASE WHEN data_type = 'nvarchar' AND (character_maximum_length >= 100 OR character_maximum_length = -1)
                AND column_name NOT IN ('OwnerUserId', 'UserName', 'UserId', 'OwnerUserId', 'AssessingUserName', 
                'CompletedById', 'TargetAttractionRationale', 'ResourceFileName', 'ResourceURL')
            THEN 1 ELSE 0 END -- this case value indicates to only append ?xx- to certain columns, not these ones listed
        FROM INFORMATION_SCHEMA.COLUMNS 
        WHERE table_name = @translationTableName
        AND column_name NOT IN ('Language', 'Id', 'tVersion','IsSynchronized')
        ORDER BY ordinal_position
        -- --- 
        DECLARE @update NVARCHAR(4000)
        DECLARE @colName NVARCHAR(128)
        DECLARE @conditions NVARCHAR(128)
        DECLARE @appendQ TINYINT
        DECLARE @colLen NVARCHAR(20) -- for nvarchar columns, this is the column size number converted to nvarchar
        DECLARE @minRow INT
        DECLARE @maxRow INT
        SELECT @minRow = MIN(rowId), @maxRow = MAX(rowId) FROM @colTbl
        WHILE (@minRow <= @maxRow)
            BEGIN
            SELECT @colName = columnName, @appendQ = appendQ, @colLen = CAST(CASE WHEN maxLen = -1 THEN 4000 ELSE maxLen END AS VARCHAR) FROM @colTbl WHERE rowId = @minRow
            
            SET @update = ISNULL(@update + ', ', '') + '[' + @colName + ']='+ CASE WHEN @appendQ = 1 THEN 'SUBSTRING([' + @colName + '], 5, ' + @colLen + ')' ELSE @colName END
            SET @conditions = ISNULL(@conditions + 'and ', '') + '[' + @colName + '] like ''?en-%'' '
            
            SET @minRow = @minRow + 1
            END                
        -- ---------------------------------------------------------------------------
        -- --- update certain languages in the translation table
        ------------------------------------------------------------------------------    

        SET @sql = N'UPDATE ' + @translationTableName + ' SET '+@update+' where language like ''en-%'' and '+@conditions

            
        EXEC sp_executesql @statement = @sql    
        

END

019_Cur_UpdateTranslations.sql :

-- ===================================================================================
-- === Script to update translations for specified languages to be the same as xx-XX in all translations tables
-- ===================================================================================
DECLARE @sql NVARCHAR(4000),@tableName NVARCHAR(128)
-- === 
PRINT '--============ Starting Update for All Translations ============--'
-- ===================================================================================
-- === create a cursor for each sql table that holds translated data
-- ===================================================================================
DECLARE tableCursor CURSOR FOR
    -- Select all tables that follow the 'standard' translations system
    SELECT T.name
    FROM sys.tables T
    WHERE EXISTS (SELECT NULL FROM sys.tables TT WHERE TT.name = T.name + 'Translation')
    AND T.name NOT IN ('Permission')    
    -- Add any tables that follow the 'standard' translations system
    UNION SELECT '_dynamicText'
    
    
OPEN tableCursor
FETCH tableCursor INTO @tableName
WHILE @@FETCH_STATUS = 0
    BEGIN
    PRINT ''
    PRINT '------ Updating Translations For ' + @tableName + ' ------'    
    
    EXEC UpdateTranslationsForTable @tableName
    
    PRINT '------ Update Translations For ' + @tableName + ' Done ------'
    
    FETCH tableCursor INTO @tableName
    END
CLOSE tableCursor
DEALLOCATE tableCursor
PRINT '--============ Finished Updating All Translations ============--'

SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
 
if (exists (select * from sys.objects where name = 'UpdateTranslationsForTable'))
    drop proc [UpdateTranslationsForTable]
go
 
CREATE PROCEDURE [dbo].[UpdateTranslationsForTable]
	(
	@tableName NVARCHAR(128)	
	)
AS
BEGIN
-- --- 
SET NOCOUNT ON
-- --- 
-- --- 
DECLARE @translationTableName NVARCHAR(128)
DECLARE @sql NVARCHAR(4000)
 
-- --- 
SET @tableName = REPLACE(@tableName, '''', '''''') -- injection protection
IF @tableName = '_dynamicText'
	BEGIN
		SET @translationTableName = @tableName
	END
ELSE
	BEGIN
		SET @translationTableName = @tableName + 'Translation'
	END
 
 
		-- ---------------------------------------------------------------------------
		-- --- Build strings of columns that we will insert into / select from
		-- --- Certain columns are NOT to be translated and those are listed here.
		-- --- 
		-- ---------------------------------------------------------------------------
		DECLARE @colTbl TABLE (rowId INT NOT NULL IDENTITY(1,1), columnName NVARCHAR(128), maxLen INT NULL, appendQ TINYINT NOT NULL, PRIMARY KEY (rowId))
		-- --- 
		INSERT INTO @colTbl (columnName, maxLen, appendQ)
		SELECT column_name, character_maximum_length, 
			CASE WHEN data_type = 'nvarchar' AND (character_maximum_length >= 100 OR character_maximum_length = -1)
				AND column_name NOT IN ('OwnerUserId', 'UserName', 'UserId', 'OwnerUserId', 'AssessingUserName', 
				'CompletedById', 'TargetAttractionRationale', 'ResourceFileName', 'ResourceURL')
			THEN 1 ELSE 0 END -- this case value indicates to only append ?xx- to certain columns, not these ones listed
		FROM INFORMATION_SCHEMA.COLUMNS 
		WHERE table_name = @translationTableName
		AND column_name NOT IN ('Language', 'Id', 'tVersion','IsSynchronized')
		ORDER BY ordinal_position
		-- --- 
		DECLARE @update NVARCHAR(4000)
		DECLARE @colName NVARCHAR(128)
		DECLARE @conditions NVARCHAR(128)
		DECLARE @appendQ TINYINT
		DECLARE @colLen NVARCHAR(20) -- for nvarchar columns, this is the column size number converted to nvarchar
		DECLARE @minRow INT
		DECLARE @maxRow INT
		SELECT @minRow = MIN(rowId), @maxRow = MAX(rowId) FROM @colTbl
		WHILE (@minRow <= @maxRow)
			BEGIN
			SELECT @colName = columnName, @appendQ = appendQ, @colLen = CAST(CASE WHEN maxLen = -1 THEN 4000 ELSE maxLen END AS VARCHAR) FROM @colTbl WHERE rowId = @minRow
			
			SET @update = ISNULL(@update + ', ', '') + '[' + @colName + ']='+ CASE WHEN @appendQ = 1 THEN 'SUBSTRING([' + @colName + '], 5, ' + @colLen + ')' ELSE @colName END
			SET @conditions = ISNULL(@conditions + 'and ', '') + '[' + @colName + '] like ''?en-%'' '
			
			SET @minRow = @minRow + 1
			END				
		-- ---------------------------------------------------------------------------
		-- --- update certain languages in the translation table
		------------------------------------------------------------------------------	
 
		SET @sql = N'UPDATE ' + @translationTableName + ' SET '+@update+' where language like ''en-%'' and '+@conditions
 
			
		EXEC sp_executesql @statement = @sql	
		
 
END