Ethernet LEDs
The Ethernet port has two LEDs: Link/Act and 10/100. The Link/Act LED should be ON at each end of the Ethernet cable. If the Link/Act LED is not ON, it usually indicates that there is a bad connection or a bad cable. See the table below for the meaning of each LED and its state.
LED State Table: Ethernet
| LED | Meaning | State |
| Link/Act | Link Activity | ON = link active |
| BLINK = network activity | ||
| OFF = link inactive | ||
| 10/100 | Baud Rate / Network Speed | ON = 100Mb |
| OFF = 10Mb |