• hdu 1072 Nightmare(bfs)


    hdu 1072 Nightmare

    Problem Description
    Ignatius had a nightmare last night. He found himself in a labyrinth with a time bomb on him. The labyrinth has an exit, Ignatius should get out of the labyrinth before the bomb explodes. The initial exploding time of the bomb is set to 6 minutes. To prevent the bomb from exploding by shake, Ignatius had to move slowly, that is to move from one area to the nearest area(that is, if Ignatius stands on (x,y) now, he could only on (x+1,y), (x-1,y), (x,y+1), or (x,y-1) in the next minute) takes him 1 minute. Some area in the labyrinth contains a Bomb-Reset-Equipment. They could reset the exploding time to 6 minutes.

    Given the layout of the labyrinth and Ignatius' start position, please tell Ignatius whether he could get out of the labyrinth, if he could, output the minimum time that he has to use to find the exit of the labyrinth, else output -1.

    Here are some rules:
    1. We can assume the labyrinth is a 2 array.
    2. Each minute, Ignatius could only get to one of the nearest area, and he should not walk out of the border, of course he could not walk on a wall, too.
    3. If Ignatius get to the exit when the exploding time turns to 0, he can't get out of the labyrinth.
    4. If Ignatius get to the area which contains Bomb-Rest-Equipment when the exploding time turns to 0, he can't use the equipment to reset the bomb.
    5. A Bomb-Reset-Equipment can be used as many times as you wish, if it is needed, Ignatius can get to any areas in the labyrinth as many times as you wish.
    6. The time to reset the exploding time can be ignore, in other words, if Ignatius get to an area which contain Bomb-Rest-Equipment, and the exploding time is larger than 0, the exploding time would be reset to 6.
     

    Input
    The input contains several test cases. The first line of the input is a single integer T which is the number of test cases. T test cases follow.
    Each test case starts with two integers N and M(1<=N,Mm=8) which indicate the size of the labyrinth. Then N lines follow, each line contains M integers. The array indicates the layout of the labyrinth.
    There are five integers which indicate the different type of area in the labyrinth:
    0: The area is a wall, Ignatius should not walk on it.
    1: The area contains nothing, Ignatius can walk on it.
    2: Ignatius' start position, Ignatius starts his escape from this position.
    3: The exit of the labyrinth, Ignatius' target position.
    4: The area contains a Bomb-Reset-Equipment, Ignatius can delay the exploding time by walking to these areas.
     

    Output
    For each test case, if Ignatius can get out of the labyrinth, you should output the minimum time he needs, else you should just output -1.
     

    Sample Input
    3 3 3 2 1 1 1 1 0 1 1 3 4 8 2 1 1 0 1 1 1 0 1 0 4 1 1 0 4 1 1 0 0 0 0 0 0 1 1 1 1 4 1 1 1 3 5 8 1 2 1 1 1 1 1 4 1 0 0 0 1 0 0 1 1 4 1 0 1 1 0 1 1 0 0 0 0 3 0 1 1 1 4 1 1 1 1 1 
     

    Sample Output
    4 -1 13

    简单广搜题:

    #include<iostream>
    #include<queue>
    using namespace std;
    int map[10][10];
    int mark[10][10];
    int n,m;
    struct nod
    {
     int x,y,step,time;
    }d,p;
    int cx[]={0,0,-1,1};
    int cy[]={-1,1,0,0};
    int bfs(int x,int y)
    {
     memset(mark,-1,sizeof(mark));
     queue<nod> q;
     d.x=x;
     d.y=y;
     d.step=0;
     d.time=0;
     q.push(d);
     mark[x][y]=0;
     while(!q.empty())
     {
      p=q.front();
      q.pop();
      if(map[p.x][p.y]==3)
       return 1;
      if(p.time==5)
       continue;
      
      int i;
      for(i=0;i<4;i++)
      {
       d.x=p.x+cx[i];
       d.y=p.y+cy[i];
       if(d.x>=0&&d.x<n&&d.y>=0&&d.y<m&&map[d.x][d.y]!=0&&(mark[d.x][d.y]>p.time||mark[d.x][d.y]==-1))
       {
        d.step=p.step+1;
        d.time=p.time+1;
        mark[d.x][d.y]=d.time;
        if(map[d.x][d.y]==4)
         mark[d.x][d.y]=d.time=0;
        q.push(d);
       }
      }
     }
     return 0;
    }
    int main()
    {
     int t;
     scanf("%d",&t);
     while(t--)
     {
      scanf("%d%d",&n,&m);
      int i,j,sx,sy,ex,ey;
      for(i=0;i<n;i++)
       for(j=0;j<m;j++)
       {
        scanf("%d",&map[i][j]);
        if(map[i][j]==2)
         sx=i,sy=j;
        if(map[i][j]==3)
         ex=i,ey=j;
       }
      printf("%d\n",bfs(sx,sy)?p.step:-1);  
     }
     return 0;
    }

  • 相关阅读:
    大数据量业务订制和解决方案思考
    gc内存回收机制
    HashMap的扩容机制, ConcurrentHashMap和Hashtable主要区别
    开源工作流引擎内核主要关心的是什么?
    mysql查询计划
    mysql 存储引擎MYSIAM和INNODB特性比较
    任意输入字符,对字符匹配进行判断
    java 对list中对象按属性排序
    mysql 写数据操作几次硬盘?
    win7_64位+U盘制作centos6.3+安装centos
  • 原文地址:https://www.cnblogs.com/crazyapple/p/2999441.html
Copyright © 2020-2023  润新知