光纤交换机增加zone配置

光纤交换机当前配置情况如下：

switchshow
switchName:    swd77
switchType:    71.2
switchState:    Online  
switchMode:    Native
switchRole:    Principal
switchDomain:    1
switchId:    fffc01
switchWwn:    10:00:00:05:33:c9:62:95
zoning:        ON (cfg_1)
switchBeacon:    OFF

Index Port Address Media Speed State     Proto
==============================================
  0   0   010000   id    N8   Online      FC  F-Port  50:06:0e:80:10:05:e3:d0
  1   1   010100   id    N4   Online      FC  F-Port  21:01:00:e0:8b:ae:e9:64
  2   2   010200   id    N8   Online      FC  F-Port  50:06:0e:80:10:05:e3:d8
  3   3   010300   id    N8   No_Light    FC 
  4   4   010400   id    N4   Online      FC  F-Port  21:00:00:24:ff:03:df:65
  5   5   010500   id    N4   Online      FC  F-Port  21:00:00:24:ff:03:e0:23
  6   6   010600   id    N4   Online      FC  F-Port  21:00:00:24:ff:03:f9:d2
  7   7   010700   id    N4   Online      FC  F-Port  21:00:00:24:ff:03:fa:0f
  8   8   010800   --    N8   No_Module   FC  (No POD License) Disabled
  9   9   010900   --    N8   No_Module   FC  (No POD License) Disabled
10  10   010a00   --    N8   No_Module   FC  (No POD License) Disabled
11  11   010b00   --    N8   No_Module   FC  (No POD License) Disabled
12  12   010c00   --    N8   No_Module   FC  (No POD License) Disabled
13  13   010d00   --    N8   No_Module   FC  (No POD License) Disabled
14  14   010e00   --    N8   No_Module   FC  (No POD License) Disabled
15  15   010f00   --    N8   No_Module   FC  (No POD License) Disabled
16  16   011000   --    N8   No_Module   FC  (No POD License) Disabled
17  17   011100   --    N8   No_Module   FC  (No POD License) Disabled
18  18   011200   --    N8   No_Module   FC  (No POD License) Disabled
19  19   011300   --    N8   No_Module   FC  (No POD License) Disabled
20  20   011400   --    N8   No_Module   FC  (No POD License) Disabled
21  21   011500   --    N8   No_Module   FC  (No POD License) Disabled
22  22   011600   --    N8   No_Module   FC  (No POD License) Disabled
23  23   011700   --    N8   No_Module   FC  (No POD License) Disabled
swd77:admin>
swd77:admin> cfgshow
Defined configuration:
cfg:    cfg_1    CAS1; CAS2; CDB1; CDB2
zone:    CAS1    AMS2500_0a; AMS2500_0b; AMS2500_1a; AMS2500_1b; CAS_FC_A
zone:    CAS2    AMS2500_0a; AMS2500_0b; AMS2500_1a; AMS2500_1b; CAS_FC_B
zone:    CDB1    AMS2500_0a; AMS2500_0b; AMS2500_1a; AMS2500_1b; CDB_FC_A
zone:    CDB2    AMS2500_0a; AMS2500_0b; AMS2500_1a; AMS2500_1b; CDB_FC_B
alias:    AMS2500_0a   
        1,0
alias:    AMS2500_0b   
        1,1
alias:    AMS2500_1a   
        1,2
alias:    AMS2500_1b   
        1,3
alias:    CAS_FC_A   
        1,6
alias:    CAS_FC_B   
        1,7
alias:    CDB_FC_A   
        1,4
alias:    CDB_FC_B   
        1,5

Effective configuration:
cfg:    cfg_1   
zone:    CAS1    1,0
        1,1
        1,2
        1,3
        1,6
zone:    CAS2    1,0
        1,1
        1,2
        1,3
        1,7
zone:    CDB1    1,0
        1,1
        1,2
        1,3
        1,4
zone:    CDB2    1,0
        1,1
        1,2
        1,3
        1,5

创建新zone，并保存.

swd77:admin> zonecreate "MCC_OFS1", "50:06:0e:80:10:05:e3:d0; 50:06:0e:80:10:05:
e3:d8; 21:01:00:e0:8b:ae:e9:64"

swd77:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only?  (yes, y, no, n): [no] yes
sw0 Updating flash ...
2012/05/15-09:19:11, [ZONE-1024], 51, FID 128, INFO, swd77, cfgSave completes successfully.

Updating flash ...

将新建的zone加入到configuration中，并保存.

swd77:admin> cfgadd "cfg_1", "MCC_OFS1"

swd77:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only?  (yes, y, no, n): [no] yes
sw0 Updating flash ...
2012/05/15-09:22:02, [ZONE-1024], 52, FID 128, INFO, swd77, cfgSave completes successfully.

Updating flash ...

enable configuration,使新加的zone配置生效.

swd77:admin> cfgenable cfg_1
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes
to one or more traffic isolation zones, the update may result in 
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'cfg_1' configuration  (yes, y, no, n): [no] yes
2012/05/15-09:22:34, [ZONE-1004], 53, FID 128, INFO, swd77, port 0 (0x0) enforcement changed to Session Based HARD Zoning.
sw0 Updating flash ...
2012/05/15-09:22:34, [ZONE-1004], 54, FID 128, INFO, swd77, port 1 (0x1) enforcement changed to Session Based HARD Zoning.
2012/05/15-09:22:34, [ZONE-1004], 55, FID 128, INFO, swd77, port 2 (0x2) enforcement changed to Session Based HARD Zoning.
2012/05/15-09:22:35, [ZONE-1022], 56, FID 128, INFO, swd77, The effective configuration has changed to cfg_1. 
zone config "cfg_1" is in effect
Updating flash ...

swd77:admin> cfgactvshow

Effective configuration:
cfg:    cfg_1   
zone:    CAS1    1,0
        1,1
        1,2
        1,3
        1,6
zone:    CAS2    1,0
        1,1
        1,2
        1,3
        1,7
zone:    CDB1    1,0
        1,1
        1,2
        1,3
        1,4
zone:    CDB2    1,0
        1,1
        1,2
        1,3
        1,5
zone:    MCC_OFS1   
        50:06:0e:80:10:05:e3:d0
        50:06:0e:80:10:05:e3:d8
        21:01:00:e0:8b:ae:e9:64

上述命令显示新加的zone已经生效.