• linux上cocos2dx 环境配置


    1.cocos2dx 3.x开始要用到c++11,makefile文件中需要-std=c++11这个选项,

    所以升级g++参考 http://www.cnblogs.com/coolulu/p/4124803.html

    2.

    l参考 http://www.cocos2d-x.org/docs/manual/framework/native/v3/getting-started/how-to-run-cpp-tests-on-linux/en
           
      sudo apt-get install libx11-dev  
      sudo apt-get install libxmu-dev  
      sudo apt-get install libglu1-mesa-dev  
      sudo apt-get install libgl2ps-dev  
      sudo apt-get install libxi-dev  
      sudo apt-get install g++    
      sudo apt-get install libzip-dev  
      sudo apt-get install libpng12-dev  
      sudo apt-get install libcurl4-gnutls-dev  
      sudo apt-get install libfontconfig1-dev  
      sudo apt-get install libsqlite3-dev  
      sudo apt-get install libglew*-dev  
      sudo apt-get install libssl-dev  
           
      $ cd $cocos2dx_root/build    
      $ ./install-deps-linux.sh    
      $ mkdir linux-build    
      $ cd linux-build    
      $ cmake ../..    
      $ make(建议make -k遇到错误不中断,继续编译,节省时间)    
    问题1  解决 cocos2dx3.x 生成makefile g++需要支持-std=c++11编译选项 把g++升级到4.8.3    
           
    问题2  解决 Linking CXX executable ../../bin/cpp-empty-test/cpp-empty-test
      /usr/bin/ld: cannot find -lfmodex64  
      /usr/bin/ld: cannot find -lwebsockets  
      /usr/bin/ld: cannot find -ljpeg   sudo apt-get install libjpeg-dev
      /usr/bin/ld: cannot find -lwebp   sudo apt-get install libwebp-dev
      /usr/bin/ld: cannot find -ltiff   sudo apt-get install libtiff4-dev 
      collect2: 错误:ld 返回 1    
      make[2]: *** [bin/cpp-empty-test/cpp-empty-test] Error 1
      make[1]: *** [tests/cpp-empty-test/CMakeFiles/cpp-empty-test.dir/all] Error 2
      make: *** [all] Error 2    
           
    问题3  解决 /usr/bin/ld: cannot find -lfmodex64  
     翻墙 参考:http://ubuntuguide.org/wiki/Skulltag_tips 
     翻墙 参考:http://wiki.zandronum.com/Install_Zandronum_on_Ubuntu
      wget -c http://www.fmod.org/download/fmodex/api/Linux/fmodapi42416linux64.tar.gz
      make install    
      mv /usr/local/lib/libfmodex64-4.24.16.so /usr/local/lib/libfmodex64.so 
           
    问题4  解决 /usr/bin/ld: cannot find -lwebsockets  
      wget -c http://git.libwebsockets.org/cgi-bin/cgit/libwebsockets/snapshot/libwebsockets-1.3-chrome37-firefox30.tar.gz
      先要安装openssl    
      sudo apt-get install openssl   
      sudo apt-get install libssl-dev  
      cd 源代码目录    
      mkdir build    
      cd build    
      cmake ..    
      make    
      cd lib    
      vi /etc/ld.so.conf 添加/usr/local/lib  ldconfig  
           
    1 cp libwebsockets.so.4.0.0 /usr/local/lib/libwebsockets.so  这个方法后报 问题5
           
    问题5 解决 Linking CXX executable ../../bin/cpp-empty-test/cpp-empty-test
      ../../lib/libcocos2d.a(CCImage.cpp.o): In function `WebPIDecGetYUV':
      /home/melos1305/project/cocos2dx/cocos2d-x-3.1/external/webp/include/linux/decode.h:322: undefined reference to `WebPIDecGetYUVA'
      collect2: 错误:ld 返回 1    
      make[2]: *** [bin/cpp-empty-test/cpp-empty-test] Error 1
      make[2]: Target `tests/cpp-empty-test/CMakeFiles/cpp-empty-test.dir/build' not remade because of errors.
      make[1]: *** [tests/cpp-empty-test/CMakeFiles/cpp-empty-test.dir/all] Error 2
      [ 72%] Built target cpp-empty-test_CORE_PRE_BUILD  
      cpp-empty-test_PRE_BUILD ...  
           
      可能是sudo apt-get install libwebp-dev安装的版本对不上,sudo apt-get remove libwebp-dev
      后面自然好,在/external/webp/prebuilt/linux/64-bit/libwebp.a 转换成 libweb.so  ar -x libwebp.a;gcc -shared *.o -o libwebp.so
      一开始还是错的, mv libwebp.so libwebp.so111 删了libwebp.so编译过了
           
           
      计划去下载webp":"0.2.1的源代码编译  
      wget -c https://chromium.googlesource.com/webm/libwebp/+archive/74fefc8ce8d83946b763345575d6d2c608ba212a.tar.gz
           
    问题6 解决 melos1305@melos1305-B85M-DS3H:~/project/cocos2dx/cocos2d-x-3.1/build/linux-build/bin/cpp-empty-test$ ./cpp-empty-test     
      ./cpp-empty-test: /usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.18' not found (required by ./cpp-empty-test)
           
      1.  vi /etc/ld.so.conf 添加/usr/local/gcc-4.8.3/lib64/libstdc++.so.6 ldconfig 失败
           
      2. ln -si  /usr/local/gcc-4.8.3/lib64/libstdc++.so.6.0.19 libstdc++.so.6 
       ok  只能挂链接,服务端的ubuntu是64位,所以lib64/libstd++.so.6的默认版本不够,需要支持到GLIBCXX_3.4.18以上, 
      查看GLIBCXX信息 strings /usr/lib/x86_64-linux-gnu/libstdc++.so.6 | grep GLIBCXX
      strings /usr/local/gcc-4.8.3/lib64/libstdc++.so.6.0.19 | grep GLIBCXX

    编译完之后执行文件在cocos2d-x-3.1/build/linux-build/bin的子文件夹里

     

    3. 上面的找不到库文件的问题是,其实可以不用自己找,被坑了。

    因为svn服务器上默认不上传.a文件。类似的还有可能是.so文件。比如如果用了fmod库,提示找不到fmod库的.so文件的时候,

    看看svn设置里面的忽略文件类型。一般*.a和*.so都是被忽略的。任意文件夹右击,找到tortoiseSVN->属性(setting)->常规属性,右侧面板下方可看到。

    参考 http://blog.csdn.net/o_oxo_o/article/details/39377797

    参考 http://blog.csdn.net/lxd211/article/details/23977525

  • 相关阅读:
    Cassandra vs. HBase
    游戏留存率分析
    Writing a Discard Server
    t
    启动进程 派生 关闭而不关闭
    单页应用 SAP Vue
    TiDB 整体架构 结合yarn zookeeper分析架构
    Writing a Simple YARN Application 从hadoop生态抽出yarn ,单独使用yarn
    Phoenix put the sql back in NoSql
    事件序列化器 Flume 的无数据丢失保证,Channel 和事务
  • 原文地址:https://www.cnblogs.com/coolulu/p/4142342.html
Copyright © 2020-2023  润新知