• HDU 1026 Ignatius and the Princess I (广搜)


    题目链接

    Problem Description

    The Princess has been abducted by the BEelzebub feng5166, our hero Ignatius has to rescue our pretty Princess. Now he gets into feng5166's castle. The castle is a large labyrinth. To make the problem simply, we assume the labyrinth is a N*M two-dimensional array which left-top corner is (0,0) and right-bottom corner is (N-1,M-1). Ignatius enters at (0,0), and the door to feng5166's room is at (N-1,M-1), that is our target. There are some monsters in the castle, if Ignatius meet them, he has to kill them. Here is some rules:

    1.Ignatius can only move in four directions(up, down, left, right), one step per second. A step is defined as follow: if current position is (x,y), after a step, Ignatius can only stand on (x-1,y), (x+1,y), (x,y-1) or (x,y+1).

    2.The array is marked with some characters and numbers. We define them like this:

    . : The place where Ignatius can walk on.

    X : The place is a trap, Ignatius should not walk on it.

    n : Here is a monster with n HP(1<=n<=9), if Ignatius walk on it, it takes him n seconds to kill the monster.

    Your task is to give out the path which costs minimum seconds for Ignatius to reach target position. You may assume that the start position and the target position will never be a trap, and there will never be a monster at the start position.

    Input

    The input contains several test cases. Each test case starts with a line contains two numbers N and M(2<=N<=100,2<=M<=100) which indicate the size of the labyrinth. Then a N*M two-dimensional array follows, which describe the whole labyrinth. The input is terminated by the end of file. More details in the Sample Input.

    Output

    For each test case, you should output "God please help our poor hero." if Ignatius can't reach the target position, or you should output "It takes n seconds to reach the target position, let me show you the way."(n is the minimum seconds), and tell our hero the whole path. Output a line contains "FINISH" after each test case. If there are more than one path, any one is OK in this problem. More details in the Sample Output.

    Sample Input

    5 6
    .XX.1.
    ..X.2.
    2...X.
    ...XX.
    XXXXX.
    5 6
    .XX.1.
    ..X.2.
    2...X.
    ...XX.
    XXXXX1
    5 6
    .XX...
    ..XX1.
    2...X.
    ...XX.
    XXXXX.
    

    Sample Output

    It takes 13 seconds to reach the target position, let me show you the way.
    1s:(0,0)->(1,0)
    2s:(1,0)->(1,1)
    3s:(1,1)->(2,1)
    4s:(2,1)->(2,2)
    5s:(2,2)->(2,3)
    6s:(2,3)->(1,3)
    7s:(1,3)->(1,4)
    8s:FIGHT AT (1,4)
    9s:FIGHT AT (1,4)
    10s:(1,4)->(1,5)
    11s:(1,5)->(2,5)
    12s:(2,5)->(3,5)
    13s:(3,5)->(4,5)
    FINISH
    It takes 14 seconds to reach the target position, let me show you the way.
    1s:(0,0)->(1,0)
    2s:(1,0)->(1,1)
    3s:(1,1)->(2,1)
    4s:(2,1)->(2,2)
    5s:(2,2)->(2,3)
    6s:(2,3)->(1,3)
    7s:(1,3)->(1,4)
    8s:FIGHT AT (1,4)
    9s:FIGHT AT (1,4)
    10s:(1,4)->(1,5)
    11s:(1,5)->(2,5)
    12s:(2,5)->(3,5)
    13s:(3,5)->(4,5)
    14s:FIGHT AT (4,5)
    FINISH
    God please help our poor hero.
    FINISH
    

    分析:

    带路径的搜索,在搜索的时候额外吧路径保存下来。

    代码:

    #include<stdio.h>
    #include<string.h>
    #include<queue>
    using namespace std;
    struct node
    {
        int x;
        int y;
        int out;
        friend bool operator <(node a,node b)
        {
            return a.out>b.out;
        }
        int luj[1000][2];
    } now,then1;
    int bj[1000][1000];
    char tu[1000][1000];
    int n,m;
    int next1[4][2]= {{0,1},{0,-1},{-1,0},{1,0} };
    void bfs(int x,int y)
    {
        memset(bj,0,sizeof(bj));
        priority_queue<node> q;
        now.x=x;
        now.y=y;
        now.out=0;
        now.luj[0][0]=x;
        now.luj[0][1]=y;
        bj[x][y]=1;
        q.push(now);
        while(!q.empty())
        {
            now=q.top();
            if(now.x==n-1&&now.y==m-1)
            {
                int zbx=0,zby=0;
                printf("It takes %d seconds to reach the target position, let me show you the way.
    ",now.out);
                for(int i=0; i<now.out; i++)
                {
                    if(zbx==now.luj[i+1][0]&&zby==now.luj[i+1][1])
                    {
                        printf("%ds:FIGHT AT (%d,%d)
    ",i+1,now.luj[i+1][0],now.luj[i][1]);
                        zbx=now.luj[i+1][0];
                        zby=now.luj[i+1][1];
                        continue;
                    }
                    printf("%ds:(%d,%d)->(%d,%d)
    ",i+1,now.luj[i][0],now.luj[i][1],now.luj[i+1][0],now.luj[i+1][1]);
                    zbx=now.luj[i+1][0];
                    zby=now.luj[i+1][1];
                }
                printf("FINISH
    ");
                return ;
            }
            q.pop();
            for(int i=0; i<4; i++)
            {
                then1=now;
                then1.x=now.x+next1[i][0];
                then1.y=now.y+next1[i][1];
                if(then1.x>=0&&then1.x<n&&then1.y>=0&&then1.y<m&&bj[then1.x][then1.y]==0&&tu[then1.x][then1.y]!='X')
                {
                    if(tu[then1.x][then1.y]=='.')
                    {
                        then1.out=now.out+1;
                        then1.luj[then1.out][0]=then1.x;
                        then1.luj[then1.out][1]=then1.y;
                        bj[then1.x][then1.y]=1;
                        q.push(then1);
                    }
                    if(tu[then1.x][then1.y]>='1'&&tu[then1.x][then1.y]<='9')
                    {
                        int cishu=tu[then1.x][then1.y]-'0';
                        then1.out=now.out+1;
                        then1.luj[then1.out][0]=then1.x;
                        then1.luj[then1.out][1]=then1.y;
                        for(int k=0; k<cishu; k++)
                        {
                            then1.out+=1;
                            then1.luj[then1.out][0]=then1.x;
                            then1.luj[then1.out][1]=then1.y;
                            bj[then1.x][then1.y]=1;
                        }
                        q.push(then1);
                    }
                }
            }
        }
        printf("God please help our poor hero.
    FINISH
    ");
    }
    int main()
    {
        while(~scanf("%d%d",&n,&m))
        {
            for(int i=0; i<n; i++)
            {
                scanf("%s",tu[i]);
            }
            bfs(0,0);
        }
    }
  • 相关阅读:
    log4j日志配置
    map和java对象的转换方法
    阿里巴巴的json使用时的一些转换方法
    HttpClient发送Post和Get请求
    IT网站导航
    python学习
    git解决冲突
    协程
    Python实现协程
    异步任务神器 和定时任务Celery
  • 原文地址:https://www.cnblogs.com/cmmdc/p/6767408.html
Copyright © 2020-2023  润新知