kubeadm部署1.17.3[基于Ubuntu18.04]

基于 Ubuntu18.04 使用 kubeadm 部署Kubernetes 1.17.3 高可用集群

环境

所有节点初始化

# cat <<EOF>> /etc/hosts
192.168.1.210 k8s-m1
192.168.1.211 k8s-node1
192.168.1.212 k8s-node2
EOF
# vm1
hostnamectl  set-hostname k8s-m1
# vm2
hostnamectl  set-hostname k8s-node1
# vm3
hostnamectl  set-hostname k8s-node2
# 关闭Swap
swapoff -a && sysctl -w vm.swappiness=0
# 注释 fstab 中Swap 配置
sed -i 's/.*swap.*/#&/' /etc/fstab
cat /etc/fstab
# 设置路由转发以及bridge的数据进行处理
cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
modprobe br_netfilter
sysctl -p /etc/sysctl.d/k8s.conf
ls /proc/sys/net/bridge
# 资源配置文件
cat <<EOF >>  /etc/security/limits.conf
* soft nofile 51200 
* hard nofile 51200
EOF
cat <<EOF >>  /etc/pam.d/common-session
session required pam_limits.so
EOF
echo "ulimit -SHn 51200" >> /etc/profile
# 修改时区
timedatectl set-timezone Asia/Shanghai
timedatectl set-local-rtc 0
# 所有节点创建相关目录
mkdir -p /opt/k8s/{bin,work} /etc/{kubernetes,etcd}/cert
cd /opt/k8s/bin/
# 环境变量
cat <<EOF >> environment.sh
#!/usr/bin/bash
# 集群各机器 IP 数组
export NODE_IPS=(192.168.1.210 192.168.1.211 192.168.1.212)

# 集群各 IP 对应的主机名数组
export NODE_NAMES=(k8s-m1 k8s-node1 k8s-node2)

# etcd 集群服务地址列表
export ETCD_ENDPOINTS="https://192.168.1.210:2379,https://192.168.1.211:2379,https://192.168.1.212:2379"

# etcd 集群间通信的 IP 和端口
export ETCD_NODES="k8s-m1=https://192.168.1.210:2380,k8s-node1=https://192.168.1.211:2380,k8s-node2=https://192.168.1.212:2380"

# kube-apiserver 的反向代理地址端口
export KUBE_APISERVER="https://192.168.1.213:16443"

# etcd 数据目录
export ETCD_DATA_DIR="/data/k8s/etcd/data"

# etcd WAL 目录，建议是 SSD 磁盘分区，或者和 ETCD_DATA_DIR 不同的磁盘分区
export ETCD_WAL_DIR="/data/k8s/etcd/wal"

# k8s 各组件数据目录
export K8S_DIR="/data/k8s/k8s"
EOF

安装Docker 19.03

# 安装基础组件
apt update && apt install -y apt-transport-https software-properties-common ntp ntpdate
# 添加源
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
# 更新
apt update
# 列出当前安装Docker版本
apt-cache madison docker-ce
# 安装指定版本 19.03.7
apt install docker-ce=5:19.03.7~3-0~ubuntu-bionic

配置docker使用systemd

cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "log-driver": "json-file",
  "log-opts": {
    "max-size": "100m"
  },
  "storage-driver": "overlay2"
}
EOF

mkdir -p /etc/systemd/system/docker.service.d
systemctl daemon-reload
systemctl restart docker

指定版本1.17.3安装kubeadm/kubelet/kubectl

curl -fsSL https://mirrors.aliyun.com/kubernetes/apt/doc/apt-key.gpg | apt-key add -

cat <<EOF >/etc/apt/sources.list.d/kubernetes.list
deb http://mirrors.aliyun.com/kubernetes/apt/ kubernetes-xenial main
EOF
apt-get update
apt install kubernetes-cni
apt --fix-broken install
## 安装指定版本1.17.2安装kubeadm kubelet kubectl
dpkg -i http://mirrors.aliyun.com/kubernetes/apt/pool/kubeadm_1.17.3-00_amd64_a993cfe07313b10cb69c3d0a680fdc0f6f3976e226d5fe3d062be0cea265274c.deb
dpkg -i http://mirrors.aliyun.com/kubernetes/apt/pool/kubelet_1.17.3-00_amd64_f0b930ce4160af585fb10dc8e4f76747a60f04b6343c45405afbe79d380ae41f.deb
dpkg -i http://mirrors.aliyun.com/kubernetes/apt/pool/kubectl_1.17.3-00_amd64_289913506f67535270a8ab4d9b30e6ece825440bc00a225295915741946c7bc6.deb
###
apt-mark hold kubelet kubeadm kubectl docker-ce

启用ipvs模块

apt install ipvsadm ipset -y
# ipvs作为kube-proxy的转发机制，开启ipvs模块支持
modprobe ip_vs && modprobe ip_vs_rr && modprobe ip_vs_wrr && modprobe ip_vs_sh
# 开机启用的ipvs
cat <<EOF >> /etc/modules
ip_vs_rr
ip_vs_wrr
ip_vs_sh
ip_vs
EOF

创建证书

sudo mkdir -p /opt/k8s/cert && cd /opt/k8s/work

wget https://github.com/cloudflare/cfssl/releases/download/v1.4.1/cfssl_1.4.1_linux_amd64
mv cfssl_1.4.1_linux_amd64 /opt/k8s/bin/cfssl

wget https://github.com/cloudflare/cfssl/releases/download/v1.4.1/cfssljson_1.4.1_linux_amd64
mv cfssljson_1.4.1_linux_amd64 /opt/k8s/bin/cfssljson

wget https://github.com/cloudflare/cfssl/releases/download/v1.4.1/cfssl-certinfo_1.4.1_linux_amd64
mv cfssl-certinfo_1.4.1_linux_amd64 /opt/k8s/bin/cfssl-certinfo

chmod +x /opt/k8s/bin/*
export PATH=/opt/k8s/bin:$PATH
# CA 配置文件用于配置根证书 
cat > ca-config.json <<EOF
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ],
        "expiry": "876000h"
      }
    }
  }
}
EOF
# signing：表示该证书可用于签名其它证书（生成的 ca.pem 证书中 CA=TRUE）；
# server auth：表示 client 可以用该该证书对 server 提供的证书进行验证；
# client auth：表示 server 可以用该该证书对 client 提供的证书进行验证；
# "expiry": "876000h"：证书有效期设置为 100 年；
# 创建证书签名请求文件
cat >> ca-csr.json <<EOF
{
  "CN": "kubernetes-ca",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "opsnull"
    }
  ],
  "ca": {
    "expiry": "876000h"
 }
}
EOF
# CN：Common Name：kube-apiserver 从证书中提取该字段作为请求的用户名 (User Name)，浏览器使用该字段验证网站是否合法；
# O：Organization：kube-apiserver 从证书中提取该字段作为请求用户所属的组 (Group)；
# kube-apiserver 将提取的 User、Group 作为 RBAC 授权的用户标识；
# 注意：
# 不同证书 csr 文件的 CN、C、ST、L、O、OU 组合必须不同，否则可能出现 PEER'S CERTIFICATE HAS AN INVALID SIGNATURE 错误；
# 后续创建证书的 csr 文件时，CN 都不相同（C、ST、L、O、OU 相同），以达到区分的目的；
# 生成证书文件和私钥
cd /opt/k8s/work
cfssl gencert -initca ca-csr.json | cfssljson -bare ca
ls ca*
# 分发证书文件
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p /etc/kubernetes/cert"
    scp ca*.pem ca-config.json root@${node_ip}:/etc/kubernetes/cert
done

安装etcd集群

# 下载和分发 etcd 二进制文件 ，到 etcd 的 relase 页面下载最新的版本。

cd /opt/k8s/work
wget https://github.com/coreos/etcd/releases/download/v3.4.5/etcd-v3.4.5-linux-amd64.tar.gz
tar -xvf etcd-v3.4.5-linux-amd64.tar.gz
# 分发二进制文件到集群所有节点：
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
do
    echo ">>> ${node_ip}"
    scp etcd-v3.4.5-linux-amd64/etcd* root@${node_ip}:/opt/k8s/bin
    ssh root@${node_ip} "chmod +x /opt/k8s/bin/*"
done
# 创建 etcd 证书和私钥
# 创建证书签名请求：
cat > etcd-csr.json <<EOF
{
  "CN": "etcd",
  "hosts": [
    "127.0.0.1",
    "192.168.1.210",
    "192.168.1.211",
    "192.168.1.212"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "opsnull"
    }
  ]
}
EOF
# O: system:masters：kube-apiserver 收到使用该证书的客户端请求后，为请求添加组（Group）认证标识 system:masters；
# 预定义的 ClusterRoleBinding cluster-admin 将 Group system:masters 与 Role cluster-admin 绑定，该 Role 授予操作集群所需的最高权限；
# 该证书只会被 kubectl 当做 client 证书使用，所以 hosts 字段为空；
# 生成证书和私钥：
cfssl gencert -ca=/opt/k8s/work/ca.pem \
    -ca-key=/opt/k8s/work/ca-key.pem \
    -config=/opt/k8s/work/ca-config.json \
    -profile=kubernetes etcd-csr.json | cfssljson -bare etcd
# 分发生成的证书和私钥到各 etcd 节点：
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p /etc/etcd/cert"
    scp etcd*.pem root@${node_ip}:/etc/etcd/cert/
done
# 创建 etcd 的 systemd unit 模板文件
cat > etcd.service.template <<EOF
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos

[Service]
Type=notify
WorkingDirectory=${ETCD_DATA_DIR}
ExecStart=/opt/k8s/bin/etcd \\
  --data-dir=${ETCD_DATA_DIR} \\
  --wal-dir=${ETCD_WAL_DIR} \\
  --name=##NODE_NAME## \\
  --cert-file=/etc/etcd/cert/etcd.pem \\
  --key-file=/etc/etcd/cert/etcd-key.pem \\
  --trusted-ca-file=/etc/kubernetes/cert/ca.pem \\
  --peer-cert-file=/etc/etcd/cert/etcd.pem \\
  --peer-key-file=/etc/etcd/cert/etcd-key.pem \\
  --peer-trusted-ca-file=/etc/kubernetes/cert/ca.pem \\
  --peer-client-cert-auth \\
  --client-cert-auth \\
  --listen-peer-urls=https://##NODE_IP##:2380 \\
  --initial-advertise-peer-urls=https://##NODE_IP##:2380 \\
  --listen-client-urls=https://##NODE_IP##:2379,http://127.0.0.1:2379 \\
  --advertise-client-urls=https://##NODE_IP##:2379 \\
  --initial-cluster-token=etcd-cluster-0 \\
  --initial-cluster=${ETCD_NODES} \\
  --initial-cluster-state=new \\
  --auto-compaction-mode=periodic \\
  --auto-compaction-retention=1 \\
  --max-request-bytes=33554432 \\
  --quota-backend-bytes=6442450944 \\
  --heartbeat-interval=250 \\
  --election-timeout=2000
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF
# WorkingDirectory、--data-dir：指定工作目录和数据目录为 ${ETCD_DATA_DIR}，需在启动服务前创建这个目录；
# --wal-dir：指定 wal 目录，为了提高性能，一般使用 SSD 或者和 --data-dir 不同的磁盘；
# --name：指定节点名称，当 --initial-cluster-state 值为 new 时，--name 的参数值必须位于 --initial-cluster 列表中；
# --cert-file、--key-file：etcd server 与 client 通信时使用的证书和私钥；
# --trusted-ca-file：签名 client 证书的 CA 证书，用于验证 client 证书；
# --peer-cert-file、--peer-key-file：etcd 与 peer 通信使用的证书和私钥；
# --peer-trusted-ca-file：签名 peer 证书的 CA 证书，用于验证 peer 证书；
# 创建各个节点的etcd.service
source /opt/k8s/bin/environment.sh
for (( i=0; i < 3; i++ ))
do
    sed -e "s/##NODE_NAME##/${NODE_NAMES[i]}/" -e "s/##NODE_IP##/${NODE_IPS[i]}/" etcd.service.template > etcd-${NODE_IPS[i]}.service 
done
ls *.service
# NODE_NAMES 和 NODE_IPS 为相同长度的 bash 数组，分别为节点名称和对应的 IP；
# 分发生成的 systemd unit 文件：
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
do
    echo ">>> ${node_ip}"
    scp etcd-${node_ip}.service root@${node_ip}:/etc/systemd/system/etcd.service
done
# 启动 etcd 服务
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p ${ETCD_DATA_DIR} ${ETCD_WAL_DIR}"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable etcd && systemctl restart etcd " &
done
# 必须先创建 etcd 数据目录和工作目录;
# etcd 进程首次启动时会等待其它节点的 etcd 加入集群，命令 systemctl start etcd 会卡住一段时间，为正常现象
# 检查启动结果
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl status etcd|grep Active"
done
# 确保状态为 active (running)，否则查看日志，确认原因：
journalctl -u etcd
# 验证服务状态
# 部署完 etcd 集群后，在任一 etcd 节点上执行如下命令：
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
do
    echo ">>> ${node_ip}"
    /opt/k8s/bin/etcdctl \
    --endpoints=https://${node_ip}:2379 \
    --cacert=/etc/kubernetes/cert/ca.pem \
    --cert=/etc/etcd/cert/etcd.pem \
    --key=/etc/etcd/cert/etcd-key.pem endpoint health
done
# 预计输出：
>>> 192.168.1.210
https://192.168.1.210:2379 is healthy: successfully committed proposal: took = 36.897441ms
>>> 192.168.1.211
https://192.168.1.211:2379 is healthy: successfully committed proposal: took = 32.27599ms
>>> 192.168.1.212
https://192.168.1.212:2379 is healthy: successfully committed proposal: took = 33.600849ms
# 输出均为 healthy 时表示集群服务正常。
# 查看当前 leader
source /opt/k8s/bin/environment.sh
/opt/k8s/bin/etcdctl \
  -w table --cacert=/etc/kubernetes/cert/ca.pem \
  --cert=/etc/etcd/cert/etcd.pem \
  --key=/etc/etcd/cert/etcd-key.pem \
  --endpoints=${ETCD_ENDPOINTS} endpoint status
# output
+----------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
|          ENDPOINT          |        ID        | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
+----------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
| https://192.168.1.210:2379 | d5740bc3edef9ec9 |   3.4.5 |   20 kB |      true |      false |         2 |          8 |                  8 |        |
| https://192.168.1.211:2379 | 31a320d3d5b93e94 |   3.4.5 |   20 kB |     false |      false |         2 |          8 |                  8 |        |
| https://192.168.1.212:2379 | 3fea22316cddd69a |   3.4.5 |   20 kB |     false |      false |         2 |          8 |                  8 |        |
+----------------------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
# leader 为 192.168.1.210

部署LB的ApiServer

# 各个节点安装
apt install -y keepalived haproxy
# 创建keepalived配置文件
cat > /etc/keepalived/keepalived.conf << EOF
! Configuration File for keepalived

global_defs {
   router_id LVS_DEVEL
}

vrrp_script check_haproxy {
    script "killall -0 haproxy"
    interval 3
    weight -2
    fall 10
    rise 2
}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 51
    priority 250
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 2bba93d43c4495e0
    }
    virtual_ipaddress {
        192.168.1.213
    }
    track_script {
        check_haproxy
    }
}
EOF
# killall -0 haproxy : 根据进程名称检测进程是否存活
# interface : VIP 绑定到的网卡名
# virtual_ipaddress : 虚拟的 VIP
# state : master-1节点为MASTER，其余节点(master-2和master-3)为BACKUP
# priority : 各个节点优先级相差50（直接设置相同，效果相同），范围：0～250（非强制要求）
# 设置开机启动并检测 keepalived 状态
systemctl enable keepalived.service 
systemctl start keepalived.service
systemctl status keepalived.service
# 验证VIP是否生效
ip address show

# 添加hosts解析
echo "192.168.1.213 daemon.k8s.io">> /etc/hosts
# 创建haproxy配置文件
cat > /etc/haproxy/haproxy.cfg << EOF
#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
global
    # to have these messages end up in /var/log/haproxy.log you will
    # need to:
    #
    # 1) configure syslog to accept network log events.  This is done
    #    by adding the '-r' option to the SYSLOGD_OPTIONS in
    #    /etc/sysconfig/syslog
    #
    # 2) configure local2 events to go to the /var/log/haproxy.log
    #   file. A line like the following can be added to
    #   /etc/sysconfig/syslog
    #
    #    local2.*                       /var/log/haproxy.log
    #
    log         127.0.0.1 local2

    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     4000
    user        haproxy
    group       haproxy
    daemon

    # turn on stats unix socket
    stats socket /var/lib/haproxy/stats

#---------------------------------------------------------------------
# common defaults that all the 'listen' and 'backend' sections will
# use if not designated in their block
#---------------------------------------------------------------------
defaults
    mode                    http
    log                     global
    option                  httplog
    option                  dontlognull
    option http-server-close
    option forwardfor       except 127.0.0.0/8
    option                  redispatch
    retries                 3
    timeout http-request    10s
    timeout queue           1m
    timeout connect         10s
    timeout client          1m
    timeout server          1m
    timeout http-keep-alive 10s
    timeout check           10s
    maxconn                 3000

#---------------------------------------------------------------------
# kubernetes apiserver frontend which proxys to the backends
#---------------------------------------------------------------------
frontend kubernetes-apiserver
    mode                 tcp
    bind                 *:16443
    option               tcplog
    default_backend      kubernetes-apiserver

#---------------------------------------------------------------------
# round robin balancing between the various backends
#---------------------------------------------------------------------
backend kubernetes-apiserver
    mode        tcp
    balance     roundrobin
    server  k8s-m1 192.168.1.210:6443 check
    server  k8s-node1 192.168.1.211:6443 check
    server  k8s-node2 192.168.1.212:6443 check

#---------------------------------------------------------------------
# collection haproxy statistics message
#---------------------------------------------------------------------
listen stats
    bind                 *:1080
    stats auth           admin:awesomePassword
    stats refresh        5s
    stats realm          HAProxy\ Statistics
    stats uri            /admin?stats
EOF
# 只需要修改 server 即可
# haproxy 配置在其他 master 节点上相同
# 设置开机启动并检测 haproxy 状态
systemctl enable haproxy.service 
systemctl start haproxy.service 
systemctl status haproxy.service\
# 查看监听端口
netstat -anlt|grep -E "1080|16443"

使用 kubeadm 部署集群

# 创建 kubeadm-config.yaml 初始化配置文件
cat > kubeadm-config.yaml <<EOF
apiVersion: kubeadm.k8s.io/v1beta2
kind: ClusterConfiguration
kubernetesVersion: v1.17.3
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers
controlPlaneEndpoint: "daemon.k8s.io:16443"
apiServer:
  certSANs:
    - daemon.k8s.io
  extraArgs:
    authorization-mode: Node,RBAC
  timeoutForControlPlane: 4m0s
networking:
  dnsDomain: cluster.local
  podSubnet: 10.240.0.0/16
  serviceSubnet: 172.16.0.0/16
etcd:
    external:
        endpoints:
        - https://192.168.1.210:2379
        - https://192.168.1.211:2379
        - https://192.168.1.212:2379
        caFile: /etc/kubernetes/cert/ca.pem
        certFile: /etc/etcd/cert/etcd.pem
        keyFile: /etc/etcd/cert/etcd-key.pem
EOF
# 配置说明:
- kubernetesVersion: kubernetes 的版本号
- imageRepository: 镜像仓库，因为gcr.io 被墙，所以改用阿里云的镜像仓库
- controlPlaneEndpoint: 控制平面的端点，即为访问 apiserver 的地址
- podSubnet: pod 的地址池
- serviceSubnet: svc 的地址池
# 初始化命令
kubeadm init --config  kubeadm-config.yaml
# output 
Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:
	# 配置 kubectl 的 config
  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of control-plane nodes by copying certificate authorities
and service account keys on each node and then running the following as root:
	# 其他 master 节点上进行初始化的命令
  kubeadm join daemon.k8s.io:16443 --token o6cd4a.gvbrz7zioaykb8ma \
    --discovery-token-ca-cert-hash sha256:5321fe113e21db8ffd0e8c81748e66b1c565abd3xxxxxx \
    --control-plane

Then you can join any number of worker nodes by running the following on each as root:
	# 在其它 node 节点上进行初始化的命令。
kubeadm join daemon.k8s.io:16443 --token o6cd4a.gvbrz7zixxxxx \
    --discovery-token-ca-cert-hash sha256:5321fe113e21db8ffd0e8c81748e662222222
# 相关解释
- 第一组命令，配置 kubectl 的 config。
- 第二组命令，在其它 master 节点上进行初始化的命令。
- 第三组命令，在其它 work 节点上进行初始化的命令。
- 这里只需要运行第一组命令，配置好 kubectl 的配置文件，能使用 cli 控制集群。
# 执行一下配置命令
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
第二组和第三组命令需要记录一下。

安装 calico 网络插件

# rbac & daemonset 
curl -LO https://docs.projectcalico.org/v3.11/manifests/calico.yaml
sed -i "s#192\.168\.0\.0/16#10\.240\.0\.0/16#" calico.yaml
kubectl apply -f calico.yaml

检查master初始情况

root@k8s-m1:~# kubectl get nodes -o wide
NAME        STATUS   ROLES    AGE     VERSION   INTERNAL-IP     EXTERNAL-IP   OS-IMAGE             KERNEL-VERSION      CONTAINER-RUNTIME
k8s-m1      Ready    master   13h     v1.17.3   192.168.1.210   <none>        Ubuntu 18.04.3 LTS   4.15.0-91-generic   docker://19.3.7
k8s-node1   Ready    <none>   4h51m   v1.17.3   192.168.1.211   <none>        Ubuntu 18.04.3 LTS   4.15.0-91-generic   docker://19.3.7
k8s-node2   Ready    <none>   4h51m   v1.17.3   192.168.1.212   <none>        Ubuntu 18.04.3 LTS   4.15.0-91-generic   docker://19.3.7