BCB直接访问硬件端口和物理内存 WinIO的应用

http://www.cppfans.com/articles/system/portrw_winio.asp

(读硬盘参数和主板BIOS信息, 支持 Win9x/NT/2k/XP/2003)
(浏览 32444 次)

Victor Chen, (C++ 爱好者)

附完整的源程序(本页最下面的链接)

关于直接访问端口, 有很多网站很多文章都讨论过, 但总找不到非常理想的办法。
我这里用的是 Yariv Kaplan 的 WinIo 2.0。虽然 WinIO 也有缺陷, 但是是我用过的当中最好的了。
WinIO 是免费的, 并且是开放源代码的, 可以直接到他的主页下载, 也可以在这里下载。
Yariv Kaplan 的主页: http://www.internals.com/

WinIO 的使用非常简单, 在程序的开始调用 InitializeWinIo(); 初始化 WinIO, 在程序的结束使用 ShutdownWinIo();
这样就可以在程序里直接访问端口和物理内存了。

在这里仍然用的是读硬盘参数和主板BIOS信息。
本站在《硬盘参数读取程序》这篇文章里曾经介绍过利用 WinIO 读取硬盘参数, 很多人提出程序太复杂, 并且在程序启动时调用经常无效,
在这里简化了程序, 并且改善了性能, 在程序启动时调用也可读出参数了。

按钮Button1: 硬盘参数: 型 号: MAXTOR 6L040J2 序 列 号: 662202841232 固件版本: AR1.0400 容 量: 38172 Mb 柱 面 数: 16383 磁 头 数: 16 扇 区 数: 63 缓存容量: 1818 kb ECC 字节: 4 bytes LBA 支持: 是 DMA 支持: 是

按钮Button2: BIOS信息: Award Modular BIOS v6.00PG Copyright (C) 1984-2001, Award Software, Inc. 05/14/02 05/14/2002-i815-ITE87X2-6A69RPQRS-00

有关读写端口函数 inportb 和 outportb 等函数: 在 Win2000 等 NT 内核的 OS 可直接用汇编访问端口, 但 Win9x 反而不可以

#include "WinIO.h"
//---------------------------------------------------------------------------
unsigned char inportbNT(unsigned short p) { asm mov dx, p; asm in al, dx; return _AL; }
unsigned short inportwNT(unsigned short p) { asm mov dx, p; asm in ax, dx; return _AX; }
unsigned long inportdNT(unsigned short p) { asm mov dx, p; asm in eax,dx; return _EAX;}
void outportbNT(unsigned short p, unsigned char v) { asm mov dx, p; asm mov al, v; asm out dx,al; }
void outportwNT(unsigned short p, unsigned short v) { asm mov dx, p; asm mov ax, v; asm out dx,ax; }
void outportdNT(unsigned short p, unsigned long v) { asm mov dx, p; asm mov eax,v; asm out dx,eax;}
//---------------------------------------------------------------------------
unsigned char inportb9x(unsigned short p) { unsigned long v = 0; GetPortVal(p, &v, 1); return v; }
unsigned short inportw9x(unsigned short p) { unsigned long v = 0; GetPortVal(p, &v, 2); return v; }
unsigned long inportd9x(unsigned short p) { unsigned long v = 0; GetPortVal(p, &v, 4); return v; }
void outportb9x(unsigned short p, unsigned char v) { SetPortVal(p,v,1); }
void outportw9x(unsigned short p, unsigned short v) { SetPortVal(p,v,2); }
void outportd9x(unsigned short p, unsigned long v) { SetPortVal(p,v,4); }
//---------------------------------------------------------------------------
unsigned char (*inportb)(unsigned short) = inportbNT;
unsigned short (*inportw)(unsigned short) = inportwNT;
unsigned long (*inportd)(unsigned short) = inportdNT;
void (*outportb)(unsigned short, unsigned char ) = outportbNT;
void (*outportw)(unsigned short, unsigned short) = outportwNT;
void (*outportd)(unsigned short, unsigned long ) = outportdNT;
//---------------------------------------------------------------------------
void InitPortFuncs(void)
{
    OSVERSIONINFO osVer = {sizeof(OSVERSIONINFO)};
    GetVersionEx(&osVer);

    if(osVer.dwPlatformId == VER_PLATFORM_WIN32_NT)
    {
        inportb = inportbNT; outportb = outportbNT;
        inportw = inportwNT; outportw = outportwNT;
        inportd = inportdNT; outportd = outportdNT;
    }
    else
    {
        inportb = inportb9x; outportb = outportb9x;
        inportw = inportw9x; outportw = outportw9x;
        inportd = inportd9x; outportd = outportd9x;
    }
}

上面的程序 InitPortFuncs 就是判断操作系统是否为 NT 内核, 并且选择合适的函数来访问端口。
经过这样处理, 在 Win2000 下访问端口的速度就要比 98 的快了, Win2000 的速度比较理想。

具体程序: Button1 是读硬盘参数, Button2 是读主板BIOS信息

#include "WinIO.h"
#pragma link "WinIo_bc.lib"
//---------------------------------------------------------------------------
__fastcall TForm1::TForm1(TComponent* Owner)
: TForm(Owner)
{
    bWinIoInitOK = InitializeWinIo();
    if(!bWinIoInitOK)
    {
        Application->MessageBox("不能装载 WinIO 程序!","错误信息",MB_OK|MB_ICONSTOP);
        Application->Terminate();
    }
    InitPortFuncs();
}
//---------------------------------------------------------------------------
__fastcall TForm1::~TForm1()
{
    if(bWinIoInitOK)
        ShutdownWinIo();
}
//---------------------------------------------------------------------------
bool ReadHddParams(unsigned short *params, int pn, int dn)
{
    int i,IdePort[2] = {0x1f0, 0x170}; //primary & secondary IDE Controller
    unsigned char HD_Selection[2]={0xa0,0xb0}; // Master Disk: 1010 0000, Slave Disk: 1011 0000
    unsigned short BasePort = IdePort[pn];
    for(i=0;i<500;i++) //Get HDC Status, wait until HDC not busy
    {
        if((inportb(BasePort+7)&0x80)==0)
            break; //hdc is ready
        Sleep(1);
    }
    if(i>=300)return false; //HDC no response

    outportb(BasePort+6, HD_Selection[dn]); //master or slave hard disk
    outportb(BasePort+7, 0x10); //HDD status
    for(i=0;i<300;i++) //Get HDD Status, wait until HDD not busy
    {
        if((inportb(BasePort+7)&0x80)==0)
            break;
        Sleep(1);
    }
    if(i>=300)return false; //HDC no response
    if(inportb(BasePort+7)!=0x50)return false; //HDD ready: 0101 0000
    outportb(BasePort+6, HD_Selection[dn]); //master or slave hard disk
    outportb(BasePort+7, 0xec); //HDD parameters
    for(i=0;i<300;i++) //wait for parameters retrieved
    {
        if(inportb(BasePort+7)==0x58) //retrieved OK
            break;
        Sleep(1);
    }
    if(i>=300)return false; //parameters retrieved error
    for(i=0;i<256;i++)
        params[i]=inportw(BasePort);
    return true;
}
//---------------------------------------------------------------------------
void WordToStr(unsigned char *s, unsigned short *w, int n) //硬盘参数转成字符串
{
    int i;
    for(i=0; i<n; i++)
    {
        s[i*2] = w[i]>>8;
        s[i*2+1] = w[i]&0x00ff;
    }
    s[i*2]=0;
}
//---------------------------------------------------------------------------
void __fastcall TForm1::Button1Click(TObject *Sender)
{
    DWORD dwOldProcessP = GetPriorityClass(GetCurrentProcess());
    DWORD dwOldThreadP = GetThreadPriority(GetCurrentThread());
    SetPriorityClass(GetCurrentProcess(), REALTIME_PRIORITY_CLASS);
    SetThreadPriority(GetCurrentThread(), THREAD_PRIORITY_TIME_CRITICAL);

    AnsiString idename[2] = {"IDE0","IDE1"}, diskname[2] = {"主盘","从盘"};
    unsigned short params[256]; char Str[256];

    for(int pn=0; pn<2; pn++) //primary or secondary
    for(int dn=0; dn<2; dn++) //master or slave
    {
        Memo1->Lines->Add(idename[pn]+" "+diskname[dn]+":");
        if(ReadHddParams(params,pn,dn))
        {
            WordToStr(Str,params+27,20); Memo1->Lines->Add("型 号: "+AnsiString(Str));
            WordToStr(Str,params+10,10); Memo1->Lines->Add("序 列 号: "+AnsiString(Str));
            WordToStr(Str,params+23, 4); Memo1->Lines->Add("固件版本: "+AnsiString(Str));

            unsigned long LbaCap = *(unsigned long *)(&params[60])/2048;
            unsigned long NomCap = ((unsigned long)(params[1])*(params[3])*(params[6]))/2048;
            Memo1->Lines->Add("容 量: " + AnsiString().sprintf("%lu Mb",LbaCap>NomCap?LbaCap:NomCap));

            Memo1->Lines->Add(AnsiString().sprintf("柱 面 数: %u", params[1]));
            Memo1->Lines->Add(AnsiString().sprintf("磁 头 数: %u", params[3]));
            Memo1->Lines->Add(AnsiString().sprintf("扇 区 数: %u", params[6]));

            bool DMA = params[49]&0x0100; //D8:是否支持DMA
            bool LBA = params[49]&0x0200; //D9:是否支持LBA

            Memo1->Lines->Add(AnsiString().sprintf("缓存容量: %u kb", params[21]>>1));
            Memo1->Lines->Add(AnsiString().sprintf("ECC 字节: %u bytes", params[22]));
            Memo1->Lines->Add(AnsiString().sprintf("LBA 支持: %s", LBA?"是":"否"));
            Memo1->Lines->Add(AnsiString().sprintf("DMA 支持: %s", DMA?"是":"否"));
        }
        else
        {
            Memo1->Lines->Add("没找到硬盘");
        }
        Memo1->Lines->Add("");
    }

    SetThreadPriority(GetCurrentThread(), dwOldThreadP);
    SetPriorityClass(GetCurrentProcess(), dwOldProcessP);
}
//---------------------------------------------------------------------------
void __fastcall TForm1::Button2Click(TObject *Sender)
{
    HANDLE hPhyMem; //char *lpInfo = (char far *)0xf0000L;
    //下面的语句让 0xf0000 地址的 65536 个字节可直接读写
    char *lpInfo = MapPhysToLin((char*)0xf0000,65536,&hPhyMem);
    Memo1->Lines->Add(lpInfo+0xe061); //主板BIOS名称 0xFE061
    Memo1->Lines->Add(lpInfo+0xe091); //主板BIOS版权 0xFE091
    Memo1->Lines->Add(lpInfo+0xfff5); //主板BIOS日期 0xFFFF5
    Memo1->Lines->Add(lpInfo+0xec71); //主板BIOS序列号 0xFEC71
    UnmapPhysicalMemory(hPhyMem, lpInfo);
}
//---------------------------------------------------------------------------

最后写一下 WinIO 的缺陷:
会让纯DOS版本的程序无法接受键盘和鼠标事件, 可现在用纯DOS程序很少了, 所以影响不大。

---

直接访问硬件端口和物理内存-下载完整的程序源代码(BCB5,可以在BCB6下编译通过) 25,438 字节 (下载 7927 次)

源代码本址下载网址：winio_源码.rar

https://files.cnblogs.com/chulia20002001/winio_%e6%ba%90%e7%a0%81.rar