• HDU 4185 ——Oil Skimming——————【最大匹配、方格的奇偶性建图】


    Oil Skimming
    Time Limit:1000MS     Memory Limit:32768KB     64bit IO Format:%I64d & %I64u

    Description

    Thanks to a certain "green" resources company, there is a new profitable industry of oil skimming. There are large slicks of crude oil floating in the Gulf of Mexico just waiting to be scooped up by enterprising oil barons. One such oil baron has a special plane that can skim the surface of the water collecting oil on the water's surface. However, each scoop covers a 10m by 20m rectangle (going either east/west or north/south). It also requires that the rectangle be completely covered in oil, otherwise the product is contaminated by pure ocean water and thus unprofitable! Given a map of an oil slick, the oil baron would like you to compute the maximum number of scoops that may be extracted. The map is an NxN grid where each cell represents a 10m square of water, and each cell is marked as either being covered in oil or pure water.
     

    Input

    The input starts with an integer K (1 <= K <= 100) indicating the number of cases. Each case starts with an integer N (1 <= N <= 600) indicating the size of the square grid. Each of the following N lines contains N characters that represent the cells of a row in the grid. A character of '#' represents an oily cell, and a character of '.' represents a pure water cell.
     

    Output

    For each case, one line should be produced, formatted exactly as follows: "Case X: M" where X is the case number (starting from 1) and M is the maximum number of scoops of oil that may be extracted.
     

    Sample Input

    6
    ......
    .##...
    .##...
    ....#.
    ....##
    ......
     

    Sample Output

    Case 1: 3
     
     
    题目大意:抽象模型。用1*2的长条覆盖图中的"#",覆盖后变为"."不能覆盖到“.”。问你最多需要多少次覆盖。
     
    解题思路:最小顶点覆盖:用最少的点,让每条边至少一个端点被覆盖(选中)。我们可以按照格子的奇偶性划分二部。如果相邻位置都有“#”,就连一条边。最后求最大匹配即可。
     
     
    #include<stdio.h>
    #include<string.h>
    #include<math.h>
    #include<queue>
    #include<vector>
    #include<algorithm>
    using namespace std;
    const int maxn = 660;
    const int INF = 0x3f3f3f3f;
    vector<int>G[maxn];
    int Mx[maxn], My[maxn], dx[maxn], dy[maxn], used[maxn], dis;
    char Map[maxn][maxn];
    int lis[maxn][maxn];
    bool SearchP(int _n){
        queue<int>Q;
        memset(dx,-1,sizeof(dx));
        memset(dy,-1,sizeof(dy));
        int dis = INF;
        for(int i = 1; i <= _n; i++){
            if(Mx[i] == -1){
                dx[i] = 0;
                Q.push(i);
            }
        }
        int v;
        while(!Q.empty()){
            int u = Q.front(); Q.pop();
            if(dx[u] > dis) break;
            for(int i = 0; i < G[u].size(); i++){
                v = G[u][i];
                if(dy[v] == -1){
                    dy[v] = dx[u] + 1;
                    if(My[v] == -1){
                        dis = dy[v];
                    }else{
                        dx[My[v]] = dy[v] + 1;
                        Q.push(My[v]);
                    }
                }
            }
        }
        return dis != INF;
    }
    int dfs(int u){
        int v;
        for(int i = 0; i < G[u].size(); i++){
            v = G[u][i];
            if(!used[v] && dy[v] == dx[u] + 1){
                used[v] = 1;
                if(My[v] != -1 && dy[v] == dis){
                    continue;
                }
                if(My[v] == -1 || dfs(My[v])){
                    Mx[u] = v;
                    My[v] = u;
                    return true;
                }
            }
        }
        return false;
    }
    int MaxMatch(int ln,int rn){
        int ret = 0;
        memset(Mx,-1,sizeof(Mx));
        memset(My,-1,sizeof(My));
        while(SearchP(ln)){
            memset(used,0,sizeof(used));
            for(int i = 1; i <= ln; i++){
                if(Mx[i] == -1 && dfs(i)){
                    ret++;
                }
            }
        }
        return ret;
    }
    int main(){
        int T, cas = 0, n, m, N;
        scanf("%d",&T);
        while(T--){
            n =  m = 0;
            scanf("%d",&N);
            int N2 = N*N;
            for(int i = 0; i <= N2; i++){
                G[i].clear();
            }
            for(int i = 0; i <= N+1; i++){
                Map[i][0] = '.';
                Map[0][i] = '.';
                Map[N+1][i] = '.';
                Map[i][N+1] = '.';
            }
            for(int i = 1; i<= N; i++){
                getchar();
                for(int j = 1; j <= N; j++){
                    scanf("%c",&Map[i][j]);
                    if(Map[i][j] == '#'){
                        if((i+j)%2 == 0){
                            ++n;
                            lis[i][j] = n;
                            if(Map[i-1][j] == '#'){
                                G[n].push_back(lis[i-1][j]);
                            }
                            if(Map[i][j-1] == '#'){
                                G[n].push_back(lis[i][j-1]);
                            }
                        }else{
                            ++m;
                            lis[i][j] = m;
                            if(Map[i-1][j] == '#'){
                                G[lis[i-1][j]].push_back(m);
                            }
                            if(Map[i][j-1] == '#'){
                                G[lis[i][j-1]].push_back(m);
                            }
                        }
                    }
                }
            }
            int res = MaxMatch(n,m);
            printf("Case %d: %d
    ",++cas,res);
        }
        return 0;
    }
    /*
    4
    .##.
    ..#.
    .###
    ....
    4
    .##.
    ..#.
    .###
    ..#.
    
    4
    .##.
    ..#.
    .###
    ...#
    */
    

      

     
  • 相关阅读:
    Cayley's Tree Formula & Prufer's Method
    POJ 2262:Goldbach's Conjecture
    The Sieve of Eratosthenes (素数筛选法)
    POJ 2244:Eeny Meeny Moo(稍加变形的约瑟夫问题)
    POJ 1595:Prime Cuts
    iframe标签的使用
    js笔记
    Asp.Net知识点
    Reapte控件的使用
    浮躁十年
  • 原文地址:https://www.cnblogs.com/chengsheng/p/4955467.html
Copyright © 2020-2023  润新知