获取mac地址

使用方法

首先要生成一个可用的套接字描述符,TCP或UDP的都可以,为方便一般使用UDP套接字描述符
然后调用ioctl函数获取所有网络接口列表(struct ifconf), 网卡越多列表数目越多
再次调用ioctl函数从一个个网络接口中获取子项(struct ifreq)进行输出
每获取一个子项(属性)都要调用一次ioctl函数, 因为在struct ifreq中使用了union结构, 一次只能正确返回一个属性

接口结构

以下结构摘自net/if.h头文件中,头文件中定义了很多宏来简化结构成员的访问

struct ifreq   {
# define IFHWADDRLEN 6
# define IFNAMSIZ IF_NAMESIZE
    union {
        char ifrn_name[IFNAMSIZ]; /* Interface name, e.g. "en0".  */
    } ifr_ifrn;
 
    union {
        struct sockaddr ifru_addr;
        struct sockaddr ifru_dstaddr;
        struct sockaddr ifru_broadaddr;
        struct sockaddr ifru_netmask;
        struct sockaddr ifru_hwaddr;
        short int ifru_flags;
        int ifru_ivalue;
        int ifru_mtu;
        struct ifmap ifru_map;
        char ifru_slave[IFNAMSIZ]; /* Just fits the size */
        char ifru_newname[IFNAMSIZ];
        __caddr_t ifru_data;
    } ifr_ifru;
};
# define ifr_name ifr_ifrn.ifrn_name /* interface name */
# define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
# define ifr_addr ifr_ifru.ifru_addr /* address */
# define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */
# define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
# define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */
# define ifr_flags ifr_ifru.ifru_flags /* flags */
# define ifr_metric ifr_ifru.ifru_ivalue /* metric */
# define ifr_mtu ifr_ifru.ifru_mtu /* mtu */
# define ifr_map ifr_ifru.ifru_map /* device map */
# define ifr_slave ifr_ifru.ifru_slave /* slave device */
# define ifr_data ifr_ifru.ifru_data /* for use by interface */
# define ifr_ifindex ifr_ifru.ifru_ivalue    /* interface index      */
# define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */
# define ifr_qlen ifr_ifru.ifru_ivalue /* queue length */
# define ifr_newname ifr_ifru.ifru_newname /* New name */
 
struct ifconf   {
    int ifc_len; /* Size of buffer.  */
    union {
        __caddr_t ifcu_buf;
        struct ifreq *ifcu_req;
    } ifc_ifcu;
};
# define ifc_buf ifc_ifcu.ifcu_buf /* Buffer address.  */
# define ifc_req ifc_ifcu.ifcu_req /* Array of structures.  */

以下为ioctl在设置或获取套接字属性时的一些标识

int ioctl(int fd, int request, ... /* void *arg */);

/* Socket configuration controls. */
#define SIOCGIFNAME	0x8910		/* get iface name		*/
#define SIOCSIFLINK	0x8911		/* set iface channel		*/
#define SIOCGIFCONF	0x8912		/* get iface list		*/
#define SIOCGIFFLAGS	0x8913		/* get flags			*/
#define SIOCSIFFLAGS	0x8914		/* set flags			*/
#define SIOCGIFADDR	0x8915		/* get PA address		*/
#define SIOCSIFADDR	0x8916		/* set PA address		*/
#define SIOCGIFDSTADDR	0x8917		/* get remote PA address	*/
#define SIOCSIFDSTADDR	0x8918		/* set remote PA address	*/
#define SIOCGIFBRDADDR	0x8919		/* get broadcast PA address	*/
#define SIOCSIFBRDADDR	0x891a		/* set broadcast PA address	*/
#define SIOCGIFNETMASK	0x891b		/* get network PA mask		*/
#define SIOCSIFNETMASK	0x891c		/* set network PA mask		*/
#define SIOCGIFMETRIC	0x891d		/* get metric			*/
#define SIOCSIFMETRIC	0x891e		/* set metric			*/
#define SIOCGIFMEM	0x891f		/* get memory address (BSD)	*/
#define SIOCSIFMEM	0x8920		/* set memory address (BSD)	*/
#define SIOCGIFMTU	0x8921		/* get MTU size			*/
#define SIOCSIFMTU	0x8922		/* set MTU size			*/
#define SIOCSIFNAME	0x8923		/* set interface name		*/
#define	SIOCSIFHWADDR	0x8924		/* set hardware address 	*/
#define SIOCGIFENCAP	0x8925		/* get/set encapsulations       */
#define SIOCSIFENCAP	0x8926
#define SIOCGIFHWADDR	0x8927		/* Get hardware address		*/
#define SIOCGIFSLAVE	0x8929		/* Driver slaving support	*/
#define SIOCSIFSLAVE	0x8930
#define SIOCADDMULTI	0x8931		/* Multicast address lists	*/
#define SIOCDELMULTI	0x8932
#define SIOCGIFINDEX	0x8933		/* name -> if_index mapping	*/
#define SIOGIFINDEX	SIOCGIFINDEX	/* misprint compatibility :-)	*/
#define SIOCSIFPFLAGS	0x8934		/* set/get extended flags set	*/
#define SIOCGIFPFLAGS	0x8935
#define SIOCDIFADDR	0x8936		/* delete PA address		*/
#define	SIOCSIFHWBROADCAST	0x8937	/* set hardware broadcast addr	*/
#define SIOCGIFCOUNT	0x8938		/* get number of devices */

#define SIOCGIFBR	0x8940		/* Bridging support		*/
#define SIOCSIFBR	0x8941		/* Set bridging options 	*/

#define SIOCGIFTXQLEN	0x8942		/* Get the tx queue length	*/
#define SIOCSIFTXQLEN	0x8943		/* Set the tx queue length 	*/

获取mac地址实例

#include <sys/ioctl.h>
#include <net/if.h>
#include <unistd.h>
#include <netinet/in.h>
#include <string.h>
#include <stdio.h>
 
int main(int argc,char *argv[]) {
    struct ifreq ifr;
    struct ifconf ifc;
    char buf[2048];

//生成一个可用套接字描述符 
    int sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_IP);
    if (sock == -1) {
        printf("socket error
");
        return -1;
    }
 
//获取所有网络接口列表
    ifc.ifc_len = sizeof(buf);
    ifc.ifc_buf = buf;
    if (ioctl(sock, SIOCGIFCONF, &ifc) == -1) {
        printf("ioctl error
");
        return -1;
    }
 
//对子项进行操作输出
    struct ifreq* it = ifc.ifc_req;
    const struct ifreq* const end = it + (ifc.ifc_len / sizeof(struct ifreq));
    char szMac[64];
    int count = 0;
    for (; it != end; ++it) {
        strcpy(ifr.ifr_name, it->ifr_name);
        if (ioctl(sock, SIOCGIFFLAGS, &ifr) == 0) {
            if (! (ifr.ifr_flags & IFF_LOOPBACK)) { // don't count loopback
                if (ioctl(sock, SIOCGIFHWADDR, &ifr) == 0) {
                    count ++ ;
                    unsigned char * ptr ;
                    ptr = (unsigned char  *)&ifr.ifr_ifru.ifru_hwaddr.sa_data[0];
                    snprintf(szMac,64,"%02X:%02X:%02X:%02X:%02X:%02X",*ptr,*(ptr+1),*(ptr+2),*(ptr+3),*(ptr+4),*(ptr+5));
                    printf("%d,Interface name : %s , Mac address : %s 
",count,ifr.ifr_name,szMac);
                }
            }
        }else{
            printf("get mac info error
");
            return -1;
        }
    }
 
    return 0;
}